Great tip. It's always been a minor niggle that a time based effect like reverb doesn't have it's own time control like delay.
@MiCtiSilen
3 жыл бұрын
Thank you so much to your all tips. Now I am learning MC 707 with your videos too (Tnx so much) and maybe than my dream is to have drum groovebox TR-8S. I love watching your videos. Many new ideas, great music productions and GOOD LUCK
@sergiocollares8216
3 жыл бұрын
Hi Unit:E! I would like to thank you for all those (helping) videos you've done so far. Really nice from you. Cheers man!
@UnitE808
3 жыл бұрын
Glad you like them!
@johnmelas3118
3 жыл бұрын
I agree- thanks again!
@andreskio666genoma8
3 жыл бұрын
gold
@seanleeduncan
3 жыл бұрын
Sweet! Thanks
@indigomaterie
3 жыл бұрын
Me: "I know everything about my TR-8s" Unit:E Puts a new video up! Me: "You can do this???" Thanks, pal!
@UnitE808
3 жыл бұрын
Lol! Glad I can still surprise some of you! Thank you for all your support!
@georgesprackling6210
3 жыл бұрын
Indigomaterie ,Can master effects, be put on to different out put channels, Other than the mix.
@UnitE808
3 жыл бұрын
@@georgesprackling6210 no, they cannot.
@seanleeduncan
3 жыл бұрын
Tried to obtain those sliders but Roland UK don't have any!🙁 If anyone knows where I can get a set, pls let me know🙏🙏🙏. I know copies exist but I've heard they don't feel as good.
@UnitE808
3 жыл бұрын
They feel great! They were given out at conventions.
@grzzl
2 жыл бұрын
lovely, thx for the trick! also: is it possible to set the Reverb in steps, like on the old TR-8?
@UnitE808
2 жыл бұрын
Absolutely! Without any instrument selected. Hold a step and turn the reverb knob. Try this with the delay knobs, and master fx button and knob.
@2cv
2 жыл бұрын
@@UnitE808 🙏hooray! thxalot!
@georgesprackling6210
3 жыл бұрын
It would be good, if you could have master effects on different output channels. So you can mix you drums better. Maybe I'm missing something.
@UnitE808
3 жыл бұрын
The assign outs are meant to send a dry signal to outboard gear for processing or fx.
@vladagordanic574
2 ай бұрын
Can you use reverb on external instrumet and how pls?
@UnitE808
2 ай бұрын
Yes! Hold shift and press KIT. Keep holding Shift and scroll the value knob until the top category line on the screen says Ext In. Let go of shift and scroll to reverb send. Delay send is the parameter right after. Press Enter on either of these and use value knob to adjust amount. Holding shift while adjusting amount will cause the value to change in bigger increments.
@vladagordanic574
2 ай бұрын
@@UnitE808 Thank you very much Sir 🙏
@hybridalgotrading
4 ай бұрын
where u find this knobs??
@UnitE808
4 ай бұрын
Roland gave them away at conventions a few years ago
@hybridalgotrading
4 ай бұрын
@@UnitE808 they are amazing
@mikehemens9359
3 жыл бұрын
How do I live record. I want a blank pattern and the tr8s I bought is filled with patterns I don't want that seem to be in my way here. I can't find on the internet this first step to get me moving.
@UnitE808
3 жыл бұрын
Patterns 8-03 and higher should be blank. If you want to blank out another pattern, select Patten Select mode and hold clear and press the pattern number on the steps of the sequencer. That should erase all sequencing. You will still need to select a kit to use. If you are having trouble getting going on the unit, I recommend taking the cloud academy classes. They are filled with a ton of info!
@mikehemens9359
3 жыл бұрын
Thanks to take the time to reply that helps.
@Mike-Volt
3 жыл бұрын
Can you get the reverb on one channel and it doesn't effect the other ones with this shortcut?
@UnitE808
3 жыл бұрын
Not with this specific shortcut. To adjust the reverb send of each instrument, hold the instruments button (bd-rc) and turn the reverb level knob.
@whywe1601
3 жыл бұрын
dude where did you get those killer multi colored knobs?
Пікірлер: 34