Greetings from Adelaide , Australia. After watching this video I purchased a set of these pipes for my ravishing red 650. Also added the DNA air filter. My goodness, these 2 additions brings out the animal in this thing. Absolutely growls now. I've watched a lot of your 650 videos recently and they are fantastic, thank you so much for putting in the effort to make them and help people like myself navigate through my 650 journey! Kind regards, Mick
@y2j132
3 жыл бұрын
What end cans do you use mate?
@michaelollivier2218
3 жыл бұрын
@@y2j132 red roosters mate. Love them!
@y2j132
3 жыл бұрын
@@michaelollivier2218 have you ever tried open headers with stock cans mate?
@michaelollivier2218
3 жыл бұрын
@@y2j132 no I haven't , have you ?
@y2j132
3 жыл бұрын
@@michaelollivier2218 i want to brother. Cops here are downright strict. They dont want any motorcycle around that has a end cans which obviously are loud. Hence i was looking for some open headers paired with OEM cans. Which are just right kinda loud. And cops cant make out modded headers, they just look no different at all apart from colour.
@kilburncounty
3 жыл бұрын
As a London expat and Royal Enfield fan I'm loving your channel - happy new year and keep it up!
@WildlifeMoto
3 жыл бұрын
Glad you are enjoying the videos. Happy New Year 👍
@daveinwla6360
3 жыл бұрын
@@WildlifeMoto - I feel like a local as I now recognize the meat market!
@garagewheelz
3 жыл бұрын
@@WildlifeMoto scorpion exhausts here in India aren't available else that's one of the best sounding metals 👍
@paulstoker7650
3 жыл бұрын
Excellent video. I ordered the exact same header pipes and they arrived yesterday. I ordered the silencers a while ago but decided to wait and fit the whole system in one go. Like you I did the fuel booster and DNA upgrade a while ago ready for the new full system exaust. I'm not too bothered about losing engine braking, I'll just have to take it easy until I get the feel of what the bikes going to be like. Take care and stay safe.
@WildlifeMoto
3 жыл бұрын
Nice one Paul. You’ll love the new system. I enjoy the reduced engine braking, just makes it even smoother.
@blazesboylan7947
3 жыл бұрын
The system looks great; a vast improvement over stock. Happy new year!
@WildlifeMoto
3 жыл бұрын
Yes it’s night and day over stock. Happy New Year mate.
@Shinysideup
3 жыл бұрын
The bike sounds great, the mods so far have been very tastefully done, the bike looks as good as it sounds. Loving the channel.
@WildlifeMoto
3 жыл бұрын
Thanks Ian. Happy New Year chap.
@akshaymulki931
3 жыл бұрын
I think they look beautiful. Been looking for stainless steel replacements for bike ever since I bought. Will be placing my order soon. As for the scavenging leaning out the engine further, you could consider the S&S cam with allows the inlet valves to open before TDC. Might also be time for an aftermarket ECU.
@WildlifeMoto
3 жыл бұрын
Thank you. Yes I might go down the Powertronics route if it’s needed. I’ll upload a more in depth review soon.
@colincoleman2536
3 жыл бұрын
Excellent start to the new year, listening to your bicycle with the new exhaust free flowing headers mod whilst wearing ear phones what a wonderful start to my day it reminds me of the Julie Andrews song The hills are alive with the sound of music, keep them coming old chap well done.
@WildlifeMoto
3 жыл бұрын
Haha, thanks Colin! London is alive with the sound of pipes :)
@colincoleman2536
3 жыл бұрын
Not bagpipes I hope ! Ha
@blackskunk9034
4 ай бұрын
That MercBenz driver thought they were on a bicycle at the lights. Arrogance personified. Great review Mister Moto, keep it up from Mr Interceptor aka Fireball XL650
@andrewedmond7738
3 жыл бұрын
Have a great new year mate and I hope you get to do your tours this year. Love all the mods that you have done to the RE. Hopefully I will be getting one for myself this year so I will certainly be watching to see what you can do next! Great content and a relaxing narrative. Sorry to hear you guys are in lockdown again. Take care and thanks for the ideas and inspiration. All the best from Oz.
@WildlifeMoto
3 жыл бұрын
Hi Andrew, glad the videos have served as some inspiration. If you are looking for a motorcycle project in 2021, I promise you, this is as fun as it looks. I think the U.K could learn something from the way you guys have handled C-19.
