Good stuff bud. Saved me a boat load of time. Was about to trace my brake wires to see where the failure was and watched your video... low and behold there was that cable lying there looking like it didn't belong to anything. On my 2012 the engine won't even kick over unless you apply pressure to the brake and since that was unplugged, it wasn't turning over. Running lights were on but brake lights weren't activating. If it helps anyone out there, I accidentally unplugged mine when taking the clutch cover off. - Best
@harrietkubiczrealtor-homes6736
4 жыл бұрын
Break lights seem like a good 💡
@jordanhowell3870
Жыл бұрын
yeah but wouldnt it not start if that was not plugged in?
@tajthekidd999
Жыл бұрын
My brake light takes forever it for me to connect it. But I’m not sure if I did the cables right for the headlight because I connected a headlight to it. I put the light on high beam, and it didn’t turn on.
@alanblunt3566
3 жыл бұрын
I have a 2013 800s that the previous owner has removed the brake block so my taillights are always on. I've got the brake block with the harness but the harness has 3 wires (one brown two orange) yours looks like it only has two wires coming from the harness. Any ideas or closer pictures of yours?
@dubba85
3 жыл бұрын
i have no power going to that switch the brown wire any one know why?
@jordanhowell3870
Жыл бұрын
thats a ground and when you hit the brake switch it grounds out. try hooking to the hot and then check one side for power and then hit the brake switch and then check the other side for power.
@korbelkiller7106
4 жыл бұрын
Yes it's always good to have brake lights lol
@HitchinMitch
4 жыл бұрын
👍 you reminded me to fix that before hitting the trails.
Пікірлер: 11