I like the minimalist structure, where everything is tied together through the shroud tube.
@jonathanmassaro3142
Жыл бұрын
Great video and amazing gun. Finally it fills all the gaps
@jeffojibway9284
Жыл бұрын
Dang great improvements to the gun!
@_miranHorvat
Жыл бұрын
Nice. An adjustment knob for the scope rail in 5mrad clicks would be a real gem!
@OriOnTheIguanaHunter
Жыл бұрын
Oh Gregor! Thanks for this video, I feel like I'm behind on this one, I didn't even see it coming!
@gregorkamensek3923
Жыл бұрын
No worries! RTI surprised me as well with this one :)
@kevintravis2154
Жыл бұрын
RTI finally did it. Informative video as usual.
@gregorkamensek3923
Жыл бұрын
Thanks!
@pipzza6733
Жыл бұрын
hope the regulator works well eventually, and no creeping, will see in future videos how it goes... thanks for this very entertaining video.
@TripleGRogerLait
Жыл бұрын
What a great video , I learnt lot la from this . I can’t wait to get my P-3, I am very interested to see how your gun shoots pellets and slugs . I will be using JSB redesign’s in competition and I have been told that I can get over 1000 fps using them and still stay accurate. Can’t wait to find out
@gregorkamensek3923
Жыл бұрын
With RPB barrel, I would use slightly lower velocities with redesigns for competition, somewhere around 950 fps. At 1000 fps, they might start to spiral at longer ranges. If you want 1000 + fps accuracy with redesigns, you would need RTI long range barrel (LR 5.5)...
@TripleGRogerLait
Жыл бұрын
@@gregorkamensek3923 Thank you for that . I am looking forward to getting my P-3, I am looking forward to taking it to EBR , will you be going ?
@gregorkamensek3923
Жыл бұрын
@@TripleGRogerLait I hope, but I am not sure yet...
@stedyone1090
Жыл бұрын
More P3 reviews needed for me
@georgegandara6054
6 ай бұрын
Very complete review....!!!!!!🇨🇱👍
@waynemiller2843
9 ай бұрын
Great review on the P3. It’s exactly the video I was looking for. Have you determined the best pellets and slugs for the P3?
@gregorkamensek3923
9 ай бұрын
Depends on the caliber, .22 I would go with JSB monster redesigned and slug about 25 grain .218 size, for .25 JSB Kind Heavy and slug about 35 grain in .250 size.
@garymurray5361
Жыл бұрын
thanks Gregor. Some excellent improvements on the P3, credit to RTI. Constant development. Hopefully some of the upgrades will be able to fit the P2. Especially the cheek rest and the rail. My income won't stretch to a new Prophet 3 years in a row 😢😅. One can dream and lust though.😂 The additional machine work on the rpb barrel now makes sense. Another puzzle sorted 👍.
@gregorkamensek3923
Жыл бұрын
There are not many interchangeable parts between P2 and P3 unfortunately. The really redesigned most of the gun for P3.
@sightpcp
Жыл бұрын
Hi. Great job. Thanks
@nickbarton7311
9 ай бұрын
Thanks for another great video, could you please cover adding plenum extensions
@gregorkamensek3923
8 ай бұрын
With P-3 the plenum is already enlarged... so no need to add any extensions
@sonan7216
Жыл бұрын
Forget the difference of m.s. that varies from minimum to maximum with the new valve adjustment roulette, thank you.
@miljanmilivojevic4905
Жыл бұрын
I hope to get mine soon😍
@joelee3111
Жыл бұрын
I have a RTI P3 Performance .30 in fde comig from Aoa, got the acra rail adaptor too. Can't wait.!!!!!! I'll be trying JSB 50.15 & ZAN 56gr 1st ring out to see what it does at my 100 yard range.
@redgum1340
Жыл бұрын
Not too bad, RTI have Finally started delivering a rifle worthy of the price they charge. BTW, Still waiting on your video showing detailed parts and function of the balanced valve...
@gregorkamensek3923
Жыл бұрын
Coming...