@gureno19
3 жыл бұрын
I used to live in Angel about 5 years ago (in Australia now) so sad to see The Albion boarded up now, i lived just off richmond ave around the corner from it 😞.... but it did make this video far more enjoyable! As it was the info i wanted and doubled as a nice ride through very familiar streets of a city i loved! Enjoy mate!
@MzLunaCee
Жыл бұрын
Got these on my 2020 Int, with Lextec exhausts and DNA filter. Bottom and mid range improved immensely and the sound and overrun is fantastic. Highly recommended.
@jangonzales924
Жыл бұрын
Did it make your exhaust sound extremely loud? I am contemplating on installing this headers pipe. The reason is that I commute on my GT and I do not want it giving me headaches.
@MzLunaCee
Жыл бұрын
@@jangonzales924 It comes with decent baffles, so the sound can be kept done to just a bass like rumble.
@dalewintle9969
3 жыл бұрын
Great video J those headers sound amazing 👍 installation looks simple enough looks like a future purchase 😉
@WildlifeMoto
3 жыл бұрын
Thanks Dale. Yes, I’d highly recommend getting a full system for this bike, it really brings it alive.
@brookcampbell2940
3 жыл бұрын
Excellent choice. I wish those were available a couple of months ago. Keep bringing the awesome content. Happy New Year!
@WildlifeMoto
3 жыл бұрын
Cheers Brook. 👍
@DLoneRanger
3 жыл бұрын
Wow mate soo pleased I actually found your video, just what I been looking for. My Hitchcock front pipe headers “same as yours” are still not yet fitted to my Interceptor due to winter. At present Bike is laid up and have Scorpions fitted but standard front pipes at the moment. I have been trying to find out what it’s going to be like when front pipes are on and now I know. I also have booster plug DNA and flange. Thank you so much. I look forward to out of town review and more gold colour?
@WildlifeMoto
3 жыл бұрын
Very cool, we have the same set-up. I’ll upload a more in-depth review once I get to ride it more. So far so good 👍
@makokewish9489
3 жыл бұрын
Kinda sounds like a harley. But holy smokes they sound goooood. Super jelly my friend. Cheers from the colonies 🇺🇸
@garyreynolds562
3 жыл бұрын
She sounds great!
@WildlifeMoto
3 жыл бұрын
Cheers Gary. Yes, very happy with how this turned out 👍
@greentrumpet
3 жыл бұрын
These look so clean, the originals appear too thick (double skin) and the finned ring looks cheap. Hopefully they'll keep their looks. Your pictures do more for them than Hitchcocks site, nice video.
@WildlifeMoto
3 жыл бұрын
Thank you! Yes, they look much cleaner than the originals. It’s also nice to no longer have that welded section for the cats. Cheers for watching.
@-thirteen
3 жыл бұрын
Looking forward to you buying a Powertonic to tune with this setup. I'm buying these for sure. Thanks
@craigevans810
3 жыл бұрын
Sounds beautiful
@stevehoward1679
3 жыл бұрын
Wow!!... It sounded good with the Scorpion's but with those headers added!!!!!! Happy days!!
@WildlifeMoto
3 жыл бұрын
Yes, and the bike really comes alive with this system. Much more free revving and characterful. Happy days indeed. Thanks for watching.
@craigharris3873
3 жыл бұрын
Just got mine sound great easy to fit
@deltabluesdavidraye
Жыл бұрын
It's a slipper clutch so it doesn't engine brake much.Helps a lot with fuel efficiency
@WildlifeMoto
Жыл бұрын
There is less back pressure in the system and you feel that when you cut the throttle.
@bennybenoit754
3 жыл бұрын
Thanks for the vid, great as ever. Also happy new year. I have been waiting for the Tec version. I’m waiting to see how it compares to the 2-1 stinger. I feel that the 2-1 will offer better torque which is more important to me than BHP. That’s my basic understanding of the difference between a 2-1 and 2-2 but I’m no expert. I’m also drawn to the 2-2 as I love the look. In short I need to decide over looks or slight difference in performance characteristics Love a first world problem for the new year!
@WildlifeMoto
3 жыл бұрын
Happy New Year. Logic says the 2-1 will offer better performance when running correctly, it will also offer a greater weight saving. I just can’t get down with the look of it though. This system offers a good compromise between performance and classic looks.
@bennybenoit754
3 жыл бұрын
I think I agree but I’m going to sleep on it a bit more. To be fair I do also like the look of the 2-1 Stinger from Tec.
