Brilliant commentary especially with the "grunge" found! Very well presented, informative and detailed with humour. Thank you for providing this detailed strip down, reassembly.
@MichaelKogler-t7b
14 күн бұрын
i'm from germany and speak some english, but didn't hardly understand that guy. but his video was great! it helped me perfectly with my problem
@jjaylad
Жыл бұрын
Hi there! Thanks for taking the time and effort to do this! Really informative. I have a York, (same as Hanimex) which seems to be the same functional design. I pulled the lamp out and stuck a 60w bulb in there ...plugged into 110v and also pulled out the lens and condenser lens. I put a piece of plastic diffuser in front of that lightbulb. Next I position my DSLR camera so it can shoot into the lens opening of the projector and take pictures of the slides. I load the slides into a stack loader, use the auto advance and a remote shutter release for the camera, and take pictures of the slides so I have them on digital. I digitize 36 slides in about 5 minutes that way. The camera is tethered to my laptop so the images are imported as they are taken. The main problem is dust on the slides, which gets picked up very clearly by a 24 megapixel camera! That makes for extra work in Photoshop or Lightroom or both. I'd like to disconnect the fan but from what you have shown here, the fan motor runs the entire carnival. Am I interpreting that correctly ...that disconnecting the fan would shut the whole thing down?
@scienceistruth1924
Жыл бұрын
I have a similar model with the same issues, the carriage not feeding, this has been really useful as I couldn't figure how to dismantle the thing and as you say there are no instructions anywhere else. Thanks for your time making this
@onair1360
Жыл бұрын
Thanks - I have received a lot of help from KZitem videos over the years. I am glad to pay back to the community out there. Good luck - and any questions, just ask.
@emck5166
Жыл бұрын
Thanks mate, you made my day. Just bought same model, & well versed in all projectors, but struggled to get case off. Just wanted to change belt. Slides advancing but struggling in reverse. Forgot to take slide arm off. Top case tight fit to chassis. Quick spray with wd40 on slide change, changed belt for new one and all good. Bugger to get case back on, protrusion on top of case has to go behind circuit board, in case it gets pushed in when inserting plug etc. After watching the case opening on your vid, I worked on my machine, and all good. Now having watched the rest of your vid, we both had same problems, eg circuit board. You much more patient than me, taking it all apart, but over the next few years you will get many thanks for your video, so thanks from me. Eric
@marcb8874
5 ай бұрын
MERCI pour cette vidéo .au mins vu pour le démontage ayant un problème de courant sur l'arrivé de la lampe pas de 24 v
@BD-bditw
6 күн бұрын
So pleased to find this on KZitem today. I've just unpacked my P355 which is identical to this one. I noticed a small metal leaf spring had fallen out from somewhere. The feeding would jam occasionally. How good it was to see the little spring at 13.05 - exactly the one that's fallen out. I'll go now, before watching anymore to see if I can get the spring back in without stripping the whole thing down. I'll report back. Thanks so much for this great upload. Guys like you must save people so much expense over the years. Too much stuff ends up in landfill and usually it's something quite simple that causes these things to be scrapped. is it possible to convert said unit to LED rather than the Quartz Halogen bulb?
@BD-bditw
5 күн бұрын
Thank you. It's now fixed. Unfortunately the 'Reverse' feed does not work, but I can live with that.
@onair1360
5 күн бұрын
@@BD-bditw Thank you for your feedbacck. I am pretty sure that if you did take the plunge and remove all the old lubrication grunge and relube the cogs, it would be as good as new. I did start hoping for a quick fix but in the end I went all-in. Sooner or later I think you will need to do the same. I agree, we need to keep these old treasures working! As for LED bulbs - wel your guess is as good as mine I am afraid. Stock up on what you can get.
@PabloCoronel70
2 ай бұрын
do you know the belt size? Im going to open mine and will change the belt anyways Thanks again, relubed the slide-transport mechanism, and the fan/motor
@MrCpharch
3 ай бұрын
sorry can not use photo,so i use simple image shape to show。
Пікірлер: 16