Hey Joe! Another great video! Retired with 48 years of machining 2 years ago. The whole time I wished I had paid more attention in high school. I made decent grades but didn't retain much. Like someone else said in the replies," you explain things where it's easy to wrap your head around it". Great job! Congrats on your children too! J. Lezak Chappell Hill, TX
@brucewebb8749
5 жыл бұрын
I'm a 43 year man and came up under a trio of old German Machinist if you had a German accent your explanations would be the same as my mentors. I'm mentoring a young man now and have been setting him down at the computer with your videos to help him learn the trade. Thanks Joe please keep up the good work
@joepie221
5 жыл бұрын
Thanks for that. I'm flattered. One of my mentors was an older German guy. Goerge Metz. he really had knowledge and patience.
@slausonm
5 жыл бұрын
I use to be a test writer for PLTW. Your geometry example is almost identical to one of the test questions I wrote years ago. I enjoy your videos and your hands on treatment of mathematics. Thank you.
@andybelcher1767
5 жыл бұрын
Crikey Joe, I am 58 with a degree and I have learned more in the last 13.283333333333333333 minutes than in any comparable time in my life. Thank you very much. I am looking forward to the next instalment.
@tomblack9202
5 жыл бұрын
Your kids get 80% of the credit for their achievements, but you, Joe, get the rest of the credit for raising great kids! Bravo Zulu.
@joepie221
5 жыл бұрын
We just pointed them in the right direction and motivated them. It was their hard work that got the results. Thanks. We are proud.
@tomblack9202
5 жыл бұрын
BTW, when do we get to see Roger and Lola again?
@tomblack9202
5 жыл бұрын
Should be Ruger
@cosimomarotta9552
5 жыл бұрын
That's Joe. He takes boring and difficult concepts and put on the table easy and straight. Waiting for sequel.
@TAWPTool
5 жыл бұрын
Congratulations to Joe and Captain Victoria Pieczynski! I know you two just made your Dad the proudest Dad in Austin, or Texas or KZitem! Huge accomplishments and obviously the result of a lot of hard work. We wish you both all the best.
@joepie221
5 жыл бұрын
Thanks for the comment Guy. Always good when you check in.
@mtslyh
5 жыл бұрын
Congrats to Joseph and Victoria! Love the rotary table videos. Keep up the great work.
@ryanjameson2036
5 жыл бұрын
For the record sierra nevada brewing is in, well the Sierra Nevads. Chico California, near where the camp fire was. This has no bearing on the video, great as always.
@richardboucher6904
5 жыл бұрын
Great memories Joe. Thanks! When I started to run CNC mills we did the programming with a drawing , a pad of paper, a calculator, a trig table book and chart of the "G" and "M" codes typing the instructions out on a Flexwriter on paper tape. Did the program in incremental and programmed tool line rather than part line per the instructions of the co-worker who was training us. Later we figured how to use cutter compensation for part line and absolute on our own. We sure did a lot of Trig in those days. Today in my home hobby shop I draw the part in CAD pass the drawing through a program that figures the "G" code and run the machine. As the young folks say "Sweet"
@adaml52
5 жыл бұрын
Hi Joe, I appreciate you taking the time to make videos. Thank you. Adam, Yorkshire, UK
@incubatork
5 жыл бұрын
You explained changing x.x° into x° x' x" better than my nautical teacher did in 1979. Same calculation usable in 2 completely different work enviroments, nautical navigation and machine shop. I still have my Norries tables, never thought i could use them again after retiring from sea. This brought back memories, Thanks
@ls2005019227
5 жыл бұрын
Joe, Fantastic video! I found you as a hobby machinist; but as a Land Surveyor, I use the information you're providing on a regular basis. You have a lot to be proud of; it's obvious that the apples haven't fallen far from the tree. Thanks again!
@bhein67
5 жыл бұрын
You are awesome at simply explaining the seemingly complex. And Congrats to your Kids accomplishments. The sign of great parenting!
@bostedtap8399
5 жыл бұрын
Well done to your family, a great moment, and a lovely to share. Nice trig refresher. Best regards from the UK.
@karldegroot3131
3 жыл бұрын
Wow. That's an amazing use of Pythagorean geometry. I think it was the Transverse Parallel Theorem (TPT). Every triangle possesses 180 degrees total, interiorly. Great job, Pie. Congrats on your kids' accomplishments. Always learning from you!
@jimsvideos7201
5 жыл бұрын
Both of your children deserve credit for their accomplishments!
