Finally because od your incredible build i found out that Arctic freezer III 360 will fit in h6 flow
@KEVIN.44
6 ай бұрын
How
@Stephan-sPCCorner
6 ай бұрын
Yes it fits! The only problem was the motherboard which is a millimeter to big because of the decoration cover on the left side at the rear panel which touches the radiator. Hence i was only able to use the middle screw holes of the radiator. You will Not have such a problem with motherboards with a smaller cover.
@KEVIN.44
6 ай бұрын
@@Stephan-sPCCornerWill the MSI B650 GAMING PLUS WIFI work?
@Stephan-sPCCorner
6 ай бұрын
@KEVIN.44 I can not say for sure. The decoration cover from the MSI MEG X570 Unifyis is quite big. I assume that the decoration covers of other motherboards are a little bit smaller. We are talking about 1mm space. So basically i assume that there will be no problem with other motherboards. Ultimately i had also no problems, i just wasn‘t able to use the left screw holes from the radiator.
@YavuzTheIntern
4 ай бұрын
@Stephan-sPCCorner you mean the top middle part next to the io?
@itsamememario545
Ай бұрын
Hey thanks for showing this build! You answered exactly what I was looking for. However I think it's worth noting that at 2:50 we can see you had to angle the radiator so it wouldn't hit the motherboard, which is also why you could only use the middle screws. That would drive me absolutely crazy but still good to know that with some compromize it will fit
@Stephan-sPCCorner
Ай бұрын
Thank you for your comment! Yes indeed, that way is probably not a compromise for everyone. I think a motherboard with a smaller i/o shield should fit. As you can see in my post, it is only a millimeter which causes this problem kzitem.infoUgkxqnt_xP70bNTnZNkdvKAeK9QdGvenlUTs?si=_upeVDfgGmgvBH9_
@YavuzTheIntern
4 ай бұрын
My man, you are so lucky. Most of the views came to see if Liquid Freezer III 360mm fits in H6 flow (me included). PCPP shows them as invompatible. I saw that you said mobo cover was causing trouble. Do you mean the one on the top middle, next to the io and on top of the cpu socket?
@Stephan-sPCCorner
4 ай бұрын
Thank you for your comment! I mean the cover on the left, above the I/O ports. ( grabcad.com/library/motherboard-i-o-cover-1 This example cover is that what i mean) The radiator touches the cover. It is round about 1mm too far forward. Hence i was only able to tighten the middle holes
@DizConnected
6 ай бұрын
Nice build
@Stephan-sPCCorner
6 ай бұрын
Thanks!
@mirnav3709
Күн бұрын
Trimming may help. I also have a B650 Tomahawk, I will try to install the third fan by filing it a little. Or should i do it like you? Is it going to be problem if i trim it? Or is there any problem with 4 screws?
@Stephan-sPCCorner
21 сағат бұрын
So, we had no problems with 4 screws yet. This build is now running since 6 month without any issues. The radiator holds up well. So if this is an option for you, i would try first the variant with 4 screws. If it is not the result you expect, then filing the edge of a fan might be an alternative.
@jxlhc3817
4 күн бұрын
hi nice build, i love my h6 flow and need aio for my case, the nzxt alternative aio costs 200 more so the arctic is a no brainer, would you recomend a motherboard with no left decoration at all for it to fit better?
@Stephan-sPCCorner
3 күн бұрын
Hi, Thank you for your comment! It is not easy to say and depends on the platform you gonna use. AMD with AM4, AM5 or Intel with LGA1700 ? Asus Prime boards B550/X570-P might fit. Also TUF boards B650 / X670E or B760(Intel) But i cannot say for sure.
@Kirill17
2 ай бұрын
Hello could you clarify how hard was it to install a lf 3 360mm radiator and how much it hit up against the heatsink/mb. Woukd you have been able to shift it to the left/side a bit more so it was away from the motherboard and it still works?
@Stephan-sPCCorner
2 ай бұрын
@@Kirill17 i just posted some pictures. kzitem.infoUgkxqnt_xP70bNTnZNkdvKAeK9QdGvenlUTs?si=_upeVDfgGmgvBH9_ The length was not the problem. I was only able to use the screw holes in the middle.
