It would be really helpful if you could provide links to all the parts in the description of the video
@craftlabo.tanaka3259
4 күн бұрын
I will do it❗️
@diyhometheaterguy
13 күн бұрын
Where did you get the kit for mounting the motor and the plastic gears?
@craftlabo.tanaka3259
13 күн бұрын
It's TAMIYA kit.I got it from AMAZON.
@diyhometheaterguy
13 күн бұрын
Excellent!! Thank you!
@HernanieLegaste
Ай бұрын
Where i can buy that little machine?
@craftlabo.tanaka3259
29 күн бұрын
Thank you for interest❗ This is a homemade creation, so unfortunately, it's not for sale😓 If you search for 'rope walk,' you might find commercially available products.
@OwnerPlt
6 ай бұрын
👍
@craftlabo.tanaka3259
6 ай бұрын
thank you❗️
@laurenblakley8069
2 ай бұрын
Can you share your pattern, the parts you used and where you obtained them?
@craftlabo.tanaka3259
2 ай бұрын
thank you for watching😊 There are no drawings. Since there are many parts, it's difficult to explain everything at once,sorry. Please request any information you need. Almost everything was purchased from Amazon or モノタロウ.
@laurenblakley8069
2 ай бұрын
@craftlabo.tanaka3259 OK, What are the size and tooth ratios for the gears?
@craftlabo.tanaka3259
2 ай бұрын
big gear(base circle diameter φ35);number of teeth 70, module0.5 small gear(base circle diameter φ7.5);number of teeth 15, module0.5 OK?
@michaelmercado2828
2 ай бұрын
HI this is s great video clip. I'm about to connect the Flange Coupling Connector, to the brass plate . Can you tell me the diameter of the Flange Coupling Connector, that you used....p.s. Is the diameter of the brass plate 50mm and the 1mm thick . Thank you very much .
@craftlabo.tanaka3259
Ай бұрын
thank you for watching😀 The diameter of the flange coupling connector is 22mm.I hope your work goes well👍
@tomt9543
Ай бұрын
SWEET!!
@g-kip
6 ай бұрын
Thank you, Great bit of kit, saves a fortune on ropes, I need to make one
@craftlabo.tanaka3259
6 ай бұрын
thank you for watching❗️ I'm trying to make anchor cable 😊
@4iekurs26
6 ай бұрын
Thanks for the video ;)
@craftlabo.tanaka3259
6 ай бұрын
thank you❗️
@JayJSMN-tz1nv
6 ай бұрын
Well done👍👍
@craftlabo.tanaka3259
6 ай бұрын
thank you😀
@FranciscoGarcia-ce3ub
6 ай бұрын
Muy ingenioso 👏👍
@craftlabo.tanaka3259
6 ай бұрын
thank you❗️
@adam3925
3 ай бұрын
Awesome job you did I'm trying to make one but I can't find the brass gears can you tell me were to buy them
@craftlabo.tanaka3259
3 ай бұрын
thank you for watching😀 I bought brass gears from japanese web site "モノタロウ"
@adam3925
3 ай бұрын
@@craftlabo.tanaka3259 thanks you
@adam3925
2 ай бұрын
Hi , Ones again sorry to bother you can you tell what is the diameter of the acrylic sheets and the thickness thanks
@craftlabo.tanaka3259
2 ай бұрын
acrylic sheets size is 110×70×5. try it😀
@adam3925
2 ай бұрын
@@craftlabo.tanaka3259 thanks you 🙂
@ekosulasono8777
4 ай бұрын
Awesome
@craftlabo.tanaka3259
4 ай бұрын
thank you🙂
@ekosulasono8777
4 ай бұрын
@@craftlabo.tanaka3259 can you make it for me, then send it?
Пікірлер: 33