No boat shop is complete without classic rock on the radio. Good job guys! Man, I miss painting.
@svwhimsy2443
4 жыл бұрын
Tell us more about the foam roller, (8:05)
@sirlandsalot
3 жыл бұрын
it says on the can that this product is not for below the water line? why are you painting below the waterline?
@Frank7748124
2 жыл бұрын
Because a dinghy does not live in the water. It is only below the waterline for brief periods; which is okay for this application.
@KMURRAY1841
4 ай бұрын
Awesome video. Purchasing thanks to this.
@jamesvaughn2973
3 ай бұрын
Great video will this polyurethane work on aluminum boats also?
@Seregium
Жыл бұрын
Nice lil boat! I want one too but it is expensive for me now.
@dimitristripakis7364
4 жыл бұрын
That's very nice. Can you feed this paint (and primer) into an airbrush pistol ? Or you have to use the roller ?
@Gantzz321
4 жыл бұрын
watching that first guy try his hand at painting was painful to watch. It seemed he had informational overload and didn't retain anything as a result.
@brandonh2122
6 жыл бұрын
Looks amazing for no tipping! You weren’t left with any air bubbles at all?
@MrAnythinggood
4 жыл бұрын
Brandon Hoo I hardly tip anymore foam roller then second pass back roll knocks bubbles out
@sandywilson8169
Жыл бұрын
Thx.. like it, is that a '57 Panel in the background
@RichieKeane
3 ай бұрын
fantastic finish and no tipping?
@be2withyourcow
3 жыл бұрын
Can I use a two component epoxy filler in between the sanding and the final finish coat? I have some little pits and scratches that didn’t get filled with paint, I want to fill them after sanding the primer coat.
@dinopaliska8872
5 жыл бұрын
unless you are in a in a 72 degree area need to sand with 1000 then buff and keep a bug netting up too before painting
@robinwallberg
4 жыл бұрын
Which color is used? Number 875 maybe?!
@truckerdaddy-akajohninqueb4793
3 жыл бұрын
Does the thinner help in the self-leveling? What about buffing the final product to get a glass finish?
@drewthompson7457
4 жыл бұрын
I've heard that 2 part paint is no longer availablr in Canada. Is this true for your product? I haven't used your paint yet, but your varnish is my first choice.
@paulbaird1351
3 жыл бұрын
I'm interested in this for a small carbonfiber hull. Can you get glass like finishes with wet sanding and buffing after two coats of color?
@steveng6269
3 жыл бұрын
How much paint do you load the brush with for tipping?
@gabbermaikel
4 жыл бұрын
how is the poly urethane strength wise compared to the epifanes mon urethane? I have my boat in the epifanes mono urethane for a number of years now, but it can scratch pretty easy in my opinion. It also developed some cracks in the paint now after i think 5 years of it being on. So i was thinking maybe the poly urethane wil stay on longer? It is a steel boat, so i want the paint to cover it as good as it can because i dont want rust on it.
@alisonaussie4995
3 жыл бұрын
So, if there is a repair to do on this later, how easy is it to patch a repair in and does it blend nice or can you not do that?
@_Common_Logic_
3 жыл бұрын
@Kade Brendan You two again?... SMH
@jasongiller2899
5 жыл бұрын
Change the station??? Try working to that type of music and maybe you can get something done. Good music to work to
@torstenbehrendt870
5 жыл бұрын
Never use bare cardboard for mixing. The surface will soak up components from either component and therefore corrupt your mixture. Put some masking tape on the cardboard first.
@crunchycrispybacon
5 жыл бұрын
bullshit, it doens't absorb enough to make any noticeable difference. The mixture doesn't need to be perfect down to the last atom.
@soldozer
3 жыл бұрын
BS old wives tale. Ive been doing bodywork and painting show cars for 27 years.
@carlos92fs87
6 ай бұрын
dumb question but how do you measure 7 percent of paint thinner
@aquious953
3 жыл бұрын
I have 120 grit for pre primer sanding, and 320 for sanding the primer pre paint. Is that ok?
@abatel234
3 жыл бұрын
This taint solutions, poly urethane, can be aplly over epoxy lamination repairs? Thank you so much!
@denttech5135
5 жыл бұрын
Why not spray it?