@purrple0
5 күн бұрын
Anyone know the heatsink thickness of the mobo in this vid? I’m trying to know if this would fit with another board and just need the measurements
@Bubert94
6 ай бұрын
Do you think I could squeeze a gigabyte z790 aorus pro x ddr5 in there with this cooling top mounted like you?
@Stephan-sPCCorner
6 ай бұрын
Hi Bubert94, I can not say for sure. The decoration cover from the MSI MEG X570 Unify is really big. I assume that the decoration covers of other motherboards are a little bit smaller. We are talking about 1mm space. So basically i assume that there will be no problem with other motherboards but i also don’t know all motherboards. Ultimately i can say i had „actually“ no problems, i just wasn‘t able to use the left and right screw holes from the radiator. I haven‘t seen a z790 aorus pro x in real life yet, only pictures. It looks like the decoration cover is a little bit smaller. So i would assume that you will have no problems.
@Bubert94
6 ай бұрын
Ok, thank you very much! Btw just so you know you made a magnificent build!
@huggingugdy5718
4 ай бұрын
@@Bubert94is it fine with u now?
@huggingugdy5718
4 ай бұрын
Do you think i could squeeze a gigabyte z790 ud ac in there with this cooling?
@Stephan-sPCCorner
3 ай бұрын
I cannot say for sure, i don’t know the z790 from gigabyte in reallife, only on pictures. I wasn‘t able to use the left and the right screw holes from the 360mm radiator. Only the 4 in the middle. But ultimately it worked and it’s firmly tightened. A lot of other people had problems and were not able to mount this radiator.
@evanom117
4 ай бұрын
What intake fans do you have on the side?! Also why not intake fans on the bottom?
@Stephan-sPCCorner
4 ай бұрын
Side fans are: be quiet! Light Wings White 120mm On the bottom was no space due to the vertical gpu bracket.
@alfador66
3 ай бұрын
Did you need any adaptors to make the aio rgb work?
@Stephan-sPCCorner
3 ай бұрын
No, just connect all cables to the motherboard and that’s it. It works with msi mystic light, Signal RGB and some other rgb software
@vvvlTheHerolvvv
4 ай бұрын
Sorry for asking but do you think the ASUS ROG STRIX B650E-F GAMING WiFi will fit?
@Stephan-sPCCorner
4 ай бұрын
You mean in combination with the Arctic Freezer III? I wasn‘t able to use the left and the right screw holes from the 360mm radiator. Only the 4 in the middle. But ultimately it worked and it’s firmly tightened. The decoration cover from the MSI MEG X570 Unify is quite big. I haven’t seen a ROG Strix B650E-F in real, only on pictures, so i can not give you a 100% guarantee but i assume it would at least fit like in my case by using the middle screw holes.
@SH-798
4 ай бұрын
Did you try fitting it and did it work?
@vvvlTheHerolvvv
4 ай бұрын
@@SH-798 no I didn’t i bought a deepcool ls 750 zero dark instead didn’t want to risk it, because according to NZXT You can’t install a radiator thicker than 30mm in the NZXT H6 and the arctic is 38mm so i went with 27mm just to be safe. Feel free to ask me anything.
@SH-798
3 ай бұрын
@vvvlTheHerolvvv did you check how much headroom was available after you installed the radiator
@BeastRusher509
6 ай бұрын
do you think a b650 aorus elite ax v2 will fit?
@Stephan-sPCCorner
6 ай бұрын
Hi BeastRusher509, I can not say for sure. The decoration cover from the MSI MEG X570 Unify is really big. I assume that the decoration covers of other motherboards are a little bit smaller. We are talking about 1mm space with the MEG X570 Unify. So basically i assume that there will be no problem with other motherboards but i also don’t know all motherboards. Ultimately i can say i had „actually“ no problems, i just wasn‘t able to use the left and right screw holes from the radiator. I haven‘t seen a b650 aorus elite ax v2 in real life yet, only pictures but I would assume that you will have no problems.
@huenarbay1508
6 ай бұрын
what gpu bracket was used on this one?
@Stephan-sPCCorner
6 ай бұрын
Rebel C Series from Sharkoon.
@mayd3153
Ай бұрын
How you can sync all the rgb
@Stephan-sPCCorner
Ай бұрын
The gpu itself cannot change the color. It is fixed to arctic blue. The bequiet fans you can adjust with the software Signal RGB or MSI Msytic light if you use an MSI Motherboard.
Пікірлер: 49