Hi Anna, I am from Maharashtra. This video really gives satisfaction to see how the Heart of Bullet get assembled. Clean Parts, well explained and not in hurry. I really appreciate your efforts ❤️😊
@asefsha8378
4 жыл бұрын
Nice video and clear and easy to understand. I was expecting to see how you replace bearings in engine chamber. Anyway waiting for the next videos... Thanks.
@suryabhai1992
4 жыл бұрын
Bro very simple. Thanks Plz make a vedio regarding clutch setting of old bullet. How to adjust the clutch and how much free play is required...... What is the difference between 3,4 and5 plate clutch for old model RE... Thanks
@asefsha8378
4 жыл бұрын
Very good question . Such questions make us do more research and in the process learn a lot. Can we add five set clutch plates in 350 cc? All these days I used to think that 5set clutch plates are for 500 cc. (In old model CI)
@ECFixeljin
4 жыл бұрын
The clutch lever inside the gear box should have a play of 3 mm - 4 mm that can be adjusted by clutch lever adjuster present in the gear box or it can also be adjusted by using the adjustable lick nut in the clutch cable. In 350cc Royal Enfield comes with 3 plate assembly and for 500 cc it is four plate assembly. The conversion from 3 plates to 4 plates can be made in 350 cc by using 4 endurance friction plate and an additional plane plate. For 500 cc we have to use 5 endurance friction plate and an additional plane plate. The thickness of friction plate is lesser when compared to Royal Enfield original frictional plate, but as the number of plates is increased the performance is better when compared.
@I_infinite_living
4 жыл бұрын
I need more explanation of crank fitting like we have to place two bearings and washer and spacer etc how to do that
@vrriderspdtr
4 жыл бұрын
Make video on ac ,dc cdi wiring alternator and cid unit self repair
@ECFixeljin
4 жыл бұрын
k...
@vrriderspdtr
4 жыл бұрын
@@ECFixeljin waiting for video
@mangeshkakade2628
4 жыл бұрын
Hello Sir Really Thanks for these videos , Can you make old wiring videos with explanation .
@ECFixeljin
4 жыл бұрын
K I'll do it
@gokulkrishna8495
3 жыл бұрын
If possible, Please make a disassemble and assemble video of Diesel engine as well sir.
@ajaynair4657
4 жыл бұрын
Could you post a link to store where I can get Enfield parts..I have 2006 Thunderbird.. Looking to fix crank issues
@greasemonkey1744
4 жыл бұрын
Nice video. Wanted to ask whether i can fit the heavy one to my 1990 model. The stock weight was 8.25 Can i fit this?? Any alterations needed?
@adityabhoyar6599
4 жыл бұрын
Good going 👍
@yashwanthaware8836
4 жыл бұрын
How do you colour those engine parts By brush or spray paint
@ECFixeljin
4 жыл бұрын
Spray paint
@thesignatur8264
4 жыл бұрын
And I hv another doubt about two bush on two Crank side ? It's very confused me ??
@thesignatur8264
4 жыл бұрын
Hi brother ! How to increase crank weight ?? Can u explain about it and how much cost will come for that work , all about it pls ?
@dipeshmondal267
4 жыл бұрын
Awesome sir
@asifhussain-ni6ww
4 жыл бұрын
Nice video
@hhiiuubb
4 жыл бұрын
No oil used for assembling. No packing adhesive as well. How?
@praveenkumark.p8025
2 жыл бұрын
What's the bearing number u have installed on timing side
@iMRANShaikh-hv9dw
4 жыл бұрын
Super 👌👌👍👍
@pritamshet7755
2 жыл бұрын
Which bond should be used here? Grey or gel?
@rohanthakur4306
3 жыл бұрын
Sir mere royal Enfield old std model main 0.20 ka pistan nikla or vo smoke utha rahi thi to ab main bore kara lu 0.40 ka ki kit change karu
@SHUBHAMKUMAR-od2gn
3 жыл бұрын
my love old is gold
@althafgalala9624
4 жыл бұрын
What are the perfect crank weight For slow speed and high speed running and also depend mileage..?
@ECFixeljin
4 жыл бұрын
If we go for heavy crank, in top gear we can move in 15 kmph also we can move in fourth gear while ascending the slope without any gear shifting. But the will be a mild reduction in the mileage. A normal heavy crank weighs about 10.100kg
@althafgalala9624
4 жыл бұрын
@@ECFixeljin mild reduction in the mileage is not a big problem.! What is your opinion Maximum crank weight we can do for better ?
@rohanthakur4306
3 жыл бұрын
Or 2 questions ye h ki mera piston 3 ring waha nikla hai to main usi block main 5 ring wala piston bore kara sakta hu pls Reply sir
@manojarya1132
3 жыл бұрын
Sir i have 2001 model standard which have 8 kg crank weight .i wants to replace it with 71 model crank .it would be better or waste of money?
