Good video, but pls, no background music. We want to here you.
@JWorldAdventures
Жыл бұрын
Thank you for letting me know!! I really appreciate it 👍
@michaelgiglio1571
2 ай бұрын
The 351c V8 have 1.65 or 1.76 rod ratio opions with factory rods. for 7000 rpm with 11 to 1 compression. In a street car, I'm concerned about side affects with a longer rod dwell. What would you recommend. .
@JWorldAdventures
2 ай бұрын
Hello! And thanks for the question. No I see no issues with your setup, if anything with an 11 to 1 compression ratio you shouldn't lose much bottom end. Plus with the longer rod to stroke ratio, you should be able to get a benefit of less cylinder bore wear.
@michaelgiglio1571
2 ай бұрын
@@JWorldAdventures Thanks for responding. Yes the shorter rod will give me shorter legs, so the longer rod will give me longer legs, and gives me a chance to upgrade the piston skirt and ring technology like you said. I think your are spot on. Mike
@damnmillennials3913
2 жыл бұрын
Thanks for the thorough explanation!
@JWorldAdventures
2 жыл бұрын
Thank you for the kind words!
@CNSRVTSM
2 жыл бұрын
Very informative video but please the musik is too loud I can almost not understand you turn the musik down a bit. Greetings Hause !!!
@JWorldAdventures
2 жыл бұрын
Hey There Hause2b2t, noted I will surely fix that in future videos. Thank you for letting me know. Hope you have a nice day!
@abreaux1777
2 жыл бұрын
Well put together informative video, but i can't hear what your saying because the music is so loud
@JWorldAdventures
2 жыл бұрын
Thank you very much for your input. I really appreciate it👍👍👍
@vijaypardhi7549
6 ай бұрын
The music is irritating
@dumpsterchicken6287
2 ай бұрын
Loose the music
@mylenejuan224
2 жыл бұрын
Boss gd eve,,boss where is more power more high speed long rod or short rod?? Thanks
@JWorldAdventures
2 жыл бұрын
Hey there @Mylene Juan! Thank you for the question. And in answering your question, a longer rod to stroke ratio would net you more potential power up top in the rev range, as a longer rod to stroke ratio essentially aids in improving cylinder filling in the upper rpms. Hopefully I was able to answer your question. Have a good one👍
@mylenejuan224
2 жыл бұрын
@@JWorldAdventures ok,,thanks boss,👍👍👍👍👍
@mylenejuan224
2 жыл бұрын
boss gd morning, where is high speed long rod or short rod???
@mylenejuan224
2 жыл бұрын
boss where is high speed rotate long rod or short rod,,
@JWorldAdventures
2 жыл бұрын
Thank you for the question. And in answering your question, that would be long rod if you would want to rev the engine higher and still gain Performance(at higher rpms) whilst not increasing the wear on the cylinder walls as a long rod configuration also reduces the wear on the cylinder walls, compared to a short rod that would benefit you in the lower rpms but would have more wear. Hopefully I was able to answer your question. Have a good one👍👍👍
@mylenejuan224
2 жыл бұрын
@@JWorldAdventures thank you boss,, good jod boss,,
@lenabecei5550
9 ай бұрын
Get rid of the music
@JWorldAdventures
9 ай бұрын
Thank you very much for your input!! I really appreciate it 👍
@vg23air
Жыл бұрын
This is a joke video right ?
@JWorldAdventures
Жыл бұрын
Not in the slightest. It's legit even the top level formula one teams use this principle in order to allow the engines to rotate high in the rpms with less thrust loading on the cylinders. As well as aid cylinder filling by means of the longer dwell time allowing to intake more air.
@stevenbloke3569
2 жыл бұрын
Please remove that music that crappy music.
@JWorldAdventures
2 жыл бұрын
Thank you for the heads up I greatly appreciate it.👍
Пікірлер: 26