thanks for the video. i wanted to see if anyone else had trouble with section 14 where you get the tip of the timing device through that hole and i see i wasnt the only one haha. great vid!
@silverbreezeRn
2 ай бұрын
Great video. I couldn't have done this without your video.
@joanshute3384
2 жыл бұрын
Rob you sure have patience. You did a Fantastic job on that clock. Aunt Joan Loves,,Loves, Loves your work. Great job. Thank you for sharing your talent with us. So until next time God Bless you and your family and have a Blessed evening and stay safe. ❤🦉❤
@izabela86r8
Жыл бұрын
Złożyłam pierwszy raz sama tą sowe, ale nie działała dobrze. Jakby nie miała "siły". Razem z Panem udało się naprawić moja sowe i działa bez zarzutów 😎 dziękuję 🙂
@rgauck
Жыл бұрын
Cieszę się, że filmik był pomocny. Proszę wybaczyć wszelkie powyższe błędy Użyłem translate.google.com
@beccad5073
Ай бұрын
My dude. I never comment on KZitem videos but I had to just say thank you for this! I was stuck in step 12, the gears just kept falling out all over the place. This video was so helpful, especially because I could compare with your model and see that some of my little yellow washers had gotten smooshed together and I needed to pry them back apart. I was ready to throw this in the fire pit! So thank you. Mine is now complete, though a little fragile. :)
@rgauck
Ай бұрын
I am glad you found it helpful.
@silverbreezeRn
2 ай бұрын
Im only at 16 minutes of video but you have helped me so much!! Thank you!!!
@rgauck
2 ай бұрын
I hope you find the rest of the video useful as well.
@diedrebrown6993
2 жыл бұрын
This is the best instructional that I have found. Thank you!
@rgauck
2 жыл бұрын
Thank you.
@ComoLaBash
2 жыл бұрын
Thank you! We've just started assembling and this is excellent help!
@rgauck
2 жыл бұрын
Let me know how it turns out for you.
@allancurrie8088
Жыл бұрын
Thanks so much for this video, , I've all most finished this model, just got the clock and face to do, the timer kind of works, I might have over tightened some parts??? Not sure., but it kind of works, but I'm not using it for the timer anyway, or the clock really, it's just a model, an will be on a shelf, as a talking point, I just enjoy making these models, I'm no professional, if it works great, if it don't work the way it supposed to, I ain't taking it apart again, ha., Great vid mate, great tips, on how to complete, 👍👍👍
@rgauck
Жыл бұрын
I am glad you found the video useful.
@user-gr2zu7nz5j
5 ай бұрын
I spray the parts with F 2 airplane wax. I also use it on my stain glass projects. Great for polishing your car, household furniture etc.
@rgauck
5 ай бұрын
Thanks, I will have to give that a try.
@NinaFultz
Ай бұрын
Any advice on how to proceed when one of the parts breaks? The tip of C11 broke off and now I’m stuck.
@rgauck
Ай бұрын
Sometimes I am able to use glue, sometimes that does not work. You should be able to get replacement parts here. www.rokronline.com/pages/part-replacement
@AgAusstar
3 ай бұрын
Hi, i would love to know in section 11 how to stop the gears from jumping out. I noticed you had some trouble too. Great video!
@rgauck
3 ай бұрын
Once it is fully assembled it does work better. Gear allignment is a issue I had. I just kept tinkering with the gears and frame to get the gear to allign.
@nostromo650
2 жыл бұрын
Mejor video de montaje del reloj buho. Gracias me hara falta ya que ese es mi regalo de cumpleaños 72
@rgauck
2 жыл бұрын
Feliz cumpleaños. Buena suerte con el reloj. Disculpe cualquier problema de gramática. Usé el traductor de Google.
@user-gr2zu7nz5j
5 ай бұрын
My 93rd Just finished an antique car and tram streetcar.
@maryse77778
Жыл бұрын
Thanks a lot! It works 😃 From France ...
@rgauck
Жыл бұрын
I am happy to hear that.
@nataliamigalska3484
3 ай бұрын
From where to get the element number P4? I cannot find it anywhere in the set
@rgauck
3 ай бұрын
P4 should have been in the plastic bag with the steel shafts. If your unable to find it you may be able to order a replacement part here. www.rokronline.com/pages/part-replacement
@markiobook8639
Жыл бұрын
1 hour 15 minutes? Dedication.
