I just bought the Ryobi corded drill with the wooden door Trimmer for my Steve's 6 panel Hollow Door and it worked absolutely AMAZING and literally trimmed the door like butter. *I HIGHLY RECOMMEND.*
@zionalexis2876
3 жыл бұрын
pro trick : you can watch movies at Flixzone. I've been using it for watching all kinds of movies during the lockdown.
@coltongenesis1517
3 жыл бұрын
@Zion Alexis Yup, have been using Flixzone for months myself :D
@KungFuTayo
3 жыл бұрын
Do you need to replace the sand paper?
@100mhopkins
2 жыл бұрын
Thanks for the excellent video introducing me to this tool. It's just what I've been looking for and am headed out right now to buy one! I'll let you know how it works. Mark - Westerville, Ohio
@princexxxx1
2 жыл бұрын
Sounds like a great product, although I wish your video showed closeups of the tool, the bit and how it removes the excess layer
@kevinpatzer4678
3 жыл бұрын
Thanks for this vid! Great detail. Full and in depth answered all of my questions before I could ask them. I'm buying this
@dblbassted
Жыл бұрын
Great review. Just finished my door and was glad to have this resource
@clearides2020
2 жыл бұрын
I’m replacing doors in my old house too. UGH. Came across this and saw your review! Thanks!!
@jjsantos3292
Жыл бұрын
This tool worked out amazingly for our door. Wish I bought it sooner!
@noelv1976
2 жыл бұрын
I'm thinking about getting this. I'm an apartment maintenance tech and I'm always working on doors. Getting tired of constantly aligning doors. It gets old after a while. This looks like it would offer a great solution
@livefreeandtoolon
2 жыл бұрын
I did maintenance for years and wish I had this back then!
@noelv1976
2 жыл бұрын
@@livefreeandtoolon well I ordered it. Should be here by the end of the week. Thanks for responding
@rob-toolsandtech2521
2 жыл бұрын
Great video. I just bought this. I have a bathroom door that in the humid moths won’t even close. The bottom 1/3 to 1/2 of the door overlaps the door jamb. I’m not sure if this will hit the floor before the cutter makes it to the bottom or not. (In other words the distance from the front of the tool to the cutter may be greater than the distance from the bottom of the door to the floor, so the floor may stop me from going down all of the way). I’m hoping this keeps me from having to take the door off.
@marknance6699
2 жыл бұрын
Thanks for this video. You have just saved me a world of time and some money also. I really enjoyed it, thanks again.
@peterbarlow8912
Жыл бұрын
If is like their lock set jig it’s flimsy. Also it looks like it’s going to grind off the edge bevel (2-3 degrees) door slabs come with. The stop side needs the bevel so the door corner doesn’t scrub the buck on opening. Really need a planer with a bevel in the fence. Stanley used to make a long jointer plane with a helical cutter and adjustable fence.
@keeper0523
3 жыл бұрын
Would the term Planer be more suitable?
@dhflannagan1
2 жыл бұрын
Great video. thanks so much for the review. I'm buying it. I get Ryobi wrong too.
@darrylrobinson1241
2 жыл бұрын
Jeez, I did not know something like this existed. Was trying to utilize sandpaper (pain in the butt, with a sanding block). Just happened to “Google” something to that affect and it came up with this. So off the YT to see it and saw your video. I will be hitting up my local Home Depot tomorrow to pick one up..
@gkp76
Жыл бұрын
Better than just sanding?
@fonzo2525
3 жыл бұрын
Does this create a lot of wood dust,I have electronics in that room and wondering if I should cover them,also does this trim doors that are painted?? Thx you.
@livefreeandtoolon
3 жыл бұрын
Yes it will shave painted doors, and it does create dust but not much as it collects inside the tool
@jank042000
3 жыл бұрын
will this work on the bottom of a door without removing the door? bottom of door swings freely over the wooden floor but rubs along the rug
@speye5275
3 жыл бұрын
Yes, just lower your floors.
@livefreeandtoolon
3 жыл бұрын
You’ll need to remove the door
@livefreeandtoolon
3 жыл бұрын
You’ll need to remove the door
@northsidejeff9551
5 ай бұрын
Saved me alot of time. Thank You 👍
@alrightythen1533
3 жыл бұрын
What does "scrub" mean. Is that a local slang for rub? Definitely first time I've heard that word used like that.