@redgum1340
Жыл бұрын
@@gregorkamensek3923 Excellent! I'm actually counting the days to see your video. Very excited, Gregor. I'm sure it will be detailed with excellent resolution video 🙂
@gregorkamensek3923
Жыл бұрын
@@redgum1340 Thanks. Resolution will be high, that is for sure as I am kind of camera gear nerd :) I wish that I could put out videos faster, but it is a lottery when I am able to go and record with day job and crazy rainy weather this year...
@redgum1340
Жыл бұрын
@@gregorkamensek3923 Yes Gregor, I know you love camera gear, that's why I knew it would have great resolution. You always do a very good job with your videos. Indeed, the weather has gone mad and it will only only get worse. The greed of man has just about ruined this planet and our children will suffer badly. The world, as we know it, is in its last days...
@gregorkamensek3923
Жыл бұрын
@@redgum1340 Yep, you couldn't said it better...
@user-yk6ko9ob8t
Жыл бұрын
Hi Gregor does this have the 1 in 32 twist lr barrel? On the Rti website it says the prophet 2 has a 1 in 16 twist RPB barrel? Really like the look of the p3. Looking for something to shoot light slugs and heavy pellets. Thanks
@gregorkamensek3923
Жыл бұрын
All new RTI guns in .22 and .25 cal have RPB barrel with fast twist (close to 1/16") and they are designed to be used for slugs as well as pellets. RTI was offering the .22 cal 1/32 barrel barrel that was designed specifically for pellets (and is till this day in my opinion one of the best barrels for shooting pellets at high velocities), but I don't think they are anymore because of lack of interest. Everyone wants to shoot slugs now :). That barrel was called 5,5 long range (had engraved 5,5LR). RPB is just as accurate with pellet as it was 5,5LR, you just need to be careful not to have too high velocity (typically under 900 fps but it depends on the pellet). The 5,5LR can hand 100 + yards MOA accuracy with JSB Monster redesigns at 1050 fps!
@rickrazz7136
11 ай бұрын
Thanks for the video. I have the priest 2 with three barrels including the .22 long range barrel for the JSB monster pellets. Will these barrels work in the P3 also? Also, my bottle leaks air when filling when fully tightened or loose. This began after a flight across America. Is this an o-ring issue? Thanks
@gregorkamensek3923
11 ай бұрын
The barrels are interchangeable. The leak is most probably an o-ring issue.
@012fire012
Жыл бұрын
@Gregor, Thanks for these awesome videos you changed my mind and now i'm in the hunt to buy one! 😁 Please could you tell me what is the low possible working pressure and the highest? with their new regulator, ao the gun shoots fine and no Valve lock! Thanka in advance buddy... great work! 👍
@gregorkamensek3923
Жыл бұрын
Thanks. Reg. goes from 80 to 180 bars. You might be able to stretch it a bit but I would stick to these limits.
@stedyone1090
Жыл бұрын
Real nice advancements
@pepi_gets_it_done1861
Жыл бұрын
Good job putting this video together. Very useful. Thanks for your work
@gregorkamensek3923
Жыл бұрын
Thanks :)
@mikemassie8966
Жыл бұрын
What bi-pod are you using here? (Great video!)
@gregorkamensek3923
Жыл бұрын
Thanks. I am using Accu-tac bipod.
@TheRforestr
3 ай бұрын
Do you recommend an additional plenum? Thanks for the informative review.
@gregorkamensek3923
3 ай бұрын
There is no point for additional plenum on P-3 as it already has more than enough volume for all calibres. Maybe if they release 9mm but even with 9mm, I got about 900 fps with JSB pellets.
@heretoeternity3311
11 ай бұрын
Gregor, what do you think of fast Twist rate for .22 for this gun? Why did they walked away from LR barrels?
@gregorkamensek3923
10 ай бұрын
Standard twist for airguns is about 1/17" (+-). That is a relative fast twist for pellets. The LR barrel has 1/32" twist. This twist is excellent for pellets (you can shoot pellets up to or even over 1000 fps and still retain pellet stability) but it is not good for slugs... Since there is all the rage about slugs now, they had to move to something that shoots both well even it it means that it shoot both slightly worse than a dedicated barrel would. This resulted in our development (RTI and I) of the RPB barrel. This barrel will shoot pellets just as accurately, but you cannot shoot them at that high velocity (if you still want accuracy)... You can check my other videos for more in depth explanation.