@ECFixeljin
3 жыл бұрын
Yes it's better for slow speed
@manojarya1132
3 жыл бұрын
@@ECFixeljin thanks for ur help
@rahuljeet5281
4 жыл бұрын
can we install 10kg 2005 old model crank in 8kg old model 2001 case without any changes??? if any required changes than which changes we have to do
@karthiks6326
3 жыл бұрын
Little bit of engine chase cutting
@rahuljeet5281
3 жыл бұрын
@@karthiks6326 from which side brdr? We need to cut
@karthiks6326
3 жыл бұрын
Sides inside the case to accomodate extra welding on crank to make it free
@karthiks6326
3 жыл бұрын
Mine 1999 model bullet wanted to add crank weight, can add upto 12.5 kg But 10 is stantard
@sumanghosh2872
2 жыл бұрын
hi sir, my bullet(1996 model) is knocking in speed of 40kmph at 4th gear. Replacing it with heavy crank will the knocking stop? if yes then will it hamper my engine in the long run?
@jobinvellarithodi
4 жыл бұрын
How the engine case painted?/ Buffing?
@ECFixeljin
4 жыл бұрын
Painted
@jobinvellarithodi
4 жыл бұрын
@@ECFixeljin which paint we can use? Paint with heat resisting property?
@ECFixeljin
4 жыл бұрын
@@jobinvellarithodi Better go for power coating
@jobinvellarithodi
4 жыл бұрын
Thank you so much
@thesignatur8264
4 жыл бұрын
Is need Crank side play ? Bcoz my bullet's engine has side play it's some more ...?? Pls reply brother ?
@ECFixeljin
4 жыл бұрын
Which side you have play?
@thesignatur8264
4 жыл бұрын
@@ECFixeljin -Both side ☹️
@thesignatur8264
4 жыл бұрын
@@ECFixeljin -and how much but sh will come on both side ? Pls
@ECFixeljin
4 жыл бұрын
Keep the crank rod at center and measure the play in both sides and let me know.
@thesignatur8264
4 жыл бұрын
@@ECFixeljin -Ok brother
@sree_thu_lip7642
4 жыл бұрын
Neat wirker
@saharaservicepoint9685
4 жыл бұрын
Sir hindi me nahi ho sakta kya Sir hindi me chalu kro aap ka work hand parfect hai
@chiragrathod1797
4 жыл бұрын
Hi sir, how to clean engine case
@ECFixeljin
4 жыл бұрын
Outerside buffing. Innerside normally I use kerosene to clean followed by water then dry it.
@chiragrathod1797
4 жыл бұрын
Ok
@gagansidhugagana2590
4 жыл бұрын
Sir nat bolt all new ha plz tell me
@ECFixeljin
4 жыл бұрын
Yes
@kamalshakeb3780
4 жыл бұрын
Bro Wat is the cost for g2 bullet engine full restoration ??
@ECFixeljin
4 жыл бұрын
Engine alone?
@kamalshakeb3780
4 жыл бұрын
EC Fix S only engine
@rishivarma819
Жыл бұрын
@@ECFixeljin engine and gear box
@rohanthakur4306
3 жыл бұрын
Sir in this crank how much washer are there
@ECFixeljin
3 жыл бұрын
Which side?
@rohanthakur4306
3 жыл бұрын
@@ECFixeljin both side sir
@rohanthakur4306
3 жыл бұрын
Right side how much washer n left side how much washer
@ECFixeljin
3 жыл бұрын
Timing side - washer + bearing Clutch side - washer+ bearing+ distance collor
@rohanthakur4306
3 жыл бұрын
@@ECFixeljin Thanks sir
@thesignatur8264
4 жыл бұрын
Can u help me brother pls ?
@rafiqali615
4 жыл бұрын
Which year make is the engine?
@ECFixeljin
4 жыл бұрын
1996
@rafiqali615
4 жыл бұрын
Okay but crank shaft looks like 10.5 kgs have u changed it
@ECFixeljin
4 жыл бұрын
No. it's come with 10.5kg crank. limited edition Thunder bird lightening 535cc
@dipeshmondal267
4 жыл бұрын
Sir in last video... You provide me a web site for bullet parts... Is the product they send are genuine?
@ECFixeljin
4 жыл бұрын
I don't know. But the packing is like original. Rate also same as original which I have bought from my place.
@dipeshmondal267
4 жыл бұрын
Okkk sir
@I_infinite_living
4 жыл бұрын
What is the website
@sonykhan1196
4 жыл бұрын
crenk hevi wali hai sir yaa light wali hai
@ECFixeljin
4 жыл бұрын
Heavy 10.1kg
@sonykhan1196
4 жыл бұрын
@@ECFixeljin thenks sir
@sonykhan1196
4 жыл бұрын
agar sir purane old bullet ka spear part parches karna chahe to mill sakta hai compny say genuane riplai plz
@rctransport2921
4 жыл бұрын
Diesel bullet
@nageshnarayana469
4 жыл бұрын
Which year mfg bullet is this...?
@ECFixeljin
4 жыл бұрын
1996
@nageshnarayana469
4 жыл бұрын
@@ECFixeljin looks like its a heavy crank, does 1996 bullet has a heavy crank..?
@ECFixeljin
4 жыл бұрын
No. It's altered to heavy Crank
@nageshnarayana469
4 жыл бұрын
@@ECFixeljin Thanks for your help and good to know....
@nageshnarayana469
4 жыл бұрын
@@ECFixeljin much appreciated..
@rohanthakur4306
3 жыл бұрын
Pls rply sir
@gagansidhugagana2590
4 жыл бұрын
Sir hindi ma bol kar video banyo na kai ha na English samjh ne anda
Пікірлер: 103