I bought one this spring, And it made me a Dado pro on the first try. I am not a regular Dado pro....... but now I am
@nextvkin202805
2 жыл бұрын
Hi Mike, how well does the dust extractor work?
@mikethompson7290
2 жыл бұрын
@@nextvkin202805 works well, I use a dust right flexible hose and it does a good job of moving debris from the Dado , i also use a dust separator and a shop vac. I am pleased with the performance.
@inatp3
Жыл бұрын
Fabulous. Excellent video and excellent presentation by the presenter!
@rockler
Жыл бұрын
💙
@HomesteadingGeek
2 жыл бұрын
This product is perfect for my wood working needs.
@freedomring3022
2 жыл бұрын
They are opening a new Rockler store not too far from me ... I am so excited :)
@billedis5482
2 жыл бұрын
I am really impressed with this jig!
@j316finewoodworking6
2 жыл бұрын
Yall killing me....I need this in my life LOL
@SteveStaves
2 жыл бұрын
They need to configure one for 1/4" dado's as I use those more often than any other size. Granted, they are easy to cut wit a table saw which is what I currently do.
@BOTzerker
2 жыл бұрын
Rockler Indexing Dado Jig $79.99 ($59.99 on sale.)
@jaa522
2 жыл бұрын
This video is excellent jig on the way. I have a Bora locking straight edge. My question is he mentioned you would have to offset the straight edge guide when using a 1/2” bit 3 1/4” away from the dado. I am assuming dado line. Is the offset different when using eith a 1/4” or 3/8” bit? Thanks.
@aaudain1
Жыл бұрын
Great idea 💡 👍 👏
@rockler
Жыл бұрын
Thanks! 🙌
@christopherdekonstrukt444
Жыл бұрын
I have the Bora 100" guide. I need to cut 3/4" t-track grooves in my workshop table I'm building. I have a Bosch MRC plunge/fixed base router.
@b3arwithm3
3 ай бұрын
Why not make the first cut in the open position since we just set it?
@rockler
3 ай бұрын
Hi @b3arwithm3, Please reach out to our product support team at 1-800-260-9663 or support@rockler.com. They'll be able to answer that for you. Thank you
@alanborack9256
2 жыл бұрын
What's worse, is Rockler recommended the Bosch 1617evsp wich I went out and purchased last night, it doesn't line up with any of the holes. If I had to hazard a guess, what they neglected to inform people is YOU, the consumer must drill holes in the acrylic base so you can install the "Perfect Jig
@rockler
2 жыл бұрын
Hi Alan, We verified with our product development team that the perfect fit dado jig is made to fit the Bosch 1617 router. If you're having issues with the product, please reach out to our product support team at 1-800-260-9663 or support@rockler.com. They'll be able to assist you. Thank you
@johnslaughter5475
Жыл бұрын
This is one time that I think Rockler has not made a jig that is simpler to use. A home made jig using 2 boards, straight of course, and a pattern bit in the router. Put one board on one side of the dado and clamp it down. Use a sample of the piece that is to be in the dado, set the width of the other board. Then route. A whole lot easier and probably less expensive than the jig.
@keithmurray9241
5 ай бұрын
Clamping it down and getting it perfectly square would be the issue with your approach. This approach uses the 'squareness' of the locking guide rail to get the straight and parallel cuts. That said, agreed.. you could achieve same results if you were careful using your approach.
@jodymontez693
2 жыл бұрын
What about a 3/4 inch groove?
@Firedrake1313
2 жыл бұрын
You would use the 1/2" bit. The way the jig works your first cut would be 1/2" wide, and then the second cut once you slide the jig to the open position will clean up the other 1/4" and boom, 3/4" dado.
@velocityacoustics
Жыл бұрын
I dont understand why you need to make two passes to make a dado? If i want to make a 1/4 wide dado why cant i just do it in one pass with a 1/4 bit?
@rockler
Жыл бұрын
You can do that for sure. Multiple passes are being recommended for when the material isn't the exact size of the bit. Which is usually the case with the stock vs the bit size, especially with plywood. Starting smaller and moving up in multiple passes with this jig ensures a perfect fit.
@carl6041
2 жыл бұрын
My issue is that I just tried it and I can not get the jig to close properly on the 3/4 ply....I have squeezed the piss out of it and the dados are alittle wobbly
@rockler
2 жыл бұрын
Hi Carl Cabaj, Please reach out to our product support team at 1-800-260-9663 or support@rockler.com. They'll be able to assist you. Thank you
@shaynesabala
Жыл бұрын
Can it be used with a trim router?
@rockler
Жыл бұрын
The jig is pre-drilled for the following mid-size routers: Bosch 1617 Dewalt DW616 Dewalt DW618 series Hitachi M12VC (not M12V) Makita 1100 series Porter-Cable 100 Porter-Cable 690 Porter-Cable 890 series Thanks!
@georgebrill3072
2 жыл бұрын
What's the widest dado that can bu cut using this jig
@keithmurray9241
5 ай бұрын
1/2" bit size was max it could use and he said the dado width had to be less than twice the width of the bit... if I understood correctly so... 1" would not be possible, but anything less than 1" (how much less I'm not exactly sure) would be possible? You might have a scrap of unremoved material you could cut out with a chisel presumably if you were trying to go for the max. Just my thoughts. Let us know if you try to find the max.
@Delta19G
2 жыл бұрын
Applause another great video
@roguepetunia
2 жыл бұрын
Will this fit a Makita compact cordless XTR01 router? thanks.
@rockler
2 жыл бұрын
Hi roguepetunia, Please reach out to our product support team at 1-800-260-9663 or support@rockler.com. They'll be able to assist you. Thank you
@saef55346
2 жыл бұрын
روعه
@frankneher9192
2 жыл бұрын
The question I have is what can we use for bars?
@rockler
2 жыл бұрын
Hi Frank Neher, Please reach out to our product support team at 1-800-260-9663 or support@rockler.com. They'll be able to assist you. Thank you
@learnwithchuck2173
2 жыл бұрын
Will this work with a Ryobi Trim Router?
@rockler
2 жыл бұрын
The Ryobi trim router will work with this jig but you will need to drill your own mounting holes in the jig to mount it. Have a great day,
@alanborack9256
2 жыл бұрын
I received the jig yesterday and found that the acrylic base does not align with my craftsman router
@rockler
2 жыл бұрын
Hi Alan Borack, Please reach out to our product support team at 1-800-260-9663 or support@rockler.com. They'll be able to assist you. Thank you
@delainesanders9437
2 жыл бұрын
Your instructions are great but that the connections don’t hold great, are a real negative.
Пікірлер: 44