A few hours later the neighbours are lining up with their bats.
@realspartangaming4517
4 ай бұрын
I’ll never forget how loud those things are
@MARVG107
7 күн бұрын
😂😂😂😂😂😂😂🎉😂
@lukeboyer4071
11 ай бұрын
two fucking words NAVY GEL 😂 shit is the best thing ever just spray the loose stuff off with a good pressure washer then put the navy gel and it eats the rust away then you can wash it off and repaint
@A_barrel
10 ай бұрын
Rust-Oleum or is there other stuff?
@jonathanibanez6779
10 ай бұрын
Loctite naval gel that's what he was referring to
@damiansmith5322
2 ай бұрын
I've been using corroseal and it works great
@frankhughes9137
10 ай бұрын
I wire brush rust with every brake job. (3 -4) years, then rustoleam. Frame outlasts body.
@charliedc2A
11 ай бұрын
Never rubberized under coat. Oil under coat. Surface shield or fluid film.
@garagegrunt8154
11 ай бұрын
Thats the factory rubberized undercoating. Oil undercoating and fluid film are garbage, wouldn't hold up the first 2 weeks of plowing. I'm trying Eastwood's product this time around.
@ViperMods_216
11 ай бұрын
@@garagegrunt8154it holds up for years up here in Ohio
@paulrademacher
10 ай бұрын
@@garagegrunt8154a cosmoline or rubberized undercoating will literally cause more rust if you spray it over any amount of rust. Oil doesn’t
@garagegrunt8154
10 ай бұрын
@@paulrademacher Rubberized coating will, Cosmoline will not as its oil based. However, I am not using either of those for undercoating.
@toomanytododge2594
9 ай бұрын
Never undercoat a vehicle it will rot out 10x faster use an oil based spray
@pwest3732
10 ай бұрын
50-50 mix oil and diesel fuel sprayed with a garden sprayer. Old northern Maine trick. Once a year.
@danhewitt1984
11 ай бұрын
Except when i end up with vibration white finger carpel tunnel and raynards and yes this was all caused by a needler
@WillSwingem
11 ай бұрын
Sounds like you have baby hands
@jerryjeromehawkins1712
11 ай бұрын
@@WillSwingemNope. Sounds more like a Man who has made a living working with his hands.
@specialopsdave
10 ай бұрын
Sounds like you don't know when to stop and give your hands a break. I have an old string trimmer that will do the same thing if you don't rest your hands every 10 minutes
@danhewitt1984
10 ай бұрын
@@jerryjeromehawkins1712 thank you your right
@danhewitt1984
10 ай бұрын
@@specialopsdave I had no choice where I was working we were forced to use them up to 9 hours a day over a 12 hour shift 5 to 6 days a week.
@deanwoolston4794
11 ай бұрын
Clean off the rust, then prime and paint it with Rustolium, is a better solution. I painted cars, trucks, and all types of equipment, for over 40 years.
@ranblank1970
10 ай бұрын
What about the inside of the frame
@camoadam9880
11 ай бұрын
This is super handy info
@nahbruv3621
10 ай бұрын
Oil oil oil Unless it's garaged
@dolphincliffs8864
11 ай бұрын
We have two,bought one for school and one for the shop. Peen those welds!
@diji5071
11 ай бұрын
I always like to do it on a hot day let the moisture bleed out of the material before sealing it up for good.
@XroorX
10 ай бұрын
Phosphoric acid is cheaper and works well too.
@davidrogers5180
11 ай бұрын
Or just spray it with used motor oil. It'll just soak into anything
@thisisyourcaptainspeaking2259
11 ай бұрын
Yes!
@garagegrunt8154
11 ай бұрын
You can certainly get away with that in warmer states. I am going with Eastwood product this time.
