@@IGame4Fun2 that’s why I always read specs and KZitem when it comes to builds.
@Yuki-xl1xg
Жыл бұрын
@@Blaquegold same
@fritz3051
Жыл бұрын
i just got my new gpu today, I was worried that the gpu will not fit in my prebuilt. In the end my gpu was 10 mm short to hitting the wall of the case
@okdarius
Жыл бұрын
Trust me, the anger is 10x worse when you're up at 12am trying to finish up the build and go to sleep to use it tomorrow and this shit happens
@rellt5498
Жыл бұрын
Go to sleep to use it the next day? Fuck that 4 cups of coffee and I’m on that shit all night and morning 😂
@JustKhari
Жыл бұрын
@@rellt5498 i remember all my parts arrived while i was at work and i spent the next 4 hours building it bc i couldnt find the parts box with screws and such (it was in the hard drive bay) and then after all that i sat and watched windows 11 slowly install from my boot drive. then slowly downloaded every browser and the games i wanted 😂 i was exhausted the next day but i didnt sleep a wink
@okdarius
Жыл бұрын
@@rellt5498 LMAO fair fair
@ImWateringPSUs
Жыл бұрын
Maaaaaan I’ve been there too, I remember on my first PCs I literally would fall asleep by pure exhaustion after 8 hours of work😅😂
@wizzenberry
Жыл бұрын
Takes me about 30 mins to build something water-cooled wtf are you doing to it?
@BigGuyBingo
Жыл бұрын
The monitor at the end makes the 4070 useless 💀
@i7583
Жыл бұрын
3070ti*
@ImWateringPSUs
Жыл бұрын
It was the old testing monitor I used on newly built PCs in my lab, if you check out the newer videos I’ve upgraded it!
@cutie6422
11 ай бұрын
Monitors only affect how it looks not how it feels you’ll feel the smoothness just not see it fully
@mr.lunatic3157
11 ай бұрын
@@cutie6422and this is just for testing as long as it can display something itll work 😂
@Worms_Pro
11 ай бұрын
@ImWateringPSUs So you have a "lab" but you can't build a PC to save your life?
@ARealPain
Жыл бұрын
He's gonna hate his life if he ever gets a 4080 or 4090.
@ImWateringPSUs
Жыл бұрын
😂😂😂 facts
@Kaffry
Жыл бұрын
I swear I thought about getting a 40 series, got a 3060 Ti, and it perfectly fit in my case. I thought I would have plenty of clearence but boy was I wrong.
@WhoSean1
Жыл бұрын
i went from a 1660 super to a 4080 i had to get a new case the graphics could fit but it was bumping one of the fans and i coulda barely put the glass panel back on 😭but i did have a rather weird case
@onlygoodreviews7812
Жыл бұрын
It's a mistake you don't make twice
@rodolfotsang4327
Жыл бұрын
So not all cases will fit a gpu?
@NLG_NeverLetGo
9 ай бұрын
Put the radiator above the cpu giving u just enough clearance
@fruhlering
7 ай бұрын
There’s no enough space on top
@NLG_NeverLetGo
7 ай бұрын
@@fruhlering newww caseee timeeee
@Rayray_unicornplayz567
7 ай бұрын
@@fruhleringThen just remove it.
@ImWateringPSUs
7 ай бұрын
Unfortunately the radiator wouldn’t fit on top due to the motherboard’s VRM heatsink interfering. But I simply switched to a 120mm AIO cooler mounted on the back and now everything is working fine!
@yaseryoyo
5 ай бұрын
360 radiator doesn't fit above
@DRURID
2 жыл бұрын
I can exchange your card with an 960 how's that for a deal. I promise it will fit in the tower.
@ImWateringPSUs
2 жыл бұрын
AHAHHAHAHAH, I think it will also run cooler and quieter lol
@Cpt.JohnPrice.
