Thanks for the great video. I have an SD8 chained after an S16 in my setup, primarily for additional inputs. The S16 is CH 17-32 and SD8 is CH 9-16. I've figured out the routing and I get input signals fine with dynamic mics or line inputs, but I can't seem to figure out how to turn off/on phantom power for the SD8 inputs from the x32 Mixer app. The button isn't there.
@DanaTucker1
Жыл бұрын
That sounds like you have something going on with your HA Gain Split settings. In X32 Edit go to Setup > Preamps and make sure you don't have the stage box locked or the HA Gain Split checked.
@pburner
8 ай бұрын
I came across an odd problem on my SD8 connected to my X32R via AES50. I am getting signal in all 16 buses as expected (1-8 from the X32R and 9-16 through the SD8). Yes, the SD8 is switched to the 9-16 position. HOWEVER, I am unable to get stereo pair panning working properly on the outputs of the SD8 but stereo pair panning works fine on buses 1-8. Example - I have 4 stereo pairs set up on buses 1-8 on the X32R for stereo in-ear monitors, and this works as expected with panning working fine. However, with stereo pairs set up for buses 9&10 and 11& 12 (which are outputs 1-4 on the SD8) I am not getting any panning ability. I have the default AES50-A settings just as shown in your video. Any ideals on why the panning isn't working just on things connected to the SD8???
@DanaTucker1
8 ай бұрын
It sound like you have the Panning Option checked on the Sends tab. This will keep you from receiving panned signals. If it is checked, uncheck it.
@pburner
8 ай бұрын
@@DanaTucker1 Thanks for the reply. When I went to the sends tab I found that all the IEM sends on 1-8 (via the X32R) are set to Post EQ, but the one IEM send that is giving us problems on the SD8 was set to Post Fader. The panning option was not checked. Would the Post Fader instead of Post EQ cause this problem? Looks like I may need to sign up for your paid support - HA! Thanks so much.
@pburner
7 ай бұрын
@DanaTucker1 Thanks for suggesting the Sends tab. I wanted to let you know we were able to resolve our problem but not sure the "how" or exactly why what I did worked. HA! When I looked at the sends I noticed that buses 1-8 on the X32R and also 1 and 2 on the SD8 (our buses 9 and 10) were set to Post EQ, but buses 3 and 4 (11 and 12 in our configuration) we set to Post Fader. When we changed those to Post EQ we were able to hear the stereo panning as expected. I was hoping to attach a screen shot but it appears I can't do that on these comments. Again - thanks!
@DanaTucker1
3 ай бұрын
You are very welcome. Sorry I didn’t get back sooner but I didn’t know how to get new alerts for ongoing comments.
@88omarz
Жыл бұрын
I have a sd 8 with my drums all connected to the input 1 to 8, I also have my p1 connected in out out 1 and 2, I am the drummer and want to be able to hear all the sounds through my p1,I have drum mix going through mix bus left and right. When I sends on fader and unmute the other inputs going into the drum bus. All the other musicians are unable to control their volume for other sounds or instruments at their p16s, I have outs 9 and 10 on the p16s being fed the drum mix l and r this is all pre fader. Any idea what am missing that would allow me to control all the other instruments like I can the drums, but also let me. It affect the other musicians, similar to how then p16 operate, I am hoping to use the mxq app to manage what I can control. Thanks in advance
@DanaTucker1
Жыл бұрын
If you want to send the drum bus to the P16s, then all you should have on that bus is the drums. You need to setup your own Buses for your P1, and that way whatever you feed to your mix buses, can only be heard by you.
@AndrewHeiman-p4d
Жыл бұрын
Did I understand correctly that the SD8 outputs (1-8) will mirror the X32 outputs (1-8)?
@DanaTucker1
Жыл бұрын
That depends on what position you have the switch set to on the SD8.
@playtimepiano
Жыл бұрын
Can you make the Main LR Outputs(7,8) be Output 1-2 on the SD16?
@DanaTucker1
Жыл бұрын
Absolutely. You would do this through the Out 1-16 in X32 Edit or X32 Mix.
Пікірлер: 13