@tenseken
Жыл бұрын
I just wish all the issues on the p2 will be resolved in the p3. The leaking valve. Mine still out for service and it’s already a month
@gregorkamensek3923
Жыл бұрын
I am sorry to hear that.
@tenseken
Жыл бұрын
@@gregorkamensek3923 yeah I respect and follow that’s what made me buy an Rti product but my experience and expectations were different
@gregorkamensek3923
Жыл бұрын
@@tenseken Trust me, I am the king of getting faulty products. I actually quite known withing my close friends about that :) So I know how it is. Maybe that is the reason why I become such a DIY guy... LOL
@tenseken
Жыл бұрын
@@gregorkamensek3923 i was offered for an upgrade to a p-3 but im still waiting for your shooting test to decide on it
@gregorkamensek3923
Жыл бұрын
@@tenseken I wouldn't wait... I have already shot the P-3, in terms of performance, it is the same as P-2, sam barrel same performance. I would go for it right away!
@igolfat8894
5 ай бұрын
Great review Gregor. Have you completed Part 2 yet?
@gregorkamensek3923
5 ай бұрын
I decided that I will only make a video about disassembly and valve operation as the rifle is basically the same in terms of operation, power and accuracy as Prophet 2...
@pdevine999
Жыл бұрын
My only complaint with the prophet was the magazine , especially the space between the barrell and how it squeezes in , to get a tight fit when changing barrels ( 177 to 22) for example I had to constantly keep adjusting it so I didn't get any air release from the back of the barrel , I could feel it on my eye when shooting . If i moved the barrel forward even 1mm the air would stop leaking but the magazine felt loose , still an awesome super accurate rifle even for benchrest, but just didn't have that slickness that my air arms had when loading pellets , has any of this been improved ?
@gregorkamensek3923
Жыл бұрын
I assume you issue was not due to barrel position but rather that the screw for fixating the barrel was without o-ring. This was solved now, I mentioned in the video that there are three screws now and the first one has an o-ring. The gun also has more slick feeling, the only thing that is quite sharp are the two side covers but you can only feel that if you grab the gun by the barrel/hose between the body and the front, but that almost never happens in my case.
@pdevine999
Жыл бұрын
@@gregorkamensek3923 Thanks for the reply , yes my barrel screw doesn't have an O-ring , I am on my 3rd barrel screw , they wear out pretty quickly but I am always switching barrels . Hopefully someone at the range picks one of these up and I can try before I buy . I am just looking for accuracy these days for bench shooting .
@gigidag4651
Жыл бұрын
Is the power level for this P3 the same of the P2 ? Just curious to see some chrony numbers expecially in .25 cal.
@gregorkamensek3923
Жыл бұрын
Yes, it is the same.
@user-cq1tg4ht7r
8 ай бұрын
hi gregor , I've been trying the p 3 for 2 weeks, I added the 2 plenum kit. I watched your videos to help me with the adjustments. for some reason mine is inconstant. shooting at 880 fps, every 10 shots or so, someone drops to 587 fps. this doesn't always happen.I don't understand why?I'm using jsb monster redesigned 5.5 - 25.39 . do you have an idea?
@gregorkamensek3923
8 ай бұрын
Hi. My first guess would be that you have the hammer spring tension set too low. Try to increase it for about 2 revolutions. Also, keep track of the regulator pressure. If this happens because of too low hammer spring tension, then it is highly likely that the pressure when that happens is slightly higher than with other shots that are the correct speed.
@user-cq1tg4ht7r
8 ай бұрын
@@gregorkamensek3923 thanks Gregor, I made your correction and now the problem is gone. I look forward to your next video on the p3 with all the best adjustments. best regards
@gregorkamensek3923
8 ай бұрын
@@user-cq1tg4ht7rHappy to hear that.