Жыл бұрын
@@ImWateringPSUs i would be impressed if it will run
@ImWateringPSUs
Жыл бұрын
@@Cpt.JohnPrice. Why? ahahah
@oldi184
Жыл бұрын
All his problems could have been avoided. Tape measure. Measure the graphics card. Measure the case. See if the card will fit. Done. Why didn't he do that? It would have taken 20 seconds.
@ImWateringPSUs
Жыл бұрын
@@oldi184 I like to live life on the edge
@benq994
Жыл бұрын
Moral of the story: don't buy tiny cases if you want some futureproofing..
@ImWateringPSUs
Жыл бұрын
That’s definitely true!
@fujibayashi2836
Жыл бұрын
More like : don't buy any AiO.
@LeadSails
Жыл бұрын
@@fujibayashi2836 nah its the case it’s way too small, and that’s not even a big gpu either, I have a 360mm aio in my case mid tower and was still able to fit a Suprim 4090 with a lot of extra clearance.
@fujibayashi2836
Жыл бұрын
@@LeadSails You know, without AiO this card would fit perfectly into this case.
@BlackWolfHB
Жыл бұрын
@@fujibayashi2836 na i have a 360mm aio in my Lian li o11 dynamic and a rtx 3080 aours master
@zantle100
Жыл бұрын
Buddy got the biggest card for the smallest pc case 😂
@ImWateringPSUs
Жыл бұрын
You have to see my Open Frame build on the channel, there the card is literally bigger than the case
@banga6419
Жыл бұрын
This is why you check things will fit before you buy it.
@ImWateringPSUs
Жыл бұрын
The case was actually listed as compatible with the length of the GPU and with the AIO on their website, but unfortunately they didn’t mean “at the same time” apparently. I build PCs for a living (check my channel for my various builds) so I always double check the specs! I ended up switching AIO, since the CPU is a locked i7 and a good 120mm AIO was plenty. Installed it at the back and now everything is working fine!
@Callamann
Жыл бұрын
@@ImWateringPSUsthats very unlucky
@Jeremy_CG
Жыл бұрын
@@ImWateringPSUs but wouldn’t it have been better to place the radiator on the top of the case?
@janandrosiuk352
Жыл бұрын
Look at the space on top, I think its not enough :/
@ikkyu_th
Жыл бұрын
Guve m
@Pcgamer20h
4 ай бұрын
Problem fix: put the radiator on the top.
@0range3263
Жыл бұрын
You know that feeling when you finish your build and you thought the plastic socket cover was the cpu
@ImWateringPSUs
Жыл бұрын
Man💀😂
@ryanespinoza7297
Жыл бұрын
I finished my build and cable routed 10 Corsair ML120 Elite RGB fans only to find I didnt take the plastic off the IO shield.
@DGscene
Жыл бұрын
That looks like a skill issue
@ImWateringPSUs
Жыл бұрын
The case was actually listed as compatible with the length of the GPU and with the AIO on their website, but unfortunately they didn’t mean “at the same time” apparently. I build PCs for a living (check my channel for my various builds) so I always double check the specs! I ended up switching AIO, since the CPU is a locked i7 and a good 120mm AIO was plenty. Installed it at the back and now everything is working fine!
@povyourdogfoodbadvideos4694
10 ай бұрын
I ain readin allat@@ImWateringPSUs
@fasionistaxx
9 ай бұрын
@@ImWateringPSUsthat’s good
@hiramvh
8 ай бұрын
@@ImWateringPSUs could've mounted the radiator on top...
@Clingysquire
7 ай бұрын
You having no friends sounds like a skill issue
@TokyoRobb
2 жыл бұрын
The biggest fear 😂 at least it's just the radiator and you can find ways around it haha
@ImWateringPSUs
2 жыл бұрын
Yay I ended up just switching to a 120mm Corsair AIO and mounting it at the back :)
@Forkinthemud
Жыл бұрын
@@ImWateringPSUs Not the top?
