Very kewl, Matt. Kudos to you for vlogging a build that was not performed by your shop just for the benefit of your subscribers. Very well-done build…not surprising considering it’s an RSD build. Roland’s PM heritage comes through on everything he does, albeit with his own twist. The nickel-plated accents are nice…not what would initially come to my mind for spec’ing a performance bagger build. I would like to have seen even more of that. If i had to change anything, it’d be the front-end. The Alloy Arts lower legs, with the Ohlins-style gold anodized fork tubes, Kraus radial caliper adapters, and Galfer floaters are all very nice high-quality stuff. I would have like to have seen RSD go full-Ohlins USD forks in a set of billet triple-trees (Kraus?) and Brembo T-Drive floaters to go along with those nickle Stylema’s and Corsa Corta racing master’s. Customer’s choice of course, and absolutely nothing wrong with any of it other than it’s not mine! I’m very envious. Keep the ultra-high quality content coming, Matt! Salute!
@adarngoodjoe4043
Жыл бұрын
Couldn't agree more about the hydraulic clutch. I do not like the cable and wish Harley would revert back to the hydraulic. I also agree with the belt drive. If there is ever a Police Pan America, I think it should be belt driven to reduce driveline maintenance (that's assuming the belt could withstand the power output).
@kennyirish5021
Жыл бұрын
A Tasty build right there, Hats off for the boys that built this one!!!
@ryanr4181
Жыл бұрын
i have to say that's the nicest Road Glide i ever seen by far..WOW
@DWRECKED91
Жыл бұрын
Not a bad way to spend 100 grand!!! Badass RG
@mojomanmurph1925
Жыл бұрын
One very nice top of the line build. It appears Matt had a blast riding this.
@oliverrojas3185
Жыл бұрын
Thanks, for sharing a very nice, impressive bagger. If you're into sportiness, it's definitely accessorised with a massive dose of sport appeal.
@marwannabe
Жыл бұрын
What do we think?! Are you kidding it’s mind-blowing 🤘🔥🤘
@lauriemoser4208
Жыл бұрын
I've got a 22 CVO Road Glide Limited with the 131 Stage 4. But that carbon fiber is awesome and a lot of really cool bits on that one.
@lauriemoser4208
Жыл бұрын
@Telegram me 👉 @ Mattlaidlaw1 how do I do that?
@niagarawaygmail
Жыл бұрын
Fuck that put a Trask turbo on yours 1st
@lauriemoser4208
Жыл бұрын
You throw the Screaming Eagle catalog at it.
@lauriemoser4208
Жыл бұрын
@@niagarawaygmail I don't think I need it. Maybe after the warranty runs out
@adriangreen7561
Жыл бұрын
Great looking bike pique my interest in one similar Rolling Sands and the rest of the parts that were on it awesome look. I'm ready for a new one similar to that look
@fps636
Жыл бұрын
Extremely well done, deserves the showing you gave, enjoyed, thanks.
@4wdiesels
Жыл бұрын
That bike looked really good going 65mph down the freeway! 😉😉😉
@Bted__ever
Жыл бұрын
Exactly "65 mph" lmao 🤣🤣
@louismarino5448
Жыл бұрын
💲💰💲💰 RSD makes top notch gear
@AkaBull
Жыл бұрын
Did I miss the Born free bikes videos? I thought you guys would have made a video about the bikes your team made.
@bradwilliams4921
Жыл бұрын
Very nice Custom. Thanks for the review.
@NorCal-refrigeration
Жыл бұрын
Awesome overview! Nice bike!
