"Part 1" How to run a CarPlay port to the upper dash. Plus taping into the in-dash 12V and running 2 USB plugs to the upper dash as well, in my Jeep Wrangler Rubicon.
I didn't like how all the charger wires were hanging all over the place, so I search for a solution. That's when I found this way of running car play as well as additional USB ports to the upper dash, that allows me to plug my stuff right in the upper dash and not have cables dangling everywhere.
Parts List
----------------------------------------------------------------------------
For CarPlay:
1) amzn.to/3OlkTUw
2) amzn.to/3DLAxnn
3) amzn.to/44W0cFF (3 Pack but you only need 1. I could not find just 1)
4) amzn.to/451euFm (another may work but this one was proven multiple times)
5) amzn.to/44brebf
For Extra USBs:
1) amzn.to/3YiLbLT 2 USB Socket: (Others should work, this is the one I used)
2) amzn.to/3Oj9l4h Posi-Taps: (Will work with the socket I used. If you go with another, make sure to get the Posi-Tap for the correct gauge wire)
Timecodes
0:00 - Intro
1:03 - Disconnecting the Battery
1:35 - Disassembling the Center Dash
6:05 - Prepping the Upper Dash
8:07 - Schematics
8:26 - Plugging Everything In
9:30 - Reassembly
12:12 - Tapping the 12V Socket
15:10 - Final Reassembly
19:14 - Reconnecting the Battery
19:47 - Final Result
Негізгі бет Running CarPlay to Jeep’s Upper Dash + 2 more USBs
No video
Пікірлер: 54