@jonallen1357
Жыл бұрын
When you realize SIZE really does MATTER
@ImWateringPSUs
Жыл бұрын
😂
@jonallen1357
Жыл бұрын
@@DebayanOPthe meaning behind the joke: if you don't know ask your parents..your obviously not meant to understand what you don't know now....the surface: it's a pc builder thing..always double check your dimensions to make sure you're case is big enough for added accessories and parts...DUH
@joankamberaj
Жыл бұрын
It does. If the case was bigger :)
@DebayanOP
Жыл бұрын
@@jonallen1357 okay
@Ilikegamesandvr
Ай бұрын
Maybe temporarily place the radiator at the top, it's not optimal but it'll work
@uknavi6958
Жыл бұрын
Firstly put that radiator up at the top as an outlet, secondly stick some massive fans on the front to cool that card and board down like a champ
@xxmeanyheadxx
Жыл бұрын
we all know heat moves sideways
@uknavi6958
Жыл бұрын
@@xxmeanyheadxx actually heat rises, two factors are conduction and convection, many wanna check out Jayz2cents about radiators he gives a very good lesson on it. But don’t worry I’ve only been building rigs since dial up internet so who am I to tell you your wrong
@xxmeanyheadxx
Жыл бұрын
@@uknavi6958 i forgot the /s........
@ImWateringPSUs
Жыл бұрын
Unfortunately the radiator wouldn’t fit on top due to the motherboard’s VRM heatsink interfering. But I simply switched to a 120mm AIO cooler mounted on the back and now everything is working fine!
@mrjoecharles
Жыл бұрын
@@xxmeanyheadxx heat rising is pretty much negligent when you add in fans lol. yes, heat rises, anyone with an internet connection can google it to confirm, however when you introduce multiple fans in a sealed case, and actually set your airflow right, the heat will move any way you want it to lol
@Ryuketsu28
14 күн бұрын
That’s why you should always check your case’s compatibility
@NikesOnMaFeet95
Жыл бұрын
Literally just experienced this with the 4080 not fitting inside my case :(
@ImWateringPSUs
Жыл бұрын
Maaaaann I feel you, I hope you managed to make it fit in the end!
@NikesOnMaFeet95
Жыл бұрын
@@ImWateringPSUs Had to get another case unfortunately. But all good now!
@Dreamlink91
Жыл бұрын
When you do shit yourself without doing a homework first 🫠
@ImWateringPSUs
Жыл бұрын
😂😂😂
@GD_Cheezy
Жыл бұрын
put the radiator on the top vent its gonna be better for the radiator and ur gonna have space for the 3070
@ImWateringPSUs
Жыл бұрын
That was my original plan, but unfortunately the motherboard’s heatsink was interfering and that wasn’t possible😔
@UnexplainedHoveringSpheroid
Жыл бұрын
Move your radiator to the top. Also, check whether parts will fit in your setup before ordering them.
@ImWateringPSUs
Жыл бұрын
Unfortunately the radiator wouldn’t fit on top due to the motherboard’s VRM heatsink interfering. But I simply switched to a 120mm AIO cooler mounted on the back and now everything is working fine!
@Dosyboy287
Ай бұрын
Bro you can buy a gpu to motherboard cable and buy a stand for your 3070Ti
@xerxestheii856
Жыл бұрын
hey hey easy on the damn gpu!
@ImWateringPSUs
Жыл бұрын
No worries they're pretty sturdy ahaha
@kleinfeicht
10 ай бұрын
Solution Mount watercooler at top (seems to not fit) Or just buy a cheap air cooler does 95% a better job especially since they are cheaper and quiter
@ImWateringPSUs
9 ай бұрын
Unfortunately the radiator wouldn’t fit on top due to the motherboard’s VRM heatsink interfering. But I simply switched to a 120mm AIO cooler mounted on the back and now everything is working fine!
