I appreciate all the information you're giving please don't stop doing this. I'm learning a lot as I am also working on my RX-8.
@bumpstart
5 ай бұрын
points that should be covered - the effect of the same TQ setting on a different thread ( M10 x 1.0 V 1/2 unf 20 ) / countersinking the block thread and shouldering the stud thread into the block and thus its effect on axial rigidity / making the dowty seal ( the bonded washer ) or the O ring land on the stud shank and not the thread/ the use of the ARP thick washer .. to allow a concave on underside for the O ring guys . and to allow for thermal expansion when the block is hot
@petergracemeguide1280
5 ай бұрын
Please discuss Dowling. In the past I used Dowling tubes on all bolts to take the pressure loads off the bolts , I would do this on 14-21 psi or pp s but the space race has moved on as has new parts now available
@scottysfab128
5 ай бұрын
Excellent info as usual. Would be great to see your take on finding tdc top dead center. Bunch of misinformation floating around.
@pilotohernandez1569
5 ай бұрын
Interesting for my 6 port Turbo
@jvest6515
5 ай бұрын
Just got my stud kits in last week.
@everzamora9031
5 ай бұрын
93 rx7 bolt looks beefy!
@alexkathriner8671
4 ай бұрын
you mention boost limit on rx8 engines is 7 pounds, trying to understand what fails, have you mentioned this before and if so please point me in the right direction
@colectivo_drift
5 ай бұрын
Hey Kyle, I had a semi p 13b rew with rx8 rotors built by chip a bit ago. Nelson told me you had something similar a long time ago. My question is what coolant temperatures should I be running the car at? What is normal operating temperature, and is 205°f the max? Thanks!
@colectivo_drift
4 ай бұрын
I should also add, I’m running a dual pass radiator with dual spal fans, meziere 55gpm water pump and the engine is turbocharged on e85
@mekilljoydammit
5 ай бұрын
Other than machining, any real downside to oversized studs for a high revving NA motor? I know there's lots of examples of stuff that worked without but having a bit more reliable lifespan is nice.
Пікірлер: 11