@RinaldoPraag
Жыл бұрын
I wonder if RTI will keep on producing the Priest 2 with the same upgrades that are made to the frame of the P3 such as the picatinny rail that can be angled and the new regulator. I love the Priest 2 and it's simplicity. It just works. I run mine with the LR barrel and it's a beast. My power figures are just as high as the Prophet 2 and it's extremely efficient with air.
@gregorkamensek3923
Жыл бұрын
They said that right now, the Priest 2 will stay as it is. But that might change in the future (so no answer to your question :)).
@RinaldoPraag
Жыл бұрын
@@gregorkamensek3923 Thanks for the feedback. I guess we'll see.
@geotra9177
Жыл бұрын
Nice video! What bipod is that?
@gregorkamensek3923
Жыл бұрын
it is Accu-Tac
@geotra9177
Жыл бұрын
@@gregorkamensek3923 thank you
@IRBent2
Жыл бұрын
What about weight, is it lighter than the P2 and if so, what's the weight? It looks a tad leaner than the P2. Not sure if I like the extra height on the scope rail. I think I'd prefer the P2 scope rail because it's closer to the barrel and still has enough MOA for my needs.
@gregorkamensek3923
Жыл бұрын
I don't have the exact weight of it but it is probably exactly the same as P2. Regarding scope height, I am kind of on your side. I do like the adjustability although the fixed 20 MOA was already great and I don't like high scopes, although they are quite often preferred with long range shooters...
@sonan7216
Жыл бұрын
The mount where the viewfinder goes comes with 20 moas, it can be left at 0 moas, thanks
@gregorkamensek3923
Жыл бұрын
Yes, the adjustable rail on P-3 can go down to 0 MOA.
@zaruan
7 ай бұрын
Hi Gregor, sorry to bother you but I have a question about the p3. I bought a p3. I don't know if this is normal but I noticed the following. for example: if I set the pressure regulator to 100 bar, then fill the tank to 300, I can notice that the exit speed of the projectile is never constant. As the tank empties, the velocity of the projectile drops. at 300 bar I will have 289 mts, at 250 I will have 270 mts, at 150 I will have 260 mts. this prevents me from having consistency in my shots, especially in benchrest. I mounted the 2 plenum upgrade on my p3. could they be the cause? or do you think everything is normal?to have more consistency I am forced to connect an additional cylinder to the rifle, which keeps the pressure always constant. What you think?
@gregorkamensek3923
7 ай бұрын
The plenum should not be the reason for this. Does you regulator operate correctly? Is the regulated pressure the same when you fill your bottle to 300 bars and when it is at 200 bars?
@zaruan
7 ай бұрын
@@gregorkamensek3923 the regulated pressure of the regulator is always stable and constant but the speed of the pellet in some stages is inconsistent. as I could see, the consistency is better from 210 to 190 bar of charge. I'm having a lot of trouble getting accuracy on benchrest. the most precise dot is monster redesigned. with slug you can't go to benchrest. If I can ask you for an email, I would like to be able to speak with you privately to get detailed advice.
@gregorkamensek3923
7 ай бұрын
@@zaruan What pellet weight are you using?
@zaruan
7 ай бұрын
@@gregorkamensek3923 JSB MONSTER REDESIGNED CAL. 5,5 1,645 G . Or slug knock out .216 .217
@andydowden8117
Жыл бұрын
We need this gun in sub 12 for uk immediately👍
@waynemiller2843
9 ай бұрын
Between the RTI P3 and the Huben KI. Which would be your preferred air rifle?
@gregorkamensek3923
9 ай бұрын
This is probably the most frequent question I give and by now, i think it deserves a video or "shorts" on its own...
@waynemiller2843
8 ай бұрын
@@gregorkamensek3923 I hope you do make a comparative video on the two platforms.
@mikewilliams1484
Жыл бұрын
What barrel is the P3 using , and what calibers with what barrels?
@gregorkamensek3923
Жыл бұрын
The barrel remained the same as on P2
@sonan7216
Жыл бұрын
Gracias Gregor tengo una de las primeras P2 estoy muy dolido con el resultado, el señor Rok me gustaria que me ayudase creo que deberia hacer algo por los que sufrimos el problema desde el primer momento, un saludo.
@gregorkamensek3923
Жыл бұрын
Hi. I would suggest that you contact RTI directly about the problem you are having. I am sure they will help you...