@robertpsotka3525
11 ай бұрын
Bought a 12 pak of Fluid Film and spray my truck every fall. 2019 GMC and zero frame rust. Do it the first year right away
@Anthonydemone
16 күн бұрын
How bout just that regular ole oscillating tool with the flat blade fitting❓️
@garagegrunt8154
16 күн бұрын
I haven’t tried that, but this needle scaler can get into any nook and cranny that’s under the car.
@Pedroisanickname
10 ай бұрын
And wear a effing mask!
@chrisjones6002
11 ай бұрын
I just bought one. Im going to be putting a truck bed crane on my flatbed and needed something to help clean it up so i can add some reinforcement.
@AceWolff
11 ай бұрын
Bro bought an industrial tattoo gun
@ViperMods_216
11 ай бұрын
Use oil not undercoat
@shaunshepherd9097
9 ай бұрын
Yes you never saw a rusty sump
@Ralph822
11 ай бұрын
What’s wrong with scotch brite?
@alsnowski2769
11 ай бұрын
Hope you fix that Crack in the frame before you paint it.
@garagegrunt8154
11 ай бұрын
Frame is solid, that a weld you're referring to.
@maryangozdziewski8129
11 ай бұрын
Don't undercoat, it just seals in moisture and "wham" rust begins and you can't it because it's undercoated. There are other options. Check the web ..
@garagegrunt8154
11 ай бұрын
You may be thinking of only rubberized undercoating, there are dozens of different ones. For this truck I'm doing Eastwood's product.
@jamesedgar5944
11 ай бұрын
Im guessing you looked that up 🎉
@oliver_klozoff
11 ай бұрын
Fluid film baby
@deanwoolston4794
11 ай бұрын
Exactly
@travis2893
10 ай бұрын
Dry areas don't need to worry about this
@h0man512
11 ай бұрын
It would eat my car
@audiotestchanneltm
11 ай бұрын
😂
@89gt5.0
10 ай бұрын
Por 15 done
@ozoneswiftak
10 ай бұрын
grind, naval jelly, . under coat
@karrpilot7092
11 ай бұрын
The time and place to undercoat the vehicle is when it's new, at the time of purchase. Doing it after the rust has already started, is a waste of time and money. You're just covering it up.
@garagegrunt8154
11 ай бұрын
Thanks for the comment, what’s your experience with rust removal and undercoating a used vehicle?
@karrpilot7092
11 ай бұрын
@@garagegrunt8154 I never did. I have seen far too many instances where it was applied after the fact, and the coatings basically trapped the rust in under it.
@garagegrunt8154
11 ай бұрын
@@karrpilot7092 there are undercoatings then there are encapsulators. Encapsulators react with rust and create a coating while the traditional undercoats adhere to metal and keep water/salt out. Neither last forever, but you absolutely can recoat after rust appears with correct product.
@davidrogers5180
11 ай бұрын
Time for a used oil bath! Spray it on!
@thisisyourcaptainspeaking2259
11 ай бұрын
@@davidrogers5180Have you tried boiled linsead oil?
@jasonowen4073
9 ай бұрын
And then rust bullet
@sonmydful
11 ай бұрын
you need to have a high enough cfm/ large enough compressor requirement for the scaler otherwise its just gonna keep cutting out on you
@garagegrunt8154
11 ай бұрын
This is true, the smaller scaler isn't as demanding as the larger one. You can get away with a fairly small compressor running this scaler which most homeowners should have.
@mybetterhalf6373
11 ай бұрын
😴
@n.b.p.davenport7066
11 ай бұрын
A few days later
@garagegrunt8154
11 ай бұрын
3 days to be exact....
@thomasblais7751
11 ай бұрын
Cap
@jessiecochran5172
11 ай бұрын
That's not even real rust
@tonyhammer3588
11 ай бұрын
As a guy who has been in the Autobody business for over 40 years. YEAH, THATS NOT HOW ITS DONE.
@oof578
11 ай бұрын
I tried using a needler on mine, ended up just using an angle grinder with a wire wheel
Пікірлер: 77