@CIA LOL I love when that happens hahahahah. So good when you come across an old cringey comment 😂😂
@whizcraftworkshop5855
8 жыл бұрын
This is some serious teamwork.These are guys are pros and have spent a lot of time spent working together and it shows. Very impressive.
@Mishn0
7 жыл бұрын
I like the way the driver repacks his own 'chute. Just like skydiving, it's your ass on the line so you pack your own 'chute!
@IntegraDIY
7 жыл бұрын
I read the title and it said "funny", so as I was watching I was laughing because it looked funny, and I was waiting for the funny part too, until I realized it a funny car lol wtf 0_o
@HighAway
7 жыл бұрын
and capps isn't a verb nor misspelled.
@Muddicker
8 жыл бұрын
I could strip one of those, probably take a week. Couldn't guarantee all the nuts and bolts would be there to put back but I'd give it a go.
@Jamesr222
8 жыл бұрын
Neil Petersen lol
@groomlake51
6 жыл бұрын
Neil Petersen they are engineered to be worked on!! Any one can be taught how to do it! You would be surprised at how little knowledge crew members have on cars
@TeifiValley123
5 жыл бұрын
Very impressive how these people work as a team. You can tell they've been working together a while and know their stuff because in 10 minutes of pretty frantic work they barely utter a word to each other.
@fordnut4914
7 жыл бұрын
these guys work together like a well oiled machine.
@doc.voltold4232
7 жыл бұрын
this looks more fun than driving the monster itself
@adamforman9264
4 жыл бұрын
Bottom end just gets step on an kick thanks man
@Samsgarden
4 жыл бұрын
What a pleasant Sunday lunch. Pneumatic tools complimenting your oysters
@blackbirdxx928
3 жыл бұрын
Ya. We is drag race mechanics and we rebuild the same motor a couple times a day...except for good days..we might get to do it 3 maybe 4 times...its really really easy after you do it a few hundred times..lol...plenty talented crew, tearing one down that fast....getting it back together just as fast with no mistakes takes almost god like level of skills
@wilsonbettis9461
4 жыл бұрын
well oiled machine.... respect!!!
@BeachBoysRemembered
7 жыл бұрын
All this for 1000 feet and 4 seconds on the race track ...
@wethenation965
6 жыл бұрын
Yes because if they were to go 2 drags without cleaning and rebuilding with 10k hp youd blow up
@blazingtonight1
10 жыл бұрын
I feel guilty looking at the clutch
@HighAway
7 жыл бұрын
the most abused component of the Top Fuel.
@Seveneleven44
6 жыл бұрын
Damn those rods are massive.
@EricH928
6 жыл бұрын
Clutch hits the workbench in two minutes. Ah-maze-ing!
@creekersquad2374
5 жыл бұрын
The clutch plates actually generate plenty enough heat that bout 90% of the times the plates weld together
@groomlake51
6 жыл бұрын
Then boys are pretty good at what they do! Prob one of the best crews out there if not the best
@dr.thunder2632
4 жыл бұрын
probably some serious torque
@VRacing
9 жыл бұрын
In about a week I will upload the second part the rebuild. Sorry I have not put it up as when I was there batt died.
@fuckjewtube69
9 жыл бұрын
+Vance Romance whos batt
@sp769
4 жыл бұрын
Probably Mike Batt, lead singer of the Wombles
@stevennewman3125
7 жыл бұрын
From the time they dump tha laundry on a pass,get it back on race-jacks,tear down,rebuild,re-tune,pack chutes,bust off & warm up,get dressed & back to lanes.....75 mins...!!! Drop ur ride off at a shop on Mon morn for an overhaul & start markin days on calender till they call for pick up. Ha!
@turbonova06
8 жыл бұрын
why do they keep moving that long tube around on the different head studs at different times while they are working on short block?
@VRacing
8 жыл бұрын
It's to hold the sleeves in as they pull out the Pistons. I believe. The sleeves can be changed. I think one does get changed out.
@turbonova06
8 жыл бұрын
+Vance Romance ok ok makes sense
@riverbanks943
4 жыл бұрын
Man I would love to do that for a living
@derekhansen6652
3 жыл бұрын
The real "Napa know how"
@davdski5935
8 жыл бұрын
Are these things a dry sump and if yes (or no), do they change out the oil after every pass?
@VRacing
8 жыл бұрын
the pan is full of oil. They add new oil after the rebuild. the big round can on the back of the car is to catch any oil that gets blown out of the engine if a piston fails. Sort of like a big pcv system.
@davdski5935
8 жыл бұрын
Vance Romance cheers mate
@slowpoke96Z28
11 ай бұрын
Yes and yes.
@phatone911
8 жыл бұрын
Them boys got it DOWN son. Damn. I never have seen this side of it for some reason (although I will from now on)
@VRacing
8 жыл бұрын
ya and what's cool you get to see this all on a general admission pass.