@bigearl8687
5 ай бұрын
Did you do a video on the 35 prophet
@gregorkamensek3923
5 ай бұрын
Not yet. As you can imagine, that rifle combination is still a prototype and I have to get confirmation form RTI if and when they intend to release it.
@xaviermartinez774
Жыл бұрын
I was saving up for a p2 but now this is out . if you could only buy one would it be the P3?
@gregorkamensek3923
Жыл бұрын
Yes, I would go for P-3 for sure.
@markhall7735
11 ай бұрын
Hello Gregor Can you tell me About rear power wheel. How to set it up correctly. Is it same like hammer adjustable on prophet 1. Do you have any video on this. Keep up good work
@gregorkamensek3923
11 ай бұрын
Pressure assisted valves are different. I have explained this in the video for P2, basically, you adjust the power only by pressure. The hammer spring need just to be adjusted to high enough tension to be able to open the valve at the highest pressure you intend to use. For lower pressures, you can leave the hammer spring tension as it is.
@darrenm7964
Жыл бұрын
Hopefully no assisted valve problems now was going for airmaks because of the prophet 2 problems, but maybe wait for the p3 to come out?? Who knows!
@stedyone1090
Жыл бұрын
Valve and reg on KRAIT recalled twice so we had to buy the HUMA regs for our KRAITS. Airmaks will never see our money again. Epic TWO seen at IWA on KZitem with Giles Aurgun 101 about 40 minutes into vid. Now that could be worth waiting for. But that's me
@anthonytnyz4123
Жыл бұрын
why hammer adjuster with assisted valve ? Hammer have not effect on my Uragan 2
@sonan7216
Жыл бұрын
Good morning, you can put the strip where the viewfinder of the p 3 is mounted to zero moas, thank you.
@gregorkamensek3923
Жыл бұрын
You mean like a red dot?
@sonan7216
Жыл бұрын
@@gregorkamensek3923 The mount where the viewfinder goes comes with 20 moas, it can be left at 0 moas, thanks
@sonan7216
Жыл бұрын
Good morning, what updates can be brought to prophet 2, thank you.
@gregorkamensek3923
Жыл бұрын
I will try to get some info about that but I doubt there would be much to bring as P3 is completely redesigned...
@andydowden8117
Жыл бұрын
Will this be available in sub 12 ft pounds for the guys in the uk!
@gregorkamensek3923
Жыл бұрын
I confident that it will be.
@thraplomongo6766
6 күн бұрын
Ambidixtross side liver must be installed also for a right or left handed......
@TheCraigy83
Жыл бұрын
what's the minimum needed psi per shot ? i cant get a straight answer from anyone regarding the actual psi work , i personally only use 70 - 80psi to get 400fps arrows from my homemade 10mm smooth bore air rifle...👍🏻
@gregorkamensek3923
Жыл бұрын
The reason why you don't get a straight answer is because no one is using the gun with such low pressure, it is not designed for it. Manufacturer states that it operates from 80 to 180 bars I believe. That is the operational pressure where the regulator works best. It is also the pressure where the valve and all the forces in the firing cycle are correctly balanced.
@TheCraigy83
Жыл бұрын
@@gregorkamensek3923 Thanks for replying m8 👍🏻
@timyd2009
11 ай бұрын
Iv got my p3 compact performance in the uk running 11.5ftlb in .22 on 105bar. But im pretty sure iv got restrictors in which is why reg is a tad high in my opinion. But it shoots very good 😀
@mattbeumer5274
Жыл бұрын
Hi Gregor, Great review. Any idea of a release date? Thanks, keep up the great work!
@gregorkamensek3923
Жыл бұрын
Hi. Yes, they will start shipping in April. Thanks :)
@CyberW1k1n6X3M
8 ай бұрын
Možes li preporuciti tu pusku? Dvoumim se između nje i FX Dynamic Expres
@gregorkamensek3923
8 ай бұрын
Ne mogu usporediti jer nisam pokušao FX Dynamic ali meni se P-3 sviđa...