@indianbill3123
Жыл бұрын
i just installed Wilbers on my 2022 RK….makes for a beautiful ride
@heybruh3274
Жыл бұрын
So many fantastic bikes - so little money. Thanks for sharing this build. Such detail all the way down to the Figurati Swing Arm covers! Like the commentary on the hydraulic clutch and belt drive. Wonder why no digital gauges with more outputs related to the bike's operating parameters? And with that - still trying to figure out what level of silliness it is to have a radio on a bike like this though. (yes, I know it gives more than music..... but there's just gotta be something more meaningful that could fill this space)
@michaelmitchell5909
Жыл бұрын
Wow, awesome bike.,....wonder why he didn't use bst carbon wheels?....either way still an unbelievable road glide
@TKinMB
Жыл бұрын
Thx for clearing up the belt/chain thing. I feel the exact same way.
@drylandswim
Жыл бұрын
So . . . how much? Do you know or would you guess?
@shane8493
Жыл бұрын
Really cool bike, I just know having a torque cam over a hp cam is better on a bagger. Running high rpm’s and bad gas mileage isn’t for me. My 128 Screamin Eagle kit with a S&S 540 gets 43 mpg & it stinking rips.
@freebehindbars8654
Жыл бұрын
Wonder what to total cost for the bike and built would cost?
@freebehindbars8654
Жыл бұрын
Bc I see thousand dollar bills everywhere I look on that bike. It is badass.
@jeffdavis5723
Жыл бұрын
☝🏼 *The **#SPAMMER** is back **#Matt**.*
@Jonathan-L
Жыл бұрын
At a first glance, I thought Matt was riding at 106.7MPH ... then I realised it was the frequency of the radio station :)
@bluesriderDF
Жыл бұрын
No, he wasn't going that slow 🤯
@jeffdavis5723
Жыл бұрын
@@bluesriderDF *The **#SPAMMER** is back again‼️* ☝🏼 🤔 😡 🛑
@tetlow2
Жыл бұрын
Those floor boards look awesome. I really like the nickle
@Серж-л1н
Жыл бұрын
240Km.ч
@alfredomiranda7002
Жыл бұрын
Nice build. Thank you for the great content.
@johnmacias01
Жыл бұрын
Oh yeah nice bike with the RSD touches!
@raywright7996
Жыл бұрын
PRETTY PLEASE CAN MINE BE IN LICQIED OXYGEN WITH NITRO GLIECRN
@raywright7996
Жыл бұрын
HARLEY DAVIDSON CAN I HAVE ONE IN DRIVING EXPERIENCE IN DRIVING SHAFT
@kimmarshall6047
Жыл бұрын
Theres something about a black Harley they look so good.
@josephgriffin1065
Жыл бұрын
Love the nickel finishes
@juniorcarrillo3196
Жыл бұрын
What kind of mirrors are those? They are dope.
@journeyofjerry820
Жыл бұрын
I'm looking forward to seeing what you do with MDB road king.
@michaelcaceres4719
Жыл бұрын
Bike is sick. But needs a black chrome or smoked chrome exhaust like on the blue steel CVO.
@TheCuttz1984
Жыл бұрын
Super hot. Love the carbon. That saddleman Colab looks smooth also
@LawrenceBroussard
Жыл бұрын
Beautiful bike, and ouch on the gas, but fun cost!
@ratephi
2 ай бұрын
Awesome bike and great content, Matt!! Would you have info on who makes the top triple tree cover with accessory buttons slots? Looks very clean.
@sprather4642
5 ай бұрын
I noticed they had to use molding/trim on the Carbon Fiber front fairing. To where it lines up to the bikes dash. Had to do the same thing on my Carbon front faring because the fitment wasn't as good as the factory faring. I won't name what company mine is because they were very cool and have great customer service. I have seen the carbon visionary and no molding/trim was needed.
@g4dan1
Жыл бұрын
Wow! Is the only thing to say.
@MonsterElectric
Жыл бұрын
If I ever have half a bike as cool as that I will be grateful. Then again, I will be grateful for a stock bike.
@justinchase5499
Жыл бұрын
Just a quick?....why does everybody and there grandma call them t bars....them are NOT t bars. Them ARE bars and risers...t bars are 1 piece
@ChrisCall-fn7rk
Жыл бұрын
Was the Cruise Control able to be retained when changing to Brembo hand controls?