@Lochlany
2 ай бұрын
ik this was a year ago but theres a simple fix just take off the fans from the case put the gpu in put the fans back on and it would fit because the gpu goes slightly back when in
@Hipsters11
2 ай бұрын
Experienced this pain just few days ago. I had to get another case. Old case was Cooler master SL600M which I really love but had to upgrade because RTX 3080 wouldn’t fit
@ewenblack4174
4 ай бұрын
Nope…that’s why they invented tape measures
@alexandervowles3518
3 ай бұрын
I could visually estimate that it wasn't going to fit 😭
@Iammentelyunstable
Ай бұрын
Tip: sell it and get a founders edition it’s smaller
@AP_GAMingYTOFFICIAL
Ай бұрын
Dont need to buy a separate case u can buy a small headsink and heat pipe or that cooler which cools the actual gpu board online for cheaper and change the board to that cooler then fit it inside
@snowpaletehdog
Жыл бұрын
You know that feeling when you don't plan your build properly and get a case that's to small
@ImWateringPSUs
Жыл бұрын
The case was actually listed as compatible with the length of the GPU and with the AIO on their website, but unfortunately they didn’t mean “at the same time” apparently. I build PCs for a living (check my channel for my various builds) so I always double check the specs! I ended up switching AIO, since the CPU is a locked i7 and a good 120mm AIO was plenty. Installed it at the back and now everything is working fine!
@final2k565
4 ай бұрын
Blud has never heard of a top mount, which is also better for the aio
@darksideme-o2x
12 күн бұрын
*Relocate your aio water cooler radiator into above the case*
@creativewild
Жыл бұрын
Its the feeling of someone who did not really checked clearance or even the case it was using to see if the components would actually fit, specially on larger cards...
@ImWateringPSUs
Жыл бұрын
The case was actually listed as compatible with the length of the GPU and with the AIO on their website, but unfortunately they didn’t mean “at the same time” apparently. I build PCs for a living (check my channel for my various builds) so I always double check the specs! I ended up switching AIO, since the CPU is a locked i7 and a good 120mm AIO was plenty. Installed it at the back and now everything is working fine!
@kylebrown7968
3 ай бұрын
This is why I just got a massive case. I went with a 4060 but I could fit a 4090 for sure.
@nothing12299
Жыл бұрын
The liquid cooler's radiator plays a vital role in not allowing the gpu to fit 😂
@ImWateringPSUs
Жыл бұрын
Facts! Had to change to a 120mm one’
@nothing12299
Жыл бұрын
@@ImWateringPSUs 🤣
@djedi0709
3 ай бұрын
He got lots of interaction from the bit tho lmao (he later but the heat sink on the top cause there was room there.)
@Pezy_4584
Жыл бұрын
Moving the aio to the top seems like it woulda fit
@ImWateringPSUs
Жыл бұрын
Unfortunately the radiator wouldn’t fit on top due to the motherboard’s VRM heatsink interfering. But I simply switched to a 120mm AIO cooler mounted on the back and now everything is working fine!
@fissalwasonline3944
3 ай бұрын
You could just mount the radiator on top and I think you’d be good to go
@fr4ctalz638
5 ай бұрын
Put the GPU first, and then the radiator. Fixed the same prob. i had with a 500$ rx 6800
@weekly860
8 ай бұрын
Why put the radiator at the front then? just hook it to the top and link a couple (or few) replacement fans and you’ll have a better solution
@ImWateringPSUs
7 ай бұрын
Unfortunately the radiator wouldn’t fit on top due to the motherboard’s VRM heatsink interfering. But I simply switched to a 120mm AIO cooler mounted on the back and now everything is working fine!
@krishji
25 күн бұрын
Get a h5 flow rgb it’s 80 bucks and u can save money by not buying fans and u can mount your aio up the top it supports 280mm aios and under and the case looks clean
@SebTheamazing
2 ай бұрын
Should’ve put the radiator up top then? Whats that space for dust collecting?
@PaPaPIG653
3 ай бұрын
Thats why i always go for the atx tower cases more advantages when it comes to upgrades .