@bennybenoit754
3 жыл бұрын
Also. Would need to mod the side stand If I get a 2-1 as it sticks out a lot when that left pipe is removed.
@bennybenoit754
3 жыл бұрын
Sorry, one more. Would you consider telling your audience your planned movements when you get round to your road trip? I would be keen to meet up for an unsocialy distanced coffee and a tyre kick. I’m sure you would pass some of your audience wherever you went.
@HaggisPower
3 жыл бұрын
Very little performance improvement with 2:1 - done plenty of testing and my 2:2 is still faster
@killacoiler1707
Жыл бұрын
I am curious to know whether these headers would pair well with a set of Emgo Cocktail Shakers? My buddy has a set on a Triumph and they were a wonderful upgrade that not only provided a bit of performance but gave a very deep voicing to the engine that commanded intrigue when you rolled by. I am unsure what headers he used but if the Hitchcocks will mate up with those Cocktail shakers my lands will that be a thunderous symphony. I have always enjoyed the sound of a British Twin with a set of pipes that allowed it to sing like a Robert Plant at a Led Zepplin concert. In my opinion, next to an American V-twin and a Ducati V-twin, it is the most aggressive, menacing, pulse jumping, and smile cracking engine sound on the planet; I see these different exhausts as just amplifiers for the front man at the show.
@johnk7814
3 жыл бұрын
They do sound great, something else to put on my list of future mods.
@paulmessenger1006
3 жыл бұрын
Looks great. My 3 other bikes have stainless down pipes. Love the straw patina. Now you need stainless bolts. Stood out like a sore thumb with engine close ups. Stainless dome nuts on the headers. Oh now needs a paint job to stand out! Can recommend TJC designs in Bristol. He did a great job on mine.
@WildlifeMoto
3 жыл бұрын
Thanks for the tip Paul. Where did you order your bolts from? I’d be interested in doing this.
@paulmessenger1006
3 жыл бұрын
@@WildlifeMoto I got a kit here. Message me on fb got other stuff.
@udbhav122351d
3 жыл бұрын
How much do they cost? Do you deliver to India?
@chriscoates2399
3 жыл бұрын
I'm Excited!!! The Bike sounds Great I'm sure watching I could feel that smooth power rumble ... The next thing to ask is can I have a ride , lol , I'm waiting on delivery in two weeks for my Glitter and Dust interceptor With Lextek slipons .... Cant wait , have too ! . Ok Safe travels
@WildlifeMoto
3 жыл бұрын
That’s going to be a very long two weeks for you. Congratulations on the new bike, great choice with the Glitter and Dust! Love it.
@mviv6339
3 жыл бұрын
Bet it gets delayed..
@chriscoates2399
3 жыл бұрын
@@mviv6339 It was 8 to 10 weeks wait from the get go , surely that's delay enuff , Sooo Here's Hopeimg ..
@brianperry
3 жыл бұрын
Bike sounds great, reminds me of the days of Brit bikes, coffee bars and ''If there's one fing that I liok, its a burn up on me Bike'' Wonder if any companies will come up with 'sweptbacks 'n' Meggers.....
@WildlifeMoto
3 жыл бұрын
Absolutely. Nothing like a blast out to the Tea Hut on a Saturday morning.
@EdwinRaj5700
2 жыл бұрын
Hi, did u tried this setup without a booster plug, if yes let me know how was the performance.Please post another video with baffles
@raghavendrap3185
3 жыл бұрын
i am new to channel but i can say really impressive videos and bike mods are great..... if i get chance surely i love to buy your bike.... Just to showcase it..in India...... Love from India (Bengaluru)
@WildlifeMoto
3 жыл бұрын
Thanks you sir 👍
@samsonman2000
3 жыл бұрын
This a is a great review man. I'd love to see some all your other modifications. What impact do you think a free flowing system has on the bike/engine long term? I'm all about trying to improve the bikes life. I don't like changing bikes a lot.
@WildlifeMoto
3 жыл бұрын
Thanks! Still running longer term tests, but I can tell you that the bike feels a lot more free revving, and engine breaking is reduced. The engine feels less stressed (not that it felt stressed in the first place). I'll make some updates soon.
@Gambo916
3 жыл бұрын
Another great WM Enfield vid. Good to hear the catless headers are doing the biz at town speeds. Maybe a future vid with some upper rev range performance/high speed testing please? I had a BoosterPlug when I fitted Akra headers to my RnineT, and it worked well. However, driveability and performance right throughout the rev range improved dramatically when I later removed the BP in favour of a remap instead. Perhaps a remap is something to consider for the future....plus it would make some great vid content for this super channel. Happy New Year Doood.
