TTI Nailer Showdown - Ryobi VS AEG/Ridgid VS Milwaukee kzitem.info/news/bejne/16OfzYxniZeCeYI
@riba2233
Жыл бұрын
Two videos in one day? Wow we are so lucky :)
@ajmedeiros77
Жыл бұрын
Bought the 30 degree as soon as it came out. Have nailed thousands of nails so far and it is fantastic! Not one jam yet. Drives 3 1/2 inch ring shank nails deep. It is heavy but for me I don’t nail all day so not having to drag the compressor and hose around and up stairs is completely worth it. I have every single other nail gun from ryobi and they’re all great, except the 15 gauge gets stuck and needs to be sprayed or oiled frequently. Hopefully they come out with a second Gen soon.
@wglenn174
3 ай бұрын
People are sleeping on Ryobi. But it's full line is the best kept secret
@Doyle047
Жыл бұрын
That what happens when senco design it. If you want an extended mag the AEG/RIDGID fit. Most of TTI framing nailers are designed of F35xp nailer.
@is5032
Жыл бұрын
I’ve got some Ryobi HP stuff and I quite like it. I too think the build quality is very impressive. Not the smallest stuff but very decent. I also have some non HP stuff and that stuff is a different league to the HP gear.
@RenegadesGarage
10 ай бұрын
Tools & Stuff.. Nice review. I've been wanting to get a framing nailer but not sure which brand to go with.
@ToolsAndStuffOFFICIAL
10 ай бұрын
I have 4. The one I grab the most is the AEG. Is it the best... probably not, but for small tasks it is the quickest and easiest one to use IMHO
@rayanator105
5 ай бұрын
Purchased one this week along with a 6.0AH One+ HP battery,fast charger,1000 pack box of 90mm×3.15 bright nails and a little bottle of lubrication oil from Bunnings Warehouse for pallet repairs/modifications and custom built pallets at work. Haven't gotten it out of the box yet and tried because I've been busy cutting firewood today for next year.
@HotForgeChaos
Жыл бұрын
Something I've found when nailing on fence pailings is to not use a framing gun. A coil gun is where its at. Framing gun is fine for short runs with a few cool down breaks, but I've found with my Milwaukee that when it starts getting hot, it hits harder because there's more pressure in the gas canister, which puts more strain on the firing pin and the end buffer, as well as sinking your nails deeper.
@lennertsluus5581
11 ай бұрын
Amazing review! I do have a question about this tool. Does the Ryobi framing nailer works with a makita battery using an adapter?
@bakedbeings
Жыл бұрын
I picked up a Makita battery to Ryobi tool adaptor yesterday. For my less used tools, I reckon 75% as good at 50% the price fits the brief.
@richiejames928
Жыл бұрын
Yeah these battery adapters for makita to ryobi are awesome. I use the little ryobi blower and also the ryobi hot-glue gun this way. Considering the fly zapper for camping trips too.
@feelingtardy
Жыл бұрын
exactly the way i do it
@riba2233
Жыл бұрын
I would like to see it compared to makita nailgun... oh wait 😭
@HotForgeChaos
Жыл бұрын
They make one, but its a piece of shit. The only time I'd rather use a Paslode
@pete_lind
Жыл бұрын
Because you dont specify what type of framing nailers , Makita GN 900 7,2V gas nailer . Not DIY tool for casual use because gas canister always leak . Pneumatic nailers Makita AN 944 , 21° for 50-90mm nails , AN 902 for 50-90mm , AN 960 or AN 961 for 55-100mm nails , 15°-16° all 3 have drum clip for 200 - 300 nails . Its not that Makita does not have amazing framing nailers , they just cant get that tech to cordless unit . these tools are in their under 9 bar tools . Makita high pressure nailer for 12,8-22,6 bar systems , AN711H , for 45 -75 mm nails , drum clip 0° , 300 nails . Thats the one they should make a cordless one from.
@riba2233
Жыл бұрын
@@pete_lind yeah I am aware of their pneu models, thinking about battery powered ones :)
@ryobinewzealand
Жыл бұрын
Love it. Need to get you around to do our fencing :)
@sassall4284
Жыл бұрын
Not only a tool review but also a how to fence 😍
@joshmultitool
Жыл бұрын
Cool video 👍i wish they made it in a makita
@72evenant35
Жыл бұрын
Awwwww tools been waiting for another nailer review bro. Cheers for the vid.
@ahhughes123
Жыл бұрын
Awesome video, thank you. Could you test it on fibre cement weatherboards please?
@richiejames928
Жыл бұрын
And to answer your opening question ‘who doesn’t love a nail gun’ ….. makita. they must hate them as they refuse to make a good one.
@For891
11 ай бұрын
Seriously! I own Makita cordless tools. I ended up going Ryobi for cordless nail guns. I’m really impressed with their brad and finish guns. I will absolutely give this a shot.
@richiejames928
11 ай бұрын
@@For891 you can’t really go wrong for the price with Ryobi. perfect for the home owner/DIYer. But they wouldn’t hold up to the everyday abuse I give them professionally so I went SENCO for all my battery guns. I’d go Milwaukee if I had to do it again. always used senco air guns before battery guns became useful. there guns last a lifetime with little to no servicing.