@manestguy
8 ай бұрын
2 things 1 never put in a gpu while it is on the 2 it is the medal bar one it will usually fit your gpu no matter what i just depends on space
@ImWateringPSUs
6 ай бұрын
Pcie is actually hot-pluggable
@theorphanobliterator
7 ай бұрын
you know, no I've never had that because i check to make sure the GPU fits before i buy a case
@ImWateringPSUs
7 ай бұрын
The case was actually listed as compatible with the length of the GPU and with the AIO on their website, but unfortunately they didn’t mean “at the same time” apparently. I build PCs for a living (check my channel for my various builds) so I always double check the specs! I ended up switching AIO, since the CPU is a locked i7 and a good 120mm AIO was plenty. Installed it at the back and now everything is working fine!
@WilliamHollinger2019
7 ай бұрын
I understand being a amateur I would do moved the rad then put the gpu in first. Put the rad back in.
@ImWateringPSUs
6 ай бұрын
I actually build PCs for a living, check the channel👀
@Tsusday
12 күн бұрын
I nearly had the same experience with my RX 7900XT, I'm now an air bender, my ssd's and drives are now free floating inside my pc.
@wilsonguy4952
6 ай бұрын
Mindblowing idea mount the radiator on the top
@ImWateringPSUs
6 ай бұрын
Unfortunately the radiator wouldn’t fit on top due to the motherboard’s VRM heatsink interfering. But I simply switched to a 120mm AIO cooler mounted on the back and now everything is working fine!
@Paid2Eazyy
7 ай бұрын
it’s called disconnect the water cooler lines first 😂
@ImWateringPSUs
7 ай бұрын
What😂
@obertflare7496
4 ай бұрын
Change the radiator position on the top of case might solve the problem
@justcynical6590
6 ай бұрын
Ur fault u bought a small boy case 😭
@BALONEYK--CZE-
11 ай бұрын
If i was that mad, I would just put the entire thing on top of cardboard and use it for years until i bought a house size case to prevent that from happening ever again, thats what happened last time when i cut my hand on a crappy case.
@ImWateringPSUs
11 ай бұрын
AHWGWHWHAHA a bit drastic but understandable! Here I managed to make it work by swapping AIO
@jt3000o
Жыл бұрын
You know that feeling when you didn't take the time to know how big your case was before you bought it
@ImWateringPSUs
Жыл бұрын
The case was actually listed as compatible with the length of the GPU and with the AIO on their website, but unfortunately they didn’t mean “at the same time” apparently. I build PCs for a living (check my channel for my various builds) so I always double check the specs! I ended up switching AIO, since the CPU is a locked i7 and a good 120mm AIO was plenty. Installed it at the back and now everything is working fine!
@DeathSong
4 ай бұрын
move rad to front. issue resolved
@Eagle_Bro11
4 ай бұрын
Just put the aio radiotor on the top and it will fit!!
@HyperGamingTW
2 ай бұрын
Mount the rad at the top
@jamesm7072
7 ай бұрын
i know you weren’t gonna put it in but there’s something that felt weird about you trying to put the graphics card in with the power on
@ImWateringPSUs
6 ай бұрын
😂😂😂 but pcie is actually hot pluggable!
@Green_House7
10 ай бұрын
Back in the days when RTX 3080 launched most of them are Triple fans there are some 3080s with dual fans but I don't see them much often but for 4070 we do have dual fan 4070 from Msi and Asus so hopefully when Nvidia launch rtx 5000 series in the future I do hope there will be more Dual fan gpus don't get me wrong I love triple fans gpu but me specifically like compact matx builds so I would usually prefer dual fan gpu Even if I have to pick 4090 I would go with FE 4090 (Purely my personal preferences)
@ImWateringPSUs
9 ай бұрын
Yesss agreed!
@jayfuckedyamom
8 ай бұрын
When you put the radiator on the side and not the top is the problem 😂😂😂😂😂 im surprised it turns on
@ImWateringPSUs
7 ай бұрын
Unfortunately the radiator wouldn’t fit on top due to the motherboard’s VRM heatsink interfering. But I simply switched to a 120mm AIO cooler mounted on the back and now everything is working fine!