@fasthracing
3 жыл бұрын
Who did the remap on your R Nine T?
@WildlifeMoto
3 жыл бұрын
Absolutely, I’ll be taking it out of town for a proper ride very soon. Down the line I may well switch the BP for a PC with a custom map.
@Gambo916
3 жыл бұрын
@@WildlifeMoto Have you seen the Revelry vids (#4 and #5) about EFi tuners? They weigh up the various options and conclude the PowerTronic is the most flexible and tuneable choice.
@WildlifeMoto
3 жыл бұрын
@@Gambo916 That this evening's viewing sorted. Thanks for letting me know about that
@SrinivasGanesh
3 жыл бұрын
Happy New year 2021!! Those free flowing exhausts do sound great!!! I so wish the loud exhausts were legal in India! Cheers mate!
@WildlifeMoto
3 жыл бұрын
Happy New Year mate.
@hamzarazvi4489
3 жыл бұрын
Hello! Lots of love from India!!, I had a doubt about the headers, are the dimensions similar to the stock pipes?? And will the Lextek AC1 exhausts fit on these pipes.?
@WildlifeMoto
3 жыл бұрын
Dimensions are the same my friend. If they fit the stock pipes, they will fit these. Cheers.
@doyleyburger2245
8 ай бұрын
Great video. Do you have a vid on installing the LSE risers and bars ? Cheers
@fiamun
3 жыл бұрын
Great thanks. I like seeing the city. If people want to avoid discoloured pipes, spraying VHT engine header paint down the pipe helps. Visit their web site for more info.
@daveinwla6360
3 жыл бұрын
By "down the pipe", do you mean down *inside* the pipe?
@WildlifeMoto
3 жыл бұрын
Yer, I’ve heard of people doing this. I guess the idea is that the paint works like a heat shield.
@fiamun
3 жыл бұрын
Yes, down the pipe means inside the header. Coat the inside, acts as a heat shield and reduces discolouration.
@ranveer88
3 жыл бұрын
Would you guys pick this over the lextek exhausts , not many videos to compare both ? Good job over the video , keep up the good work .
@thecasualrider2668
3 жыл бұрын
New here, stayed here i love thia bike.
@WildlifeMoto
3 жыл бұрын
Thank you my friend
@blackskunk54
4 ай бұрын
Those Scorpions look rather tasty
@WildlifeMoto
4 ай бұрын
They are great. Lovely look and sound.
@gorsair7458
3 жыл бұрын
Exhaust sounds great. What helmet are you using? Hello from Perth 🇦🇺
@WildlifeMoto
3 жыл бұрын
Cheers. The lid is a Nexx X.G100 Purist.
@jeffarnie
3 жыл бұрын
Are you now in competition with Royal Jordanian. Haha. My son picks he's ravishing red interceptor up in the next few weeks and will be doing some of what you've done. The preference is to eliminate much of the chrome but can't find a black exhaust system.
@heldersantiago6515
3 жыл бұрын
Revelry Cycles and Verex in Tasmania both have stainless downpipes like these. One or both of them offer black ceramic coating as an option. I got mine from Verex, but I got the brushed stainless version.
@WildlifeMoto
3 жыл бұрын
Haha. I don’t think RJ has anything to worry about. Scorpion also do a black version of these cans too. Good luck to your son with his new bike. Great choice!
@jeffarnie
3 жыл бұрын
@@heldersantiago6515 Thank you for the info. We will look into that.
@irishbogman
3 жыл бұрын
Bike looks and sounds great, just wondering what is the total cost of the mods to your bike since new?
@WildlifeMoto
3 жыл бұрын
I dread to think. Probably around £3k. I’ll do a video with full costs soon. Cheers.