@TheMikey1865
5 жыл бұрын
Joe, thanks for the shout out to all of those suffering from our recent fires in CA. Great info on the math. When I teach I stress the math in machining. My best advice to a young machinist apprentice is to buy the machinery handbook, learn how to use it. Because you don’t need to remember the formulas but knowing how to apply them with the info you have on the print is the next best thing.
@beehivepud
5 жыл бұрын
Excellent, it's all in the triangles as you say. Thanks for the refresher. By the way, I had to go back to your setting up of the fly cutter to an exact radius and it worked a treat as usual. Thanks Joe
@charlieromeo7663
5 жыл бұрын
Nice job Joe. I’m sure this lesson is helpful to people new to machining, and a great refresher to the CAD folks that never twirled a compass. I will look for that beer at my local adult beverage store. Thanks.
@PurityVendetta
Жыл бұрын
First of all, better late than never, congratulations to your son and daughter on their achievements. I just want to say how grateful I am for your time and effort posting these incredible videos. I had a bit of a shaky start in life as I went to school in the 60' and 70's here in the UK and, later, at university as a mature student found I was an undiagnosed dyslexic. This had reeked havoc with my schooling. Anyway, I don't want anyone feeling sorry for me but I've worked really hard to catch up and come back from it. Also, given the time and the area I went to school in girls like me were only expected to marry and have kids. All the boys in my family are engineers or do technical jobs (my brother of whom I'm very proud, but don't tell him, is a chartered engineer). I was always interested in engineering and mechanical things and finding out how they work. I set up my little shop doing one off jobs for people with vintage British motorcycles and have taught myself with the help of books and videos like yours to do more and more jobs. Anyways, I just wanted to say a huge thank you and to say, if there's an operation or a job I'm struggling with or need help I've always come to your channel first and you've never let me down 🙂
@joepie221
Жыл бұрын
Thanks for the comment and I'm happy to help.
@PurityVendetta
Жыл бұрын
@@joepie221 To add a little context, I'm currently on a job for a lovely guy who's terminally ill and a couple of us are trying to finish his dream bike before time catches up with him.
@shadowdog500
5 жыл бұрын
Congrats on your kids! My radio shack scientific calculator from the ‘80s had a button to convert between decimal degrees and ° ‘ “ . Wish my iPhone calculator had that button. It would save a little time. Chris
@drumlover1687
5 жыл бұрын
I've always loved rotary table work Joe. And I applaud you for teaching this information on your channel Joe! Learning geometric theorems and axioms when I was a kid serving my apprenticeship was eye opening for me. Sadly this is lost to alot of young machinists in todays autocad and cnc world.
@jimmymymtv2254
5 жыл бұрын
good stuff Joe. reminds me of myself pulling my hair out in blueprint class. A great refresher. keep it up
@ChrisB257
5 жыл бұрын
One proud dad with those kid's doing so well - terrific Joe, congrats to them. Thanks for the extra very useful geometry lesson - lost count of how many times I forget some of this stuff. Of course when you go thru with your inimitable logic and clear demos - it again seems so easy! Thanks Joe. My beat up old rotary table could never reach accuracy once we get into mins and secs!
@marvincallaway1325
5 жыл бұрын
Thanks Joe for all of your videos and presentations and congratulations to you and your family. As for some of the negative comments I learned several years ago when I started a business of my own I wanted to try and please every customer that came through the door. It only took me a few days to realize that's impossible. 99.9% of us appreciate what your doing.
@joepie221
5 жыл бұрын
I'm only human and some of the comments do annoy me, but I do my best to brush it off.
@vdubjunkie
5 жыл бұрын
As always, your information is next level. Thank you so much for taking the time. If only my geometry teachers had thought to take the class to a machine shop, I would have learned so much more easily!
@Redmech80
5 жыл бұрын
All gold. Greatly appreciated!!! Wish I could give it more thumbs up.
@ianmorcott3113
5 жыл бұрын
Geometry and trig refresher in one easy lesson. Very well done. Thanks!
@williammills5111
5 жыл бұрын
Joe- Thanks- as always, useful information presented in a clear and understandable fashion. Keep 'em coming! Best regards Bill
@axelzanelli6475
5 жыл бұрын
Thanks for another fine video! Congratulations to your son and daughter, Great Job Dad!
@johnfry9010
5 жыл бұрын
Sierra Nevada brewing is located in Chico , CA , and is not very far from those fires .