@Kotatko_zsg
7 ай бұрын
Put the water cooling fans on the top as I see there is a supported mount for that and then it should fit 💀
@ImWateringPSUs
7 ай бұрын
Unfortunately the radiator wouldn’t fit on top due to the motherboard’s VRM heatsink interfering. But I simply switched to a 120mm AIO cooler mounted on the back and now everything is working fine!
@dlbutters7164
Жыл бұрын
Oh, she can take it... She can take it like a BIG GURL... DO IT!!!
@ImWateringPSUs
Жыл бұрын
😂😂😂
@Rychuxd
3 ай бұрын
Well, you dont need a case
@genericguitarist8489
Ай бұрын
Put the radiator up top!
@TwoCapz
5 ай бұрын
Bro bought a strix (360mm) and he's now realising
@MaskmanGaming69
10 ай бұрын
Yo the moniter needs no updates ngl 😅😅
@ImWateringPSUs
10 ай бұрын
It was the old testing monitor I used on newly built PCs in my lab, if you check out the newer videos I’ve upgraded it!🫡
@MaskmanGaming69
9 ай бұрын
@@ImWateringPSUsok bro😅
@NowLedgeOutpost
Ай бұрын
Just get rid of that radiator instead of bitching, more GPU power anytime over those overkill rads.
@lil3mmar54
7 ай бұрын
U can fit it softly with angled
@ImWateringPSUs
6 ай бұрын
Unfortunately even like that it wouldn’t fit, but I ended up switching AIO, since the CPU is a locked i7 and a good 120mm AIO was plenty. Installed it at the back and now everything is working fine!
@cyberzennx478
Жыл бұрын
I can understand the frustration of this man. But this is why i measure everything before buying and building .
@ImWateringPSUs
Жыл бұрын
The case was actually listed as compatible with the length of the GPU and with the AIO on their website, but unfortunately they didn’t mean “at the same time” apparently. I build PCs for a living (check my channel for my various builds) so I always double check the specs! I ended up switching AIO, since the CPU is a locked i7 and a good 120mm AIO was plenty. Installed it at the back and now everything is working fine!
@cyberzennx478
Жыл бұрын
@@ImWateringPSUs I allso had an online shop and a liddle store for custom builds . But since due to inflation and covid at the time we had to shut down. Becouse renting a building while in lockdown and not having custommers is an expensive way to lose money lol . But i allso dry fit the case where i'm building in just to prevent this from happening . But i'm happy at least its working now with the 120 mm aio , and you can keep the other 240 mm for a difrend project for a nother custommer . greetings cyber .
@lucaverde126
Ай бұрын
If only he got a ryzen 4070 instead
@elliotchong-green284
4 ай бұрын
Mount the air fan and rad on the top and should fit
@NekoCat0o
16 күн бұрын
Well you can put your radiator at the top right?
@connor0323
3 ай бұрын
Get better case bucko, always get ur dimensions before u order parts too
@Zenki326p
3 ай бұрын
Brother needs a bigger case I don’t understand sub atx size cases
@OLLI6867
7 ай бұрын
Remember. RGB gives you more FPS.
@ImWateringPSUs
6 ай бұрын
This is facts. To this day I only build my PCs around RGB😩
@alizahouani9260
7 күн бұрын
Change the radiator up
@debjitmondal4642
11 ай бұрын
You need to open the cabinet filter glass door. Then you can put it
@ImWateringPSUs
11 ай бұрын
Well without putting back the front panel yes
@iz_gutz
7 ай бұрын
bro just put it on the top
@ImWateringPSUs
6 ай бұрын
Unfortunately the radiator wouldn’t fit on top due to the motherboard’s VRM heatsink interfering. But I simply switched to a 120mm AIO cooler mounted on the back and now everything is working fine!