@irishbogman
3 жыл бұрын
@@WildlifeMoto Oh bless, looking forward th that video, thanks for replying
@_JimS
3 жыл бұрын
GEEZ! What are they doing over there with the road tax money....buying pizza and beer? Yikes! I personally like engine brake, cuts down a lot on brake pad wear and I like the cornering control too. How much would you say it cuts down? Glad you brought this point up because I was going to ask you about that. Also do you lose any low end torque and if so does it gain on top end? Thanks
@stevesanelli90
3 жыл бұрын
Happy new year WM! Sounds great! Would you be able to list your exact handle bar type. Eventually, I like your setup! Very much! Cheers!🇦🇺
@WildlifeMoto
3 жыл бұрын
Hi Steve. Links to the parts are in the description. LSL Superbike bars, Domino XM2 throttle, Brembo RCS15 brake master cylinder, TWM clutch perch, Domino Starter, Motone Customs Up and Over Risers, Oberon Performance Street Fighter mirrors, Grip Puppies. I think that’s everything :)
@stevesanelli90
3 жыл бұрын
@@WildlifeMoto thanks for that! I do especially like your bars & risers. What else do you want or would like to have fitted as extras to customise your beautiful machine. Have you test ridden the 660 Aprilia?
@WildlifeMoto
3 жыл бұрын
@@stevesanelli90 Next mod will probably be the tyres I think, that a big one for me. I’ve not ridden the 660 yet, but I did buy a V4 Tuono recently.
@ijaxon6675
Жыл бұрын
Going to feel a little more heat from the engine.
@WildlifeMoto
Жыл бұрын
Just a little.
@mrsilbo6499
3 жыл бұрын
HNY old chap! Lovely bass sound with those new downpipes on. When are you dyno-testing your bike, for the fruits of your labour (and cash!) to be revealed?
@WildlifeMoto
3 жыл бұрын
Happy New Year sir. Yes I should probably get a dyno done at some point. Might turn out to be the worlds most expensive 5HP haha.
@daveinwla6360
3 жыл бұрын
@@WildlifeMoto - I think 3HP is more probable without an ECU re-map. But let's hope.
@deniseroberts6908
10 ай бұрын
What’s the make of your helmet. It looks good.
@tonymartin3780
3 жыл бұрын
Happy new year 🍾🍸 sounds great looks great , stay safe 👍
@WildlifeMoto
3 жыл бұрын
Thanks Tony. Happy New Year to you too mate :)
@markunderwood9727
2 жыл бұрын
Sounds great plus looks a treat! Are you running a powertronic or dyno tune box Im on a full tec system with a bhp uk ecu remap which make the bike pull like a train
@WildlifeMoto
2 жыл бұрын
Cheers! No maps. Just running a booster plug.
@drmanojmanohar
3 жыл бұрын
Definitely sounds good but what of the environmental emission norms ? A lot more smoke seen in the Comparo video(pre and post header change). UK cops lenient on these mods ?
@WildlifeMoto
3 жыл бұрын
Police are more concerned about excessive sound and honestly these pipes are not that loud with the baffles in.
@jeremystafford8374
3 жыл бұрын
Sounds and looks fabulous,, are you expecting any detriment to fuel economy.
@WildlifeMoto
3 жыл бұрын
Thanks J. I would expect a small drop in MPG, but nothing major. I’ll let you know in a future video.
@jeremystafford8374
3 жыл бұрын
@@WildlifeMoto thanks for your reply, looking forward to watching future content. Thanks for your efforts with the channel, hope 2021 is a good year for you and your channel.
@WildlifeMoto
3 жыл бұрын
@@jeremystafford8374 Thank you Jeremy. I look forward to publishing new videos very soon.
@PaulJohnson-hw6vs
3 жыл бұрын
Great tutorial on installation, just one question, will the motorcycle pass an MOT with those pipes on
@WildlifeMoto
3 жыл бұрын
Should do. There is no emissions test or DB test. It’s up to the discretion of the tester. If in doubt just put the baffles back in.
@PaulJohnson-hw6vs
3 жыл бұрын
@@WildlifeMoto Many thanks for the reply 👍🏻
@arjunshanker2065
3 жыл бұрын
G’day from down under.. loving the videos. Are you finding the bike is running a bit lean even with the booster plug after the headers?
@WildlifeMoto
3 жыл бұрын
Hi Arjun, i;ve only done a few miles since installing the headers and all seems good so far. I want to test more before I can say for sure (just can't do it at the moment due to lockdown). I'll get some more videos published as soon as I have got some more miles clocked up. Cheers.
@arjunshanker2065
3 жыл бұрын
@@WildlifeMoto thanks mate. Look forward to it. I have recently changed the extractors on my bike as well and I am feeling a lot more heat coming from the engine even with the boosterplug. It was fine with the air filter and stock extractors. Our thoughts are with you lot in these challenging times.
@daveinwla6360
3 жыл бұрын
Happy 2021! Have you compared the Hitchcock pipes with and without the Booster Plug?