@andrewstoll4548
5 жыл бұрын
Congrats to your kids. Awesome work by your daughter becoming a Capt.
@patlaird4188
5 жыл бұрын
Joe, great as always. watched this several times. This is a video they should show in trig classes. Or anyone for that matter.
@radardoug
5 жыл бұрын
Hey Joe. I've been a flight test engineer for 40 years and I spend a lot of time doing mission planning and converting latitudes and longitudes back and forth between decimal degrees and DMS. I've found that pilots prefer DMS and engineers prefer decimal degrees (or even worse, radians) but sooner or later the two groups have to exchange information so I spend a lot of time doing what you just did. Wouldn't life be simpler if everybody just used the same units! Good job on the explanations.
@joepie221
5 жыл бұрын
Funny story. A novice pilot got blown off course and couldn't find the airport. She called the tower for help telling them she was lost. The ATC asked her, her current position. The pilot replied, 46 degrees, 54 feet 27 inches based on the GPS readout on her instrument. The ATC replied " You sure are !
@horacerumpole6912
5 жыл бұрын
Let's not leave out mils-
@rdick218
5 жыл бұрын
Awsome! I look forward to each new video! Thanks!
@MyHeap
5 жыл бұрын
Great demionstration. Love your presentation style Joe. Joe
@hanni43
5 жыл бұрын
Thanks for taking the time & making things come together where we can understand it,
@johanvanrensburg9433
5 жыл бұрын
Congratulations on the achievements of your off-spring, and thank you for the vid.
@royreynolds108
5 жыл бұрын
The comparison of 60 minutes in a degree to 60 minutes in an hour and 60 seconds in a minute is a slick one.. As a civil engineer sometimes it is useful to use angles in decimals of degrees and convert to degrees, minutes and seconds at the end.
@horseshoe_nc
5 жыл бұрын
Congratulations to both of your children! Thanks for the great insight into radius tangents. That information can come in handy programming an arc on a CNC as well.
@joepie221
5 жыл бұрын
Finding those I's and J's can be tricky if you don't understand stuff like this.
@horseshoe_nc
5 жыл бұрын
@@joepie221, I ran into that a time or two, in the past. Luckily, I was programming Hurco conversational. Put in what I knew, angle of previous segment, radius of arc, angle and endpoint of the segment after the arc. Once I got that info entered, the control figured out the rest.
@RagsdaleCreek
5 жыл бұрын
Very informative video. Congrats to your children. I see one proud Daddy
@34k5
5 жыл бұрын
Well done, made perfect sense to me .. thank you for continuing with these videos. Edit: Congrats to your son & daughter!
@PaulSteMarie
5 жыл бұрын
You throwing away .2 arc seconds gave me a good chuckle. Radio astronomers using VLBI will form images of objects spanning milliarcseconds.
@Tools4Machines
5 жыл бұрын
Super achieving kids? Who would'a guessed? Congratulations on their achievements, Joe. I know your are super proud of them. Cheers, Gary
@joepie221
5 жыл бұрын
I am Gary, Thanks.
@rootpass74
5 жыл бұрын
Thank you Joe for your videos!
@mlybudo
5 жыл бұрын
Joe thanks again for a great vid. I will hitting this part of geometry in my college machine shope mathmatics course I teach. I will play this for them in class. Even though I require a calculator as a mandatory tool the Casio 260-x they all have to learn and demonstrate they can do the math without the magic converstion button on the calculator. Looking forward to the next section.
@jamessherrill3454
4 жыл бұрын
Love your daughter for her accomplishment! Two of my daughters joined the national guard and served in Iraq, Egypt and Kuwait. I know your pride! Love your videos.
@joepie221
4 жыл бұрын
Thank you. I am very proud of all 3 of my children. Thanks to your daughters as well, for their service. Happy Holidays.
@welcometothemachineshop466
5 жыл бұрын
Congratulations on both your kids accomplishments! Great explanation on the breakdown of the geometry.
@joepie221
5 жыл бұрын
Thanks.
@larryschweitzer4904
5 жыл бұрын
Thanks for the review. Math minor in college, 100 years ago +-. Trig is the most useful everyday math. All those calculus courses I took haven't been of much use. I suspect the thumbs downs are from people that can't add &/or subtract. 9,152 views in 3 days says a lot.
@blakewerner4368
5 жыл бұрын
thank you sir, i have always struggled with that sort of thing and you just made it easier for me to understand for the 1st time! now if i can just remember it
@brianevans1946
5 жыл бұрын
Great video and congrats on your children's achievements..
