Hey man, just wanted you to know that I fixed my SLX DC with your tips here. You saved me a bunch of money and time. Thank you so much
@utmostfishing1403
4 ай бұрын
Tight lines,, glad that helped
@chrissutton8354
3 ай бұрын
Trying to fix a DC as well but I don't have the right sized wrench for the reel piece.
@stephensands3485
3 ай бұрын
@@chrissutton8354 I just used needle nose pliers for the nut piece
@chrissutton8354
3 ай бұрын
@stephensands3485 I tried that but I basically sheered the nut. I'll have to give it another go then.
@justinpope2429
2 ай бұрын
Just fixed the problem on my quantum reel, thanks for the video
@zainolabidin6745
Жыл бұрын
Your video is awesome. Today I cleaned the anti- reverse cluth on my USD 20 cheap bc reel. It works as you said. Thanks a lot man.
@utmostfishing1403
Жыл бұрын
Really glad that helps
@farhaadsayed9697
Жыл бұрын
You are my hero! I saved alot of cash thanks to this vid!
@steveokon5431
Жыл бұрын
Thank you sir for sharing this information!! Good job
@edorame1194
5 ай бұрын
Just cleaned mine, and it works again. Thanks, bro
@utmostfishing1403
5 ай бұрын
Glad that helped
@alexiskaburnejev5165
Жыл бұрын
U smart as hell thank you so much for your help.
@utmostfishing1403
Жыл бұрын
Really glad that helps, tight lines
@irfanzakwan3061
Жыл бұрын
Thank you so much sir , that was very helpful . Now i can saved my money🙏
@irishvikingpastor9994
Жыл бұрын
That was very helpful! Thank you sir
@utmostfishing1403
Жыл бұрын
Glad that helps
@dennypescador
8 ай бұрын
Thank you for helping me with this issue. Subscribed :)
@utmostfishing1403
8 ай бұрын
Glad that helps,,, tight lines
@juedeing135
7 ай бұрын
Thanks for sharing, i’ll try to clean and hopefully it back work as normal again 👍🏻
@keithgyulveszi163
8 ай бұрын
Thank you! Very helpful
@jimelam8058
9 ай бұрын
Great video. FYI I have cleaned AR clutch without disassembling rollers from cage by GENTLY spraying small amounts of carb cleaner into AR assembly slowly until visibly clean. Clean outside of sleeve, then allow AR assembly to air dry overnight. Reassemble after tiny bit of oil to AR assembly and most of the time you are good to go
@utmostfishing1403
9 ай бұрын
Will definitely try your way for my next cleaning, thanks
@treya4872
Жыл бұрын
saved me money and i can keep using my reel, thanks
@utmostfishing1403
Жыл бұрын
Glad that helps
@PuraSalAngler
10 ай бұрын
Awesome video - thank you for the info - I have and abu Garcia that’s doing just that -
@MHELJHUN_ANGLER
11 ай бұрын
Thank you so much bro
@johnguzo6522
5 ай бұрын
Cleaned many of them. I have a mini arbor press to pop them out of reels. Be careful the plastic cage has little plastic fingers if the are broken off or missing it won't work. Some of the daiwa baitcast reels the O.D. of the clutch is perfectly round. The whole clutch will spin backwards a little 2 part epoxy will fix it.
@utmostfishing1403
5 ай бұрын
Thanks for the tpis
@franxiscoalfaropesca
3 ай бұрын
Thanks
@bennykxbennykx7970
9 ай бұрын
Good video bro I like it ,👍👍👍👍👍👍👍👍👍
@utmostfishing1403
9 ай бұрын
Thanks bro, tight lines
@defbear
9 ай бұрын
What type of cleaning product did you clean the bearing with?
@utmostfishing1403
9 ай бұрын
If you purchase fishing reel cleaner kits, it normally comes with cleanser ( thinnest liquid), oil and grease. Any brand should work. Use the cleanser to wash, then dry, then reapply the new oil or grease.
@gofishing2903
Жыл бұрын
I’m having an issue getting the roller clutch out of a revo sx any tips?
@utmostfishing1403
Жыл бұрын
Some rollers stuck due to the age of reel, dry, rust, dirt and so on. I would try to spay degreaser and leave it for minutes to loosen it from the side plate. Good luck
@brendon_edwards_fishing
6 ай бұрын
Wow...assume...definitely worked...almost chucked in garbage..
Пікірлер: 37