@WildlifeMoto
3 жыл бұрын
No yet, but that’s a good idea!
@daveinwla6360
3 жыл бұрын
@@WildlifeMoto - It will be interesting to see (hear) if it affects crackling/popping on deceleration.
@-thirteen
3 жыл бұрын
Very interested to know this. I bought Verex headers but hesitate to install without the plug.
@hermannbutz6693
3 жыл бұрын
Happy new year ;-))
@WildlifeMoto
3 жыл бұрын
Happy New Year sir :)
@hermannbutz6693
3 жыл бұрын
@@WildlifeMoto The same for You ;-). I'm curious, if you will find a 4 piston caliper for the interceptor. I tried but was not successful . Good Luck and best regards from Germany
@jain2430
2 жыл бұрын
Free flow can any harm for bikes???
@tomg6284
2 жыл бұрын
Unplug the O2 sensor do not twist the wire!
@Canteaus
3 жыл бұрын
Awesome video! Thanks! Question: do the headers with the stock silencers? Thanks
@WildlifeMoto
3 жыл бұрын
They would connect to the stock silencers but I’m not sure if you’d see any performance gains.
@Canteaus
3 жыл бұрын
@@WildlifeMoto thanks for the reply, im actually thinking of getting the S&S pipes, which is why i asked about the stock fit!
@joelwhite193
3 жыл бұрын
Just got the same headers installed and am loving them! Did you find that one muffler is lower than the other? After the install my right one is lower than the left.
@WildlifeMoto
3 жыл бұрын
I didn't notice that. I'll go an have another look
@joelwhite193
3 жыл бұрын
@@WildlifeMoto if it helps, with the bike on the center stand, I measured from level ground up to each muffler end and confirmed about a 1” difference
@mviv6339
3 жыл бұрын
Seamless pipe Ss304 for normal corrosion resistance Ss310 for high temperature Long nose plier Rubber bush Anti seize compound
@WildlifeMoto
3 жыл бұрын
Thanks mate. Hard to find the right words when riding lol. These pipes are 304T according to Hitchcocks.
@bcolinranken
3 жыл бұрын
Abundantly clear... there’s no difference
@WildlifeMoto
3 жыл бұрын
Much deeper growl with a crisp top end rasp with the new headers. Maybe the full sound spectrum isn’t coming through on your speakers?
@imochasingh6875
3 жыл бұрын
Why was there white smoke while revving the engine?
@ReddyHHH210
3 ай бұрын
Hi daddy , I got Powerage headers for my 650. I want mine to change color to that copperish brown … shall I take brushed steel or glossy steel headers ?
@WildlifeMoto
3 ай бұрын
Go for non brushed as you can polish them easier. If you want yours to stay a nice straw colour, you’ll have to polish them back to shiny steel from time to time. It won’t take long for them to go dark brown or even blue.
@nashspatel
3 жыл бұрын
Hi WM, what are Torque number on the header pipes, I used 25 NM is that right? Thanks
@rohanbhutani8439
2 жыл бұрын
Sounds great. Does it require a piggyback ecu to be installed?
@WildlifeMoto
2 жыл бұрын
Nope, it runs fine with the factory map.
@theradiantchild
9 ай бұрын
@@WildlifeMotodid you ever do anything with the ECU or just running booster plug?
@jamesa6272
2 жыл бұрын
Did you have to make any efi adjustments ?
@chrisgraham5186
3 жыл бұрын
Seems fine in London's 30 mph zones… but how is it cruising at 130kph/85mph on an autoroute in the southern sunshine? (or even at 70 on a UK dual carriageway or motorway?)
@WildlifeMoto
3 жыл бұрын
I’ll get the bike out for a proper ride soon. All seems good so far, but haven’t ruled out adding a map if needed. Cheers.
@-thirteen
3 жыл бұрын
Doing this without booster plug or tuner.....will it work well? My headers arrive today but I did not purchase a fueling device. I'd hate to do it and have it too lean to ride
@jonasp27
Жыл бұрын
Do you have any experience on the headers damaging the engine? I am thinking about getting them too but I‘m a bit worried that they damage my bike😬
@WildlifeMoto
Жыл бұрын
They won’t damage your bike. Have a chat with Hitchcocks if you have concerns.
@pravirop3161
5 ай бұрын
Bro whats the ID and OD of these pipes?
@davidl4747
Жыл бұрын
What are the physical differences between the stock header pipes and the Hitchcock?