@txvet7738
Жыл бұрын
I bought the Ridgid version before Ryobi released theirs. It’s a Ryobi green clone, “Send in the CLONE!!” Lol
@MartyT
2 ай бұрын
I must have got a dud.. Mine punched a few nails in, now only grunts and shows solid red light every time I try to use it, I wait for green light, try again and it grunts again.. battery is still showing full bars and there is no jam. Disappointing
@ToolsAndStuffOFFICIAL
2 ай бұрын
Mine does the red light sometimes when I turn it upside-down. It's annoying, but still useable. I use the AEG one as my go to. By the way, I loved your Angry Ram channel back in the day, classic stuff.
@MartyT
Ай бұрын
@@ToolsAndStuffOFFICIAL Thanks mate. I figured out that it doesn't like cold day's 10c or lower, I tried it again on a warm day and it is much better, it doesn't work at certain angles either, weird.. Still gives red light occasionally but I'm in no hurry so I give it time to sort itself out.. Angry Rams son is still causing havoc, he broke into the neighbor's garden last week and got stuck in to his veges 😂
@richiejames928
Жыл бұрын
This actually seems like a decent 1st fix gun. Iv used an older generation gas paslode and it didn’t sink the nails as nicely as this did. and gas guns are nothing but grief. i always opt for screws now tho as nailers don’t pull wood together and you end up with gappy joints. 100mm screws all day long for any 2x framing work.
@HotForgeChaos
Жыл бұрын
I use 100mm bugle head batten screws to fix my rails to the posts. If I had more budget I'd be using stainless decking screws on the pailings
@deraid712
Жыл бұрын
It costs 300usd which kind of high price for Ryobi because its not professional heavy duty tool such as Dewalt, Hitachi/Hikoki/Metabo, Milwaukee
@ToolsAndStuffOFFICIAL
Жыл бұрын
It's better than a DeWalt framer.
@aaronoconnor606
Жыл бұрын
Well it's made by the same corporation as milwaukee and they are some of the best as far as battery powered nailers go
@ericwolff6059
Жыл бұрын
Nearly $800 [skin only] here in New Zealand.
@ToolsAndStuffOFFICIAL
Жыл бұрын
No. $699 in NZ.
@ericwolff6059
Жыл бұрын
Yes, correct,. It's the AEG (skin only) that's nearly $800 ($768). My error.
@nfi2nfi2
Жыл бұрын
I’ll still take the Hikoki, you can turn it on one handed it up on a ladder etc, wrist flick, till the gun back and rest on your palm two fingers grip the handle, index switches it on. Idk about the Milwaukee haven’t used it enough.
@robertrada4783
Жыл бұрын
I’m gonna need to take your word for it on that one. I can’t even see the LED’s on my hitachi’s, while holding down the microwave button and not having a fuel gauge on my batts. Spent a lot of time wondering if the batteries are dead or if I’ve turned the tool on or off or burst mode or…. Fucking hell.
@kentaroo.7759
Жыл бұрын
It's interesting that Ryobi made a 34⁰ framing nailer for the other countries. The US has only the 21⁰ and 30⁰ framing nailers.
@riba2233
Жыл бұрын
30 and 34 is the same thing
@Frieslick
Жыл бұрын
Makita fans over here like 😑
@EliotTruelove
Жыл бұрын
I may get this with a battery adapter and spraypaint it RustOleum Lagoon like my Milwaukee Nailers....
@Frieslick
Жыл бұрын
@@EliotTruelove haha, had to Google that colour, but will definitely keep that in mind if Makita screw up the battery framer I’ve been waiting 2 years for. The GN900SE is great when it works, but that’s it away for its second repair while I use a Fischer thing, which is actually Infinitely more reliable…
@juniorbucknor1333
Жыл бұрын
Test the 36v dust extractor please
@robertrada4783
Жыл бұрын
Puts Makita back on the map. Ryobi and AEG reward him for his efforts.
@kemalknight5505
Жыл бұрын
0:12. Thougth i was under attack!
@toolscientist
Жыл бұрын
13:40 nice 😂
@EliotTruelove
Жыл бұрын
That Ryobi seems to be an interesting backwards compatibility from Milwaukee to Ryobi. While people joke that Milwaukees are just Red Ryobis, this seems a case where this is a Green Milwaukee.
@BiohazarderV
Жыл бұрын
Techtronic Industries Co Ltd owns Milwaukee, AEG, Ridgid, Ryobi, etc.. 🙂
@ToolsAndStuffOFFICIAL
Жыл бұрын
@BiohazarderV Pretty obvious from his comment that he knows that.
@EliotTruelove
Жыл бұрын
@@BiohazarderV Yes, I am aware, which is why I draw comparisons. There may have been some sharing of tech between the TTI companies.
@HotForgeChaos
Жыл бұрын
Its more closer to the AEG/Ridgid version than the Milwaukeenee, yet somehow its still lighter than the Milwaukee
@kingjamezo4583
Жыл бұрын
I hope Makita seen this video and...😅
@RandolphJones-v3k
2 ай бұрын
One product at a time
@dimkinlv
Жыл бұрын
smoking gloves @17:00 :)
@ToolsAndStuffOFFICIAL
Жыл бұрын
I've been waiting for someone to say that.
@tikkigodman
11 ай бұрын
Geez man I clicked to learn about the nailer, not your 3d printer
Пікірлер: 65