@spikefivefivefive
3 жыл бұрын
Maybe it came from the word "scrape" at some point. I have never heard it used that way either. Maybe a regional thing?
@tony2hotty
3 жыл бұрын
It's scrape and rub mixed together
@anthonysandoval965
3 жыл бұрын
Makes sence, it scrubs the paint off the inside of the jamb.
@redrumrabbit
2 жыл бұрын
A scrub is a guy that can’t get no love
@louiespray
Жыл бұрын
Will this tool make an angle cut?
@livefreeandtoolon
Жыл бұрын
It follows the angle of the door
@Unio-FL2022
Жыл бұрын
How much is it I'm in dubai
@jt8178
3 жыл бұрын
Looks like a good quick solution for wood doors, but what about steel doors, and those that drag on the bottom??
@livefreeandtoolon
3 жыл бұрын
depending on the door they can be shaved with a grinder or frame and hinge adjustment
@josephlowrance3
3 жыл бұрын
You should never grind down a steel door. If you have an issue it’s always with the jamb with a steel door.
@user-bw5xf3yr3m
3 жыл бұрын
How can I replace the drill bit?
@oatesandmessina
27 күн бұрын
This may work for unsticking a door edge but, if you have to trim a new door slab, don't use this tool. I needed to remove 1/8" and this removes such a small amount of material that it was easier just to break out the circular saw.
@IsidroZuniga
3 жыл бұрын
What speed will you put the drill at
@livefreeandtoolon
3 жыл бұрын
High
@KungFuTayo
3 жыл бұрын
Do this use sandpaper to grind it down, or something else?
@livefreeandtoolon
3 жыл бұрын
It’s a blade
@gregkilgore7525
2 жыл бұрын
Does this work on metal doors as well that scrubs?
@livefreeandtoolon
2 жыл бұрын
Nope
@cdncycler
3 жыл бұрын
what's the Ryobi part number is it?
@justinbrutaldrums1117
3 жыл бұрын
ya cant find this anywhere
@billbogan7377
3 жыл бұрын
A99dt01
@elliemajor6857
2 жыл бұрын
Do this tool wook on metal door
@livefreeandtoolon
2 жыл бұрын
No
@AZBACKPACKHUNTER
3 жыл бұрын
Can this be used to cut the spots for a door hinge?
@livefreeandtoolon
3 жыл бұрын
I don't think so, you will need the hinge router template or chisel with skilled hands. kzitem.info/news/bejne/r2przn6mn2h6amk Check out this video it may help
@lmo1960
3 жыл бұрын
No, this tool is for door edges only.
@jasondorsey683
2 жыл бұрын
Can I use any brand of drill?
@livefreeandtoolon
2 жыл бұрын
Yes, as long as it has an adjustable chuck
@marvellstarks2434
3 жыл бұрын
Love this thing
@drucilliadimiglio
2 жыл бұрын
WOW.....Shame on you for having such an organized cool workshop! I cannot have my wife watch this or she will make me clean up my shop to look like yours !
@godofgreen7807
3 жыл бұрын
Does it only work with Ryobi
@livefreeandtoolon
3 жыл бұрын
Any drill will work as long as it has a an adjustable chuck
@kevinohara8671
Жыл бұрын
I wonder if you can use it for cutting your hair lol
@livefreeandtoolon
Жыл бұрын
I heat it works great for a high and tight
@hughfitz95
2 жыл бұрын
Just use a planner, surly
@livefreeandtoolon
2 жыл бұрын
Too bulky for quick fixes not having to remove doors and logistically this is better
@randabuffer6562
3 жыл бұрын
Imma mill my glock slide with that 😄😄😄
@patrickmichaels1362
3 жыл бұрын
Mine works like shit
@luiswalker7782
2 жыл бұрын
Just plane it 😂
@alanmooney
2 жыл бұрын
Do me a favour, Please! Don't you think a house over 100 years olds deserves a little more care & attention than a a Ryobi Scrubber!
@livefreeandtoolon
2 жыл бұрын
Regular comedian over here, if you think this is all we do!😂🤣😆
@noelv1976
2 жыл бұрын
He doesn't have to do you any favors... And what's wrong with Ryobi?
Пікірлер: 73