@WildlifeMoto
Жыл бұрын
Stock pipes are double walled with a smaller internal diameter and chrome plated on the outside.
@HashtagDeba
3 жыл бұрын
Does this setup reduce fule economy?? While charging up he initials.. And I also like to add a channel Named @King Indian for Turbocharged Interceptor 650.. Look out for that
@WildlifeMoto
3 жыл бұрын
They might slightly reduce economy. I saw that video. Crazy!
@RMD992-f2n
11 ай бұрын
do you find the noise too loud with the straight through exhaust? i want the deep growl and burble but im worried its going to be too loud. should i just do a slip on with stock headers with the cats?
@WildlifeMoto
10 ай бұрын
Not really but I always ride with earplugs because of wind noise. I did test the bike with baffles and it’s not that loud.
@ishanaaudio7073
Жыл бұрын
Sir after changing your Header band pipe any problem?
@WildlifeMoto
Жыл бұрын
Nope 👍
@RMD992-f2n
10 ай бұрын
are the bore on the hitchock headers wider then the stock variant? i was also looking at tec big bore headers and they are considerably wider. would this be bad with a stock engine?
@WildlifeMoto
10 ай бұрын
Yes they are. The stock pipes have a chrome outer pipe with a narrower inner section. The Hitchcocks pipes are single wall. The exhaust on this bike is pretty simple so I wouldn’t worry about it. Hitchcocks have tested their pipes on their Dyno so maybe ask them about their findings.
@russellscianimanico6549
3 жыл бұрын
Unless I missed it in this video, the Hitchcock headers don’t have a cat in them right?
@WildlifeMoto
3 жыл бұрын
Correct. These do not have a cat.
@frankstocker5475
3 жыл бұрын
Free-flowing, no cat.
@johncapewell9480
3 жыл бұрын
These modifications, what impact do they have on MOT and insurance?
@WildlifeMoto
3 жыл бұрын
Non on MOT everything is road legal. Insurance, you just need a policy that lets you mod your bike. Some policies let you mod but will only return you to stock, other policies will cover your custom parts as long as you tell them about them (more expensive).
@Roger_Ramjet
2 жыл бұрын
You sound like a top of the pops dj from the 1980's. That's ok w me.
@vishalnair4059
3 жыл бұрын
did you change your handle bars? do you have installation video on them?
@WildlifeMoto
3 жыл бұрын
Yes these are LSL Superbike bars. They do show up in a few videos but i've not done a full install.
@leosowers
3 жыл бұрын
I was wondering if they would turn yellow or blue and it looks like yellow it's my understanding that that is a sign of a lien running engine am i my mistaken? what causes the difference between blue and yellow coloring of exhaust systems?
@WildlifeMoto
3 жыл бұрын
Hi Leo. My understanding is the blue indicates lean as blue indicates a hotter system.
@fabianoH5N1
3 жыл бұрын
I usualy get alot Bangs and pops when i get of the trottle but with still 5 - 10% trottle . So Reving up to 5 then going off the trottle and open it a tiny bit .
@WildlifeMoto
3 жыл бұрын
Nice! Are you running these headers?
@fabianoH5N1
3 жыл бұрын
@@WildlifeMoto iam using simmilar ones from BS exhaust . Full Euro 4 exhaust . www.dnt-racing.com/product-category/bs-exhaust/royal-enfield-bs/twins/
@fabianoH5N1
3 жыл бұрын
@@WildlifeMoto but i think you saw my picture on the forum with bluish tint on the headers
@daveinwla6360
3 жыл бұрын
Do you have a Booster Plug installed, Fabiano?
@fabianoH5N1
3 жыл бұрын
@@daveinwla6360 no . Only my full exhaust system . Ngk iridium sparkplugs , red caps and cables . Dna stage 2
@batistabat1743
Жыл бұрын
Have u remaped ur ecu.?
@alancampbell1008
3 жыл бұрын
Shit...another goodie I'm going to have to buy... 😂
@WildlifeMoto
3 жыл бұрын
Oops, sorry about that. They are good though :)
@alancampbell1008
3 жыл бұрын
@@WildlifeMoto 😂😂😂
@-thirteen
3 жыл бұрын
What are the chances you gained a couple HP from these pipes?
@WildlifeMoto
3 жыл бұрын
I'd say quite high as the Cat is totally gone now.
@frankstocker5475
3 жыл бұрын
Any DB readings with & without baffles?