@annettepeacock9757
Жыл бұрын
I'm having trouble figuring out where the large spring attached
@rgauck
Жыл бұрын
The outer end of the larger spring goes in the slot on part E14 (section 10 page 11 for E14). I can send you a photo of the spring on mine if that would help. Please find my email address on the About page ( www.youtube.com/@rgauck/about ). Remind me of the puzzle and the spring.
@bilsmuslix5294
9 ай бұрын
Thank you my friend
@bilsmuslix5294
9 ай бұрын
From Geneva
@rgauck
9 ай бұрын
I am glad you found it useful.
@giblebro6898
2 жыл бұрын
Thank you, section 11 has been giving me quite the trouble...
@rgauck
2 жыл бұрын
Your welcome
@user-gr2zu7nz5j
2 ай бұрын
I reach that point. The small spring is missing. Very frustrating!
@user-gr2zu7nz5j
2 ай бұрын
Every kit that I have received from them has missing parts. The instructions are hard to follow. If you can deal with that, find them enjoyable.
@lorakarat8633
Жыл бұрын
Спасибо! ❤
@rgauck
Жыл бұрын
Пожалуйста. Я использовал переводчик гугл. Надеюсь, это работает хорошо.
@user-gr2zu7nz5j
5 ай бұрын
The kits always have missing parts. Takes weeks to get them. The engineering is first rate. A real challenge.
@rgauck
5 ай бұрын
Oh my that's not good. So far I have been very lucky when it relates to missing parts.
@user-gr2zu7nz5j
2 ай бұрын
I find the best way to get your needed parts are buy 2 units and return 1.
@vanessacomelli791
4 ай бұрын
Ma che cera devo prendere quella delle candele va bene ?
@rgauck
4 ай бұрын
La cera delle candele dovrebbe funzionare bene. Quando ho provato la cera per candele si trattava di piccoli pellet, quindi li ho sciolti in un pezzo solido di cera e ha funzionato bene. Si prega di scusare eventuali errori. Ho usato translate.google.com
@larissavolkova4154
Жыл бұрын
Danke! 👍
@rgauck
Жыл бұрын
Gern geschehen. Ich habe Google Translate benutzt. Hoffentlich funktioniert es gut.
@MMM-ym9rd
3 ай бұрын
does it work as actual clock ? and is it accurate ?
@rgauck
3 ай бұрын
There is a battery operated clock on one side and a timer on the other side. The timer uses the spring and pendulum. I have not tested it for accuracy.
@zapalblizh
10 ай бұрын
stuck on step 11, it always bounces off, any help? 😅😢. Did get it once but when i tried adding the gear it fell off again, honestly quite frustrates
@rgauck
10 ай бұрын
If your speaking about the two halves, B14 and B15 in Section 12 and D22 and D23 in Section 15 will help with that.
@zapalblizh
10 ай бұрын
@@rgauck no, i'm talking about the part where you have to insert the small spring, and it keeps bouncing off 😅
@rgauck
10 ай бұрын
I see what you mean now. C15, C16, C18 moved from the front of the clock very easily, There is nothing that really keeps it from moving. I can understand show the spring would slide out of E1. You may want to change the order in which D20, and D21 are installed on Page 13 (top left of page). The directions indicate D20 is installed first then 2 D21's. You might try installing D21 then D20 then the other D21.
@cslcsl-eo6hq
Ай бұрын
There's some missing parts in mine
@rgauck
Ай бұрын
You should be able to get replacement parts here. www.rokronline.com/pages/part-replacement
@azalilu
2 жыл бұрын
Merci , c'était d'une grande aide 👌
@rgauck
2 жыл бұрын
I am glad it was helpful.
@user-gr2zu7nz5j
5 ай бұрын
Great engineering but major problems with missing parts.
@rgauck
5 ай бұрын
You can get replacement parts here www.rokronline.com/pages/part-replacement
@aclockworkjj
Жыл бұрын
next time? rotate the video 180° please.
@rgauck
Жыл бұрын
Thanks for the suggestion. The videos I have made since May of 2022 are rotated 180 degrees.
Пікірлер: 62