@tcard2008
Жыл бұрын
Killer bike Matt. I know this a old post but it just popped up on my feed today. I really like the triple tree cover with gauge relocation. Went to there web site not listed so I take it’s not being produced? If u have any info or know of any other companies making something similar would be greatly appreciated.
@northrider8628
Жыл бұрын
Good looking bike. Really would look awesome done with the batwing 😉
@brakinggnus5229
Жыл бұрын
Yup. Perry done good!
@brakinggnus5229
Жыл бұрын
i'll get you, sucka
@bigjohnson9561
Жыл бұрын
Sweet ride!!! I really like those upgrades!!!
@victorjohnson2093
Жыл бұрын
Very Nice Thanks 😊
@kenkenyon444
Жыл бұрын
Awesome bike Matt you guys do beautiful work as does Roland !
@willyafg
Жыл бұрын
That triple tree cover is long overdue for road glides with the bar and riser set up. Idk if anyone actually sells them yet. If yall know please tell me
@Mm-xr1rw
Жыл бұрын
So sick
@robertduffner6346
Жыл бұрын
I’m really curious do you know what exact risers bars and triple trees were used on this build, it’s sexy :)
@CareyThomas-kc4ow
9 ай бұрын
Gorgeous. Not liking the bags being that high on the bike. But that's just a personal thing. First class all the way
@schraubfix69
Жыл бұрын
Exzellentes Bike, super Komponenten! Ich bin begeistert von eurer Arbeit.
@FenTour
Жыл бұрын
I am in love....
@JS-nf1sn
Жыл бұрын
That's a vulgar display of power.
@MattLaidlaw
Жыл бұрын
Why yes it is.
@thexnewyorker7284
Жыл бұрын
What type of fork lock is that ? That would eliminate my issue with my Kraus risers
@InfamousCreep
Жыл бұрын
Nice build. Maybe once I’m done paying off my FXLRS, I’ll pick up a RG.
@LifeTrod
Жыл бұрын
Sir, this is nice!
@tommiller8714
Жыл бұрын
Riding (steady state cruising) down the highway well into the upper rpm (downright high rpm's) and getting 20 mpg (65 miles & 1/2 tank of gas)...are you kidding? My '21RGS, 114 stock compression (10.5:1) Stage-2 (S&S 465 cam, ported S&S 55mm intake manifold, S&S 2-1 Sidewinder w/catalyst, Fuel Moto/K&N 3956 Ventilator Style A/C, and Tuned with Dynojet PV3b) pulls like a freight train from below 2,000 rpm to 5000 rpm and averages 46.4 mpg steady state cruise at 70-75 mph highway. Very enjoyable to ride in town and on the highway. Tom M.
@Blynd_HD
Жыл бұрын
What ignition switch is that?
@johnnycheese4532
Жыл бұрын
SWEET!
@John-cc1pc
Жыл бұрын
Saucy 🤜
@berealz9701
Жыл бұрын
That beautiful front end should've been inverted
@DeBa1226
Жыл бұрын
Great content Matt! Hey we’ve got one of our own in need. Don’t know if you’re sub’d with Itchymoche n Vee….. great brother been giving us great content along time, great stories to share. Check out his latest video. His wife’s really been battling. Thanks bro.
@BadBlue32
Жыл бұрын
Wow!! I wasn’t super high on the ST before seeing this build. There’s nothing I don’t like on this bike! I’m sure he paid a fortune for it, but man did they ever do it right! Absolute beast! Thanks for posting!
@azvoltmanphoenix446
Жыл бұрын
Just frikken WOW.........
@austinap2248
Жыл бұрын
I have a Hoffman front fender on my SGS and it was $500. I can't imagine how much all that fiber cost on this bike.