@WildlifeMoto
3 жыл бұрын
Sorry, not done that. Not painfully loud though
@RAHUL-dt5xm
Жыл бұрын
Is it a good idea to use the header with stock exhaust can
@WildlifeMoto
Жыл бұрын
The cat is in the header so yes. Having said that, those stock mufflers are ridiculously heavy and look to big for the bike in my opinion. Best to do the whole system.
@mred7030
3 жыл бұрын
santa has been good to you . one small tiny tiny remark , i would like the pipes arched not angular , just saying .
@WildlifeMoto
3 жыл бұрын
Hi mate. The bend in these pipes follow the same lines as the factory pipes. I would be great to see someone produce a curved version. That would be very cool.
@mred7030
3 жыл бұрын
@@WildlifeMoto someone in aussie makes them .
@Andrew-jh5uv
Жыл бұрын
Hitchcocks advise no ECU mods are needed id go with that advice ....
@abhinav13d
3 жыл бұрын
What material this header pipes made from ?
@WildlifeMoto
3 жыл бұрын
Stainless steel
@guri131
Жыл бұрын
Do unplug the cat sensor rather than putting so many twists on the wiring
@WildlifeMoto
Жыл бұрын
Right you are 👍
@theradiantchild
9 ай бұрын
Came to say the same thing
@SteveW67
3 жыл бұрын
@3:48 "prat'.....😂
@WildlifeMoto
3 жыл бұрын
The classics are the best.
@colincoleman2536
3 жыл бұрын
Stress busters more smiles per miles will be buying an Enfield next bike plus the mods I've been introduced to here.
@mviv6339
3 жыл бұрын
Your route required the Himalayan RE . More off road..
@WildlifeMoto
3 жыл бұрын
Haha, yes some of London’s streets are pretty awful. That and the never ending speed bumps.
@andysmith2013
3 жыл бұрын
Headers? Have you had a Harley chip implanted?
@WildlifeMoto
3 жыл бұрын
Ouch. I’m only 39 mate!
@internetpolification
3 жыл бұрын
Hardly “install” here. More like showing the finished job
@MegaMalaga1
7 ай бұрын
Good morning! One thing to keep in mind when using straight exhaust pipes without catalytic converter or db killer and which is very beneficial to the engine itself is the reduction in engine operating temperature obtained by performing this modification. I have found on my 1993 Suzuki Bandit 400 that the idle temperature is about 200° C, 392°F, after 10 minutes started and on my car, a catalyzed 2021 Abartg 595 Competizione, it reaches about 380°C, 716°F. I have not been able to check the exhaust temperature of the bike when running, but in the car it reaches well over 800°C, 1472°F. By installing an exhaust system without catalytic converter we get the engine to work at a much lower temperature, and that is always positive. Greetings with the middle finger of my hands to Greta Thunberg and the globalists of Agenda 2030.
@MegaMalaga1
7 ай бұрын
I didn't mention in my previous message that the temperature point was at the exhaust manifolds of the bike about 15cm from the engine (about 5.9 inches).
@iniyavankarthikkaran8575
3 жыл бұрын
And achieved what exactly?
@mred7030
3 жыл бұрын
pleasure
@garethlipyeart6520
3 жыл бұрын
not as good as my t140d with reverse cone mega nothing like it lol.
@pipchikas89
3 жыл бұрын
Dude the amount of money you pouring into this bike, you should’ve just got a real deal triumph
@WildlifeMoto
3 жыл бұрын
What would you recommend?
@pipchikas89
3 жыл бұрын
I think even street twin spanks this bike in all the categories. However bikes are very personal choice and if you like spending thousands on budget bike and never getting it back who I’m my to say what people should do lol.
@WildlifeMoto
3 жыл бұрын
@@pipchikas89 These are not investments, they are toys. But seeing as you are so concerned about my financials, I’ll set your mind at ease. Using benchmark depreciation of 25% over two years, a stock Street Twin will cost you £2125 and an RE £1375. All my aftermarket parts can either be re-used or sold separately. So let’s say I get 70% of my £3k investment back. At the end of two years, I have lost £2275 and Mr Speed Twin has lost £2125 (if the bike is 100% stock). Mr Speed twin has also paid more in insurance, servicing and fuel. With that in mind, my losses are in line with expectations. I’m not getting into a debate about what bike spanks what, that’s just silly.
@pipchikas89
3 жыл бұрын
@@WildlifeMoto As long as we all on two wheels that is all it matters. You made a nice bike to dope bike, enjoy!
Пікірлер: 233