@phatone911
8 жыл бұрын
Really!? Very cool. I really need to go to a major event. Went a few times (like 8yrs old) to the local track and at the time....blew my mind. Being in engineering as an adult...i cant imagine the mind blowage it would be. Thanks for the heads up.
@phatone911
8 жыл бұрын
Really!? Very cool. I really need to go to a major event. Went a few times (like 8yrs old) to the local track and at the time....blew my mind. Being in engineering as an adult...i cant imagine the mind blowage it would be. Thanks for the heads up.
@phatone911
8 жыл бұрын
Really!? Very cool. I really need to go to a major event. Went a few times (like 8yrs old) to the local track and at the time....blew my mind. Being in engineering as an adult...i cant imagine the mind blowage it would be. Thanks for the heads up.
@phatone911
8 жыл бұрын
Really!? Very cool. I really need to go to a major event. Went a few times (like 8yrs old) to the local track and at the time....blew my mind. Being in engineering as an adult...i cant imagine the mind blowage it would be. Thanks for the heads up.
@petroldevo9934
6 жыл бұрын
The pressure must be intense with everyone watching, the crowd noise and your particular job at hand which has to be done right every time. Wow...
@robc3056
6 жыл бұрын
ha the pressure plate is still smoking hot !!
@mjt-ew8rs
4 жыл бұрын
i think i would say this is a 'service', not a rebuild. chassis looks fine
@TuffBurnOutTeam
8 жыл бұрын
great. team work. boy's ?
@bobobrazil1973
8 жыл бұрын
Good grief look how thick them piston rods are lol.
@-hazza-1291
7 жыл бұрын
Those con rods are beefy as fuck
@ardenpeters2952
2 жыл бұрын
Symphonic!
@larrymoorejr105
6 жыл бұрын
Y'all hear them monsters firing up in the background
@exit9mastertec7
6 жыл бұрын
I wanna be part of the crew
@GonkDroid0923
3 жыл бұрын
I have a diecast model of the same car.
@danrather4649
8 жыл бұрын
sir in Kent baby
@yymmyyyymmyy2630
7 жыл бұрын
Did you find something? No. So why torn down? Because of paranoia.
@eliwooley
7 жыл бұрын
Igor Siniak because these engines make about 10,000 horsepower and if you don't rebuild them after every race , the engine will most likely blow up
@yymmyyyymmyy2630
7 жыл бұрын
I know, just wondering where they put all used parts?
@flangel842005
7 жыл бұрын
Igor Siniak most of them are either refurbedished or discarded
@fredrickmace6159
7 жыл бұрын
I always replace every race
@gamer2350
6 жыл бұрын
Eli Wooley the engine is already blown up by the end of each pass, the motors start to miss fire at the end of the run the motor is pretty much blown up at the end bc of the power and nitro methane
@memadmax69
7 жыл бұрын
And it takes me a month just to do a proper head job ^.^
@specialized29er86
8 жыл бұрын
Where's the funny part?
@blablablaseila2680
7 жыл бұрын
Não pode soprar poeira perto de montagem de motor,kkkkkkk
@racecardriver45
8 жыл бұрын
i really think its a gross waste of money. Why cant they run or be made to run a engine that will do a meeting ?
@Mishn0
7 жыл бұрын
Because they'd always lose against the guys that do rebuild after every run? There are indeed classes of racing where they don't need to rebuild but they are much slower.
@kartikeysinha3834
6 жыл бұрын
Rims are so tiny
@Bellezza1
7 жыл бұрын
Check out this drag car crash: kzitem.info/news/bejne/xWin3WWjjJqgoag
@luca-ci3re
6 жыл бұрын
What is funny on that?
@johns3655
6 жыл бұрын
Not funny at all😂 just kidding
@puhigeoffreywaynefuimaonok8656
8 жыл бұрын
mate ......
@VRacing
8 жыл бұрын
Yes?
@puhigeoffreywaynefuimaonok8656
8 жыл бұрын
cool never seen that before....... such skill
@briannotafan3368
5 жыл бұрын
it took me and my budies 30 min to take out a sb chevy drive line from a new car we stole from a deaiers lot after they fucked me on my warrenty on my new car got tires too dumped it in nigara river from my friends flat bed tow truck thats how we stole it nobody questions a newcar on a flatbed 1979 iroc thanks mernan chevrolet in buffalo ny for the new waranty engine you still owe me labor i even made sure i got the same color for parts a collision shop gave ma good buck for body parts
@LandonHendricksonVlogs
3 жыл бұрын
That was not very funny.
@christopheralderson7460
7 жыл бұрын
pay me $50hr then ill work that fast
@jamesmason4323
8 жыл бұрын
Whenever anyone askes what a Trump presidency would be like, tell em to watch this. This is what Trumps management team would be like when His Highness decides on a new 1-200m project. All cylinders to get it done. When you have honour you do everything like its the army. Just to see mom smile :-)
@rustycowll5735
3 жыл бұрын
this comment has sure aged well
@lylesommers5018
2 ай бұрын
Aw shit man, I could do that myself, might take me three weeks but still. Lol
Пікірлер: 85