@shooter7a
4 жыл бұрын
How tough it this paint? Can it be used for other applications? Specifically....can I paint my tractor with it?
@freedivert
4 жыл бұрын
Take a look on Sigma Coating paints.
@alexanderzonjee3920
3 жыл бұрын
Without a problem!
@mcroman-superfeat
5 жыл бұрын
THX for showing ...
@scottjess1556
6 жыл бұрын
It looks fantastic 👍
@chowing08231
Жыл бұрын
would it work on Polystyrene materials?
@johnboylong40
6 жыл бұрын
No link to Purchase?
@mcroman-superfeat
5 жыл бұрын
Look above ...
@johnnya9001
5 жыл бұрын
No tipping off?
@dinopaliska8872
5 жыл бұрын
wet sand and buff after works great
@basilbrush7335
5 жыл бұрын
do you have a video how to repair scratches?
@judichristopher4604
5 жыл бұрын
This is a Fantastic Video... Great Information... Beautiful Results... ... but.. the background (noise) music was distracting, unnecessary, & annoying... We just want to hear YOU talk... Thank you for sharing this great video.
@rastagrastag9496
4 жыл бұрын
Nice job
@veitladurner1925
4 жыл бұрын
What brand of foam roller did you use? Is this an epoxy primer?
@paulbriggs3072
3 жыл бұрын
In one of their replies they say they use a fine foam Moltopren roller.
@TheTim16964
6 жыл бұрын
How come you didn't roll and tip?
@epifanesn.a.1895
6 жыл бұрын
We discovered that our Epifanes Poly-urethane has such a good self-leveling characteristic, that we can achieve mirror-like finishes with rolling alone. Check out our Instagram page for some great examples - in particular the '57 Chevy panel delivery truck. That was rolled-only, too. (We also use a fine foam "Moltopren" roller, which also plays an important part.)
@lifeguard434343
4 жыл бұрын
Where do you get the rollers that don’t fall apart
@paulbriggs3072
3 жыл бұрын
They say they use a fine foam Moltopren roller.
@DavidBrockes
2 жыл бұрын
From the 'Rollers That Don't Fall Apart Shop' 😜😜😜
@davidjessee7701
6 жыл бұрын
Why couldn't I use this in a hydrostream Viking speedboat?
@epifanesn.a.1895
6 жыл бұрын
Hi David...no reason why not. One of the benefits of rolling (no tipping required) is that you wind up with measurably more mil per coat. In other words, more paint gets onto the surface, which enhances the paint job's durability. Let us know if you paint the Viking.
@robinwallberg
4 жыл бұрын
Epifanes N.A. Which color is used in the clip? 875?
@-joe90
Жыл бұрын
Doors 🎶🎶🎶
@SatryaNouvanda
4 жыл бұрын
Opening 2020 on this video
@paulbriggs3072
3 жыл бұрын
High schoolers could have done a better job at making this video. Plus I see that you don't bother to answer anybody's questions here in the comments. Maybe high schoolers would be a better choice than you people to do both.
@PaleDoesStuff
Жыл бұрын
people are busy my guy? go get a life 😂
@cb550bike
3 жыл бұрын
there is no way that is really epafanes paint they are using in that video i just tried epifanes paint on my boat and ill never use it again it wont cover it runs the only way its usable is if u do layers so thin that u can see through them and do at least four coats of primer and four coat of paint i would never recomend this product to anyone
@GeofVasquez
5 жыл бұрын
I wish they would change the radio station.
@jayhackleman5553
4 жыл бұрын
Thanks for the info.....but no way could I work with all that crappy music in the background
@guitariste47
3 жыл бұрын
@@hairband80s69 I like the music and it could be much worse lol
@mjremy2605
3 жыл бұрын
If I buy your paints, I don't want to be locked into having to buy your high priced mystery cleaner/ solvent as well. I would like the choice of buying a generic cleaner such as Mineral spirits, Acetone, Xylene, etc. Hiding the chemicals in your proprietary cleaner only makes me mad as hell. This is a form of extortion that will steer me right away from all your products. Its a pity because your products are excellent. But I will NOT BE HELD HOSTAGE TO A GODDAMN SOLVENT!
Пікірлер: 66