@GobbleThaShizznut1163
10 ай бұрын
Putting the radiator on the outside with the fans-
@ImWateringPSUs
9 ай бұрын
That’s actually a good idea😂
@giuliodeangelis1957
7 ай бұрын
There’s nothing a hammer can’t fix
@ImWateringPSUs
6 ай бұрын
😂😂😂
@lordgrey3749
7 ай бұрын
This is why I always buy full tower cases
@ImWateringPSUs
7 ай бұрын
The case was actually listed as compatible with the length of the GPU and with the AIO on their website, but unfortunately they didn’t mean “at the same time” apparently. I build PCs for a living (check my channel for my various builds) so I always double check the specs! I ended up switching AIO, since the CPU is a locked i7 and a good 120mm AIO was plenty. Installed it at the back and now everything is working fine!
@Gab2456_
2 ай бұрын
Just connect the rad In the top and it should fit lol
@RA2009.
Жыл бұрын
Bros gonna need another case
@ImWateringPSUs
Жыл бұрын
Getting a big case makes thing easier and it’s usually good for the long term. Agreed!
@jaxdominick3065
3 ай бұрын
He sounds like gru from Despicable Me
@bukva8888
2 ай бұрын
Bro hadn’t made sure there is enough space in the case and paid for it, literally :|
@carllundgren9241
5 ай бұрын
Move rad to the roof, smooth skull.
@WubWubWub
Жыл бұрын
You didn’t check before you started? I just bought my 3060 and the specs of my mid tower case said it would fit and it barely does. My fans are pre installed too which made it that much easier for me to check lmao
@ImWateringPSUs
Жыл бұрын
The case was actually listed as compatible with the length of the GPU and with the AIO on their website, but unfortunately they didn’t mean “at the same time” apparently. I build PCs for a living (check my channel for my various builds) so I always double check the specs! I ended up switching AIO, since the CPU is a locked i7 and a good 120mm AIO was plenty. Installed it at the back and now everything is working fine!
@literalvrplays882
2 ай бұрын
Put the radiator on top or get a new case it’s easy 👍
@b-metalfreak4911
10 күн бұрын
Got a 3070 and a bunch of RGG extension cables.... But went cheap on a case lol
@BenGameBG
9 ай бұрын
This is why you should check the dimensions (before) purchase
@ImWateringPSUs
9 ай бұрын
The case was actually listed as compatible with the length of the GPU and with the AIO on their website, but unfortunately they didn’t mean “at the same time” apparently. I build PCs for a living (check my channel for my various builds) so I always double check the specs! I ended up switching AIO, since the CPU is a locked i7 and a good 120mm AIO was plenty. Installed it at the back and now everything is working fine!
@Stronkxdude
4 ай бұрын
lil bro thought it was gonna fit into that shitty case
@liamsmall-yx1qm
Ай бұрын
The monitor 😭
@ytshortsrealization
11 ай бұрын
Dude I feel you! My 3080 broke so I bought a new amd 79000xt. Radiator made it not fit but I took an exhaust fan out and wiggled it in from an angle. 1mm bigger and I would be royally SCREWED
@ImWateringPSUs
11 ай бұрын
Maaaan I’m glad you managed to make it fit!
@Owen_1587
9 күн бұрын
Fax bro, put the radiator on the top
@thebestkinds1g
10 ай бұрын
Maybe you can use thinner fans on your rad?
@ImWateringPSUs
9 ай бұрын
Good advice! Unfortunately the fitting was too much off
@wolf-pack-_-0845
11 ай бұрын
Moving radiator to top seems like easy fix
@ImWateringPSUs
10 ай бұрын
Unfortunately the radiator wouldn’t fit on top due to the motherboard’s VRM heatsink interfering. But I simply switched to a 120mm AIO cooler mounted on the back and now everything is working fine!
@evp159
Жыл бұрын
I knew he was pissed when he jsut started jamming it in there 😢
@ImWateringPSUs
Жыл бұрын
😅 I kinda was
@TtotheCizzel
2 ай бұрын
Invest in a hacksaw and/or measuring tape
@NoZ6259
6 ай бұрын
This water cooling 😂
@ERENYEAGER-sw9ki
Жыл бұрын
That potato monitor lmao,btw the case looks pretty sick what it's called?
Пікірлер: 8 М.