@filmcostar
Жыл бұрын
cool, are thee RSD parts available for purchase at Laidlaw's and the BBQ grill lumber rack looks cool
@buddylove9484
Жыл бұрын
Perfection on all the changes.
@sharkzf6
Жыл бұрын
Really nice! Of course, it's what I would expect from RS studios! 😎
@robertsoucy9725
Жыл бұрын
BOMB ASS ROAD GLIDE! RSD is on a Roll. 124ci is the perfect motor for the RG!
@koolkat8639
Жыл бұрын
Downside of spending that much , I wouldn’t want to take it on long trips haha I’d be worried about scratching the bike or just worried about putting too many miles on it
@bobandtams
Жыл бұрын
Very nice build, looks like agood ride.
@sportyonetaubert5923
Жыл бұрын
Super sweet ride Matt! Thanks for sharing it with us! My brother made me laugh the other day when he called a new Harley a "starter kit" ! 🤣
@talkingrock7011
Жыл бұрын
Nice Build Very Nice
@trex860
Жыл бұрын
Legit build.
@brentkelly2743
Жыл бұрын
For me it’s absolutely gorgeous I would give my right arm for one. Would love to have a rough idea on the value of this beauty though. Great video as always Matt.
@neano62
Жыл бұрын
I’m getting “Older” I’m gonna keep my 🤐
@krzysztofwojtanek511
Жыл бұрын
😮😮😮
@drsparwaga
Жыл бұрын
Nice bike. The only thing I never liked about these builds is the gauges blocking the view of the screen.
@jonlenon22
Жыл бұрын
Mantap bos
@jeffdavis5723
Жыл бұрын
*Thanks **#Matt** for another great video.* ❤ 👍🏼👍🏼👍🏼👍🏼 💗
@dynaordie8083
Жыл бұрын
Matt Laidlaw doin videos for Roland Sands, that's pretty cool man. Matt is a good dude.
@nigelleahy406
Жыл бұрын
Class bike and a class video as allways thanking u matt
@MattLaidlaw
Жыл бұрын
Thank you !
@thomasangelo4219
Жыл бұрын
Everything that was done to the motorcycle really fits it well Really cool Thanks for the video take care
@a-a-ronenduro6969
Жыл бұрын
Not much Harley left. 🤣 Amazing build!
@bishopruger
Жыл бұрын
What an awesome Road glide, very nice. Love the nickel accents.
@Carnivoredj
Жыл бұрын
What passenger seat is that as I’m looking to find a detachable for my road glide?
@robbiehutslar5509
Жыл бұрын
That's a nice build! Badass looking and looks like a blast to ride! Thanks for sharring Matt! 😎👍
@RoadKing-zl4jj
Жыл бұрын
Gorgeous 😍
@raywright7996
Жыл бұрын
RIDE TO LIVE AND LIVE TO RIDE
@jimmiehoyt729
4 ай бұрын
150 thousand dollars? I'm probably short on the amount
@Moto_Steve_Adventures
Жыл бұрын
Probably the sickest RG I’ve seen. Love it!
@tallmike6598
Жыл бұрын
The nickel plating is a nice touch..
@raywright7996
Жыл бұрын
MAY I VOLUNTEER MASTERS DEGREES ENGINEERING
@sockgaggedlee
Жыл бұрын
HOT!
@jeffdavis5723
Жыл бұрын
☝🏼 *#SPAMMER** needs to be removed and blocked **#Matt**‼️* 🤔 😡 🛑 👎🏼
@tccorp1773
Жыл бұрын
where did you get those heat shields ???
@FXLRS114
Жыл бұрын
Cool and nice bike we really enjoy the video Matt 👍🏻
@roadglide
Жыл бұрын
100% Matt! Nothing was left untouched. Superb workmanship here. You won’t see to this out at your local IHOP. Although you might if it’s this bike and he likes pancakes. Good stuff.
Пікірлер: 157