@beres70
Жыл бұрын
Gregor, that weight bar will bend forever if you leave those weights on it. Anyway, I love your videos. Thank you.
@rickoshea8138
Жыл бұрын
I was think Gregor must be strong to lift those weights. I would start with just the small ones on the ends...
@gregorkamensek3923
Жыл бұрын
🤣😂
@TheCraigy83
Жыл бұрын
theres like 25kg on it i have the same weights 😂
@beres70
Жыл бұрын
@@TheCraigy83 No, it is exactly 92kg. Bar 12kg, 2x15kg, 4x10kg, 2x5kg as I see. 😊
@gregorkamensek3923
Жыл бұрын
@@TheCraigy83 Yeh, I made a mistake last time, it is total of 50 kg... 2x10kg + 4x5kg + 2x2,5kg + 5kg (bar). But the reason why it is bent is because the bar is made of 3 parts and is not a perfect fit on its joints. It also flexes a bit.
@CalonSniper
Жыл бұрын
rti is extraordinary
@gregorkamensek3923
Жыл бұрын
Yp
@jim69james84
8 ай бұрын
When is part 2 coming?
@gregorkamensek3923
8 ай бұрын
It is coming, just not sure when. Sorry. If there is any consolation, the performance is virtually the same as P2 with added plenum...
@gastondupuy1117
Жыл бұрын
Me entregaron el prophet 2 hace un mes y veo que tiene múltiples fallas de perdidas de la válvula de disparo. La marca se hará cargo de retirarlos del mercado y reemplazarlos???
@gregorkamensek3923
Жыл бұрын
Don't know, you will have to ask RTI...
@brendanmahaffey7886
11 ай бұрын
how about a tuning guide for the prophet 3?
@gregorkamensek3923
10 ай бұрын
Yeah, some day, cannot promise when... :(
@mrfishfreak66
5 ай бұрын
I bought a P3 in the states and noticed that my regular did not come with a bleedport on the regular. Is this normal? Should there be one??
@gregorkamensek3923
5 ай бұрын
That is normal. The revisions of the regulator are independent of the RTI rifle models...
@mrfishfreak66
5 ай бұрын
@gregorkamensek3923 ok, even if it supposed to the performance version?
@mrfishfreak66
5 ай бұрын
@gregorkamensek3923 it's supposed to be the performance one, so far, the ones that have it all have the one with the bleedport on the regular
@gregorkamensek3923
5 ай бұрын
@@mrfishfreak66If I understand correctly, the regulator does have two gauges and it is adjustable, but it does not have the bleed valve? If this is true, then it is the correct regulator of the performance P-3.
@mrfishfreak66
5 ай бұрын
@gregorkamensek3923 thank you. Just not sure why others have a bleed valve on their regular, and I dont. in all the videos I have watched they do too. But I believe you. Thank you for taking the time to answer my questions.
@TripleGRogerLait
Жыл бұрын
When is the part two my friend ?
@gregorkamensek3923
Жыл бұрын
Not sure exactly, first I intend to make a video about valve operation...
@TripleGRogerLait
Жыл бұрын
@@gregorkamensek3923 I really look forward to it buddy 👍
@khalidhassan9349
Жыл бұрын
Is that same barrel as prophet 2?
@gregorkamensek3923
Жыл бұрын
Yes
@ragotphilippeh6496
Жыл бұрын
Hi Gregor, thanks for your excellent videos. I have owned a Prophet Performance 1 for 2 years. I am very satisfied with it, it is an extremely reliable and robust weapon. I did not buy the version 2, because I found that the improvements were not sufficient .... I am happy to discover the modifications on the version 3. It is nevertheless regrettable that RTI does not propse a 100% slugs gun in 600 and 700mm ... maybe in the furur ? I was thinking of buying a Panthera because I want to shoot slugs between 150m and 250m... I'm looking forward to your next videos of this Prophet 3 shooting before I decide ... When will the Prophet 3 be available for sale ?
@gregorkamensek3923
Жыл бұрын
P-3 will be out in April 23. 700mm slug gun is also coming :)
@ragotphilippeh6496
Жыл бұрын
@@gregorkamensek3923 Thanks Gregor . Very good news, so I will wait for the 700mm slug gun . I hope you will have time to present it in one of your videos...Keep up the good work ....