@ralphf8951
5 жыл бұрын
Thanks Joe, this was very helpful.
@bruceanderson9461
5 жыл бұрын
Happy for mom and dad and the kids! It so nice to have some millennials make it through all of the dead end traps our society has put in their way. Having taught preclinical dental classes, I appreciate your teaching style-understand the basics first, then demonstrate. Anyone who Ieaves a thumbs down is to be forgotten.
@stxrynn
5 жыл бұрын
Exactly how I learned in school. Do they not do this anymore? It's a very welcome refresher for me. Thanks man!
@tomherd4179
5 жыл бұрын
Kids made you a grateful dad & you (and Misses) helped make them what they are and achieved. Wow!!
@joepie221
5 жыл бұрын
We are proud of all 3, but they did the leg work. we just put them there to do it.
@MikeFnt
5 жыл бұрын
I love all of your videos!
@quinka2
5 жыл бұрын
thanks very much for the schooling Joe
@jrucker2004
5 жыл бұрын
Thanks for the shout out, man! I really appreciate it, and I appreciate everything you do on this channel. I seem to learn something new just about every time I watch. Keep up the great work!
@joepie221
5 жыл бұрын
Hey Jason. Thanks for stopping by. Jackie and Travis put me up to this. if you ever have any specific machining issues get in your way, feel free to post a question. I usually reply. best of luck with your shop.
@jrucker2004
5 жыл бұрын
@@joepie221 will do, much appreciated!
@bluesman7191
3 жыл бұрын
Great stuff Joe. I can see many applications to what you taught. I recently purchased a rotary table like yours and will put your lessons to work. Thankyou so much.
@mariusvandervyver9278
5 жыл бұрын
Joe, we went decimal in the 1960’s in South Africa, but still use DMS in most cases. Looking at other comments, it is fine to just use built in conversion functions on calculators or to use CAD to get the info, but surely it is good to know what the calculator or CAD program is doing and not just rely on the easy way out. Good job you’re doing
@joandar1
5 жыл бұрын
Very good explanation Joe, I particularly liked the use of the Pie Chart at 5:40 or so. How appropriate for you to use that for your explanation of a percentage of a degree! lol. Keep the tutorials coming as I always pick up a new idea from you sharing knowledge. Cheers from John, Australia.
@camillosteuss
3 жыл бұрын
In this case, I believe that a Pie chart may as well be called a Joe chart, as Joe is Pie, and little wonder he is so good at geometry, when he is the key number in calculating most of things in geometry... 3.14, a Pi...e...
@smalcstein
5 жыл бұрын
If I had teachers like you in high school, I would be making fusion reactors now :-)
@joepie221
5 жыл бұрын
Thank you.
@donnyo65
5 жыл бұрын
I love geometry - no really! New to the rotary table and this information is fab, thanks.
@joepie221
5 жыл бұрын
I was a geometry wizard in high school. Loved it.
@fredechevarria3798
5 жыл бұрын
Joe,you are my best mentor on UTube!!!! I am probably one of your older subscribers 70yrs. I will share with you my main background is medical ,ie a clinical psychologist so for me I OVER THINK EVERYTHING.Joe to that end Appreciate your dumbing itdown for this ole fart to get it!!Joe this is my first attempt to ask a question on your channel so here’s gos.My question is re your fly cutter info.I work mostly grade5 titanium.I have always sought out the best option for a fly cutter especially considering my mill is low power 2hp. So positive inserts have been my first choice.I recently saw a clip on a unique design made by Suberban Tool.This design is very beefy,but the tool holder is about flat to the bottom of its holder or parallel to its bottom unlike any other fly cutter I have seen which the tool holder projects at an angle,much your example. I can see several advantages with this design,and the video clip from Suberban. Looks truly inspiring !OK so in your vast experience is this a more hype than anything.The price of this tooling is quite expensive, around $350 plus the necessary adapter for your particular mill,in my case R-8.Again great job with your teaching,so before I invest in half my SS check I would love your feedback.I think you will agree,the design is quite unique,at least according to “FRED”.Thanks again Fred
@joepie221
5 жыл бұрын
If we are talking about the same set, the insert holder arms give the clearance needed. Mine and many others are more of the conventional design for HSS tool bits. If you don't mind grinding your own tools, and don't require insert repeatability, I personally would just make one and save the money.
