Interested in full details, looking to do this to a JD 330 baler as well. Thanks
@bignatehobbyfarm
Ай бұрын
Fairly simple. Ask any questions you got.
@trente4657
Жыл бұрын
Would be interested in more details and link to actual actuator used, may do this on a 335 baler.
@bignatehobbyfarm
Жыл бұрын
Here you go: ECO-WORTHY 12 Volt 10 Inch Stroke Linear Actuator Heavy Duty 330lbs Maximum Lift with Mounting Brackets a.co/d/d5RrUgf
@jeffjones9727
Жыл бұрын
The bale size sensor’s connected to the actuator, or the wires just run parallel in the same loom ?
@bignatehobbyfarm
Жыл бұрын
It's a mechanical bale size sensor linked to the tension arm. It's very rudimentary but reliable. No wires involved.
@jeffjones9727
Жыл бұрын
@@bignatehobbyfarm and it just runs to the buzzer right ?
@bignatehobbyfarm
Жыл бұрын
@@jeffjones9727 the buzzer is a simple switch situated on a bracket connected to the right side tension arm. I wired it to a buzzer on my little control box that I fabricated. The original design had no control box and was all just visual gauges and a buzzer built into the baler.
@chriseasley7884
Жыл бұрын
How does it feed the string I'm Interested in doin this
Пікірлер: 12