@gregorkamensek3923
Жыл бұрын
@@ragotphilippeh6496 Of course... I am waiting for it as eagerly as you are :)
@heretoeternity3311
11 ай бұрын
What happened to Part 2?
@gregorkamensek3923
11 ай бұрын
I have excuses, but they are just excuses. The gun works excellent for me, regarding accuracy, it is the same as P2 as it uses the same RPB barrel... I will get to it eventually :(
@johnarmstrong6242
3 ай бұрын
Where is the bleed screw on the P3
@gregorkamensek3923
3 ай бұрын
When you remove the but pad rubber, you will see it under the hammer adjustment wheel.
@arthurnavarraiii605
Жыл бұрын
Gregor...do these barrels have polygonal rifling?
@gregorkamensek3923
Жыл бұрын
No, these are custom barrels made by LW for RTI called RPB (RTI proprietary barrel) with conventional rifling.
@metiu5239
Жыл бұрын
Hi Gregor, I wait for a video test and a video where you disassemble the P3
@gregorkamensek3923
Жыл бұрын
Coming.
@metiu5239
Жыл бұрын
@@gregorkamensek3923 Hi Gregor, do we have to wait much longer for the new video?? Come on, I'm super super curious!
@gregorkamensek3923
Жыл бұрын
@@metiu5239 I don't know when I will be able to make it. If you are interested in power, accuracy and efficiency, I can say that those things are absolutely the same as on P2, so you can check out those videos. Next video with P-3 will be about the valve operation...
@metiu5239
Жыл бұрын
Hi Gregor, I'm not interested at the power, but I would like to know the consistency of the P-3; moreover I would like you to explain in detail how the balanced valve works. Thank you
@gregorkamensek3923
Жыл бұрын
@@metiu5239 You will get these answers... Sorry if it takes so long for me to finish testing and make videos...
@ruslankuschnir2141
Жыл бұрын
Hi Can this rifle shoot 20grn in 177 caliber?
@gregorkamensek3923
Жыл бұрын
I haven't tried it yet, but I don't see any reason why it wouldn't. It definitely has enough power.
@ruslankuschnir2141
Жыл бұрын
I want to buy a rifle, but whether FX or RTI.? RTI is reliable? 177 k
@gregorkamensek3923
Жыл бұрын
@@ruslankuschnir2141 Hard question to answer. Any and every airgun has potential to have problems. In my experience, RTI is reliable. I cannot compare them simply because I am not using FX.
@user-jy2nz8st1j
10 ай бұрын
How much is the price
@gregorkamensek3923
10 ай бұрын
The MSRP is 1.399,00 €, but you should check with local retailer: www.rtiarms.eu/retailers
@bekupowiecbekupowski7058
Жыл бұрын
RTI ARMS Prophet 2 - that's leaking joke, not airgun. Never again RTI!
@Abo-Rawi
10 ай бұрын
the rifle is awsome but price wise in my country Saudi Arabia it's same as FX, urgan, Vulcan. so why i pay this much of money while i can get high end rifle. 1870 USD. nah
@Chris-vc1dh
8 ай бұрын
great, thinking of as 4,5mm but it is so expensive here...
@dazzerlee
9 ай бұрын
great video but keep waving the gun around back and forward very off putting for a good video stop waving the gun around be a bit more steady would be greatest video then
@gregorkamensek3923
9 ай бұрын
Thanks for the tip.
@atododrone6756
Ай бұрын
p3 the worst garbage I bought, bad trip valve, hammer breaks, bad pressure regulator, bad sidelever, rti must change all the engineering if you want to continue selling because they are a disaster
@icraumix
Жыл бұрын
Hello Gregor, I have a few questions about Huben K1. What is your email so that I can write it to you?
@Skilpadjie1
Жыл бұрын
when will Part 2 come out?
@gregorkamensek3923
Жыл бұрын
I am wokring on a valve operation video now... so I don't know. I assume you are interested in accuracy? The accuracy will be exactly the same as P2 as the barrel is the same.
Пікірлер: 173