Hey Joe,thanks so much for taking the time to reply,I am really flattered.Joe,that said I am sorry I could not offer a model number to accurately identify the Suberban fly cutter I was referring to.I would understand that no one could really comment on an unknown object.Thanks again,I do believe you are one of the few that. Could quite your day job and go into teaching LOL.I must say again I have learned many things I have taken for granted or just was not aware.Have a great day and continue to enhance all your followers lives in such a positive way.Fred
@joepie221
5 жыл бұрын
@@fredechevarria3798 Thanks Fred. That means a lot.
@James-fs4rn
5 жыл бұрын
Sounds like you're a great parent and machinist. Congrats to all! Thanks.
@joepie221
5 жыл бұрын
Thank you. Anyone thats done it knows being a parent isn't always easy. I'm blessed.
@dougberrett8094
5 жыл бұрын
Joe, Congrats to your kids. Nice presentation on decimal degrees. I worked as a prototype machinist for some time. Always preferred decimal degrees. Too bad rotary tables etc. are stuck on the degrees minutes and seconds [DMS]routine. Somewhat like fractional drill bit sizes rather than decimal sizes. Huge pain in the brain. For those times when one must convert a decimal angle to DMS use a Hewlett-Packard HP-41 or emulator of said on your smartphone. Does the conversion with a built in function. You get to think in decimal and work in DMS this way.
@wint3rsmith42
5 жыл бұрын
another great lesson. Thanks. Congrats to your kids. do you use some kind of precision engineering calculations when getting a hair cut too??
@jackiep1e
5 жыл бұрын
Nice shirt. One of your awesome kids must've given that to you. :) Love you, Dad. xoxo
@joepie221
5 жыл бұрын
Hi Punkin. I love you too. Thanks for checking in.
@edwardswinesburg877
3 жыл бұрын
As a hobbyist, I went to trade school taking machine shop and tool and die making. I enjoy your instructional courses and have learned much from you and other tool and die makers on You Tube.
@peeeoii2738
3 ай бұрын
What do you do for work? I work at a shop (production) and don’t really like it but I lovvvvee the trade looking to switch careers for something that actually pays money
@marvincarvin1846
5 жыл бұрын
All of this time, I did not realize you were saying This is Joe "Pi". Now I get it! :) Euclid would be proud of you!
@krazziee2000
5 жыл бұрын
cool lesson, thanks
@danstephens1260
3 жыл бұрын
Excellent
@beachboardfan9544
5 жыл бұрын
Damn good time to be a Pie! Congrats!
@shannonstebbens6992
5 жыл бұрын
OK Joe. You have convinced me. I should have paid attention in Geometry Class. Unfortunately that was not the case.
@horacerumpole6912
5 жыл бұрын
A straight line that becomes an arc is a loxodrome. A tangent merely touches the arc.
@flyingmonkey3822
9 ай бұрын
Congrats to your kids! Thanks for the tips
@joepie221
9 ай бұрын
Thank you. I'm very proud of my kids.
@Sodabowski
5 жыл бұрын
Hey, congrats to your kids!!
@karlvella7627
5 жыл бұрын
hey joe thanks for this precious info you gave to all of us... it was really use full... congrats to your children for their achievments... joe that rotary table does it take indexing plates to cut gears? if Yes can you do a video of how you cut gears and calculation...... I know that this is a vast topic on gears.. thanks karl from Malta
@toolbox-gua
5 жыл бұрын
I’m spanish speaking and thre is a saying that goes: “De tal palo, tal astilla” which is “Like father, like son/daughter”. Congrats to all of you.
@angelramos-2005
Жыл бұрын
Great video.Thank you.
@joepie221
Жыл бұрын
Glad you liked it!
@outsidescrewball
5 жыл бұрын
congrats to the kids...besides being a great machinist/educator, your children prove your a great parent (and we know it can take two, congrats to your wife)....enjoyed
@joepie221
5 жыл бұрын
Thanks Chuck.
@daniel_6741
5 жыл бұрын
Nice video, really nice content. Many people struggle a lot with sine and cosine, to figure out dimensions on let´s say a little odd shaped parts.
@artgoat
5 жыл бұрын
The lazy way to do it is to plug that drawing into a CAD program and have it give you the dims you're missing. I often use AutoCAD as a visual calculator like that. But it's nice to know the construction rules for when the power is out and all I have to work with is an 1800's book of trig tables.
@robertoswalt319
5 жыл бұрын
Nice video Joe. Could you do a follow up video showing the order of operations you would use to make that part. I am not asking you to physically make the part just number the steps on the board. Thanks
@TheSiriusProject
5 жыл бұрын
Good video. I have a question for you. How would you set up an arc cut with a radius longer than the table on your mill? Say you have a part that is roughly 3”x6” but one side needs an arc that has a radius of 55”.
@KevinWoodsWorkshop
4 жыл бұрын
You would have to use out riggers! I managed to do a 350mm radius on a 8 inch rotory table.
@TheSkipinatorVids
5 жыл бұрын
I still have my AE-1 Program from the 80's. Have the autowinder for it too... :-)
@kylemichael2175
5 жыл бұрын
Great video and congrats to the kids! Former USMC Combat vet here. Hell of an achievement your daughter reached making Captain! Onto the rotary table question now...How would you accurately center an arc over the COR of the rotary table? I usually mark it during layout or center punch the center of the arc when i can, and use a dead center or other accurate conical tool in the spindle to line them up. Always wondered what a more accurate method would be. Thanks Joe!
@joepie221
5 жыл бұрын
Thanks, and thank you for your service as well. I'll show the centering in upcoming videos. Got some very cool tricks.
@lilyhighfill4451
5 жыл бұрын
VERRY GOOD INFORMATION
@johnreese3943
5 жыл бұрын
Just about the right amount of detail. I didn't need a user manual to follow your presentation. It is unfortunate we are stuck with degrees, minutes, seconds. It would have been simpler to work in decimal degrees. I have considered making a new collar and vernier for my rotary graduated in decimal degrees. My Excel worksheet output is in decimal degrees and I have to convert to DMS to use the rotary. PITA. Please keep making videos. They are always great. Thanks.
@johnreese3943
5 жыл бұрын
@Donald R. Cossitt You are right. I converted radians to decimal degrees. That was easy. It took me a while to figure out how to convert the decimals to DMS.
@warrenmaker798
5 жыл бұрын
Thank god I built me a little CNC cutter. That maths was WAY to advanced for my feeble brain! :)
@paulmorrey733
5 жыл бұрын
Thanks Joe
@chrisn3794
5 жыл бұрын
Joe love your videos learned a lot from you. I used to work with the old man that used to turn large radius on lathe by turning the desired radius on spare piece of material and then placed that piece onto the lathe somewhere not sure where I’m guessing on a bar set on the ways directly below the part set up a dial indicator onto that piece and he traced the radius onto the part he was cutting. I can’t figure out how he did it maybe you may know.
@chrisn3794
5 жыл бұрын
He also used to mill radius on parts on the end of flat bars by making a sub plate clamped in the vise with a dowel pin pressed in the plate then he would put the bar with a hole the size of the dowel pin located at the center of the radius desired, offset his cutter for the radius and would physically grab the bar and pull it into the cutter cutting the radius into the end of the bar. I’m still not sure how he did it. He did say to make sure you conventional mill and to use hss.
@judywarren7154
5 жыл бұрын
Is that supposed to be a linear (non exponential) arc or is the curvature changing along the way? Sorry I didn't get it.
@joepie221
5 жыл бұрын
Simple arc.
@Eluderatnight
5 жыл бұрын
Always be on the lookout for a 3, 4, 5 triangle. They are everywhere ie (x*3), (x*4), (x*5). An 18 x24 surface plate is 30" long hyp. 6*3, 6*4, 6*5.
@MarkS6026
5 жыл бұрын
Can you also find a Tangent by placing both legs of a square in contact with the circle?
@joepie221
5 жыл бұрын
They may be more obvious, but finding it would be based on the position of the square.
@CalvinEdmonson
5 жыл бұрын
Another excellent video Joe. Cool shirt by the way.. I hope to attend a MOTOGP event there soon. Maybe I'll stop by the shop and say hello.
@joepie221
5 жыл бұрын
Its a world class facility. My oldest daughter Jackie is moving up through the ranks with her motorcycle and runs hot laps out there quite often. I go out to watch.
@jrkorman
5 жыл бұрын
x' = (0.575*tan(35)) + (1.125/cos(35)) Assuming origin is on your bottom left. Nice, haven't used my trig in a while. BTW - Congrats to the kids - I'm USAF, Ret.
@joepie221
5 жыл бұрын
My Father was a Staff Sgt. Thanks for your service.
@w53p
5 жыл бұрын
Hi Joe, I'm a newbie. I learn so much from your videos. Any chance you could show how to take these derived measurements and use them to mount the part on the rotary table to cut the arc. Cheers Bill
Пікірлер: 243