You have one of the best laser channels and I've watched a katrillion vids on lasers. You always seem to make the vids that others don't but everyone is wanting to learn just like this one. Nice job.
@computercreationz
Жыл бұрын
Thank you so much. I appreciate the comments and you watching
@veryberrydesigns
10 ай бұрын
Thanks for taking the time to make this (and other) very informative videos. This really helped me in getting my laser in my garage ready for the cold Canadian winter. I do have a heated garage, but the chiller lines are close to the uninsulated foundation wall and are subject to freezing without adding anti-freeze.
@computercreationz
10 ай бұрын
Glad it helped!, thank you so much for the contribution to the channel!
@maggie9256
11 ай бұрын
Thanks! I keep going back to this video each time I change the water on my chiller.
@computercreationz
11 ай бұрын
thank you so much for your donation to the channel, I missed this one and apologize for the tardiness of my appreciation!
@texasyotehunter2964
2 жыл бұрын
Didn’t think about keeping a spare flow switch. Just ordered one. Thanks for the tip.
@computercreationz
2 жыл бұрын
good deal, smart!
@coulterjb22
Жыл бұрын
Nice! i just got my S&A for my UV. The instructions were tossing doubt in my mind as to when I did what....and where. Thanks again!
@computercreationz
Жыл бұрын
Glad it helped!
@LoraleeEddy
7 ай бұрын
Thank you for this video! love all your help thought the videos you post on KZitem.
@computercreationz
6 ай бұрын
thanks for the input
@douglasladley8698
Жыл бұрын
Great ideal to keep spare parts on hand.
@computercreationz
Жыл бұрын
Ya you know you will need something like that at a critical time. Thanks for the comment
@maggie9256
2 жыл бұрын
Thank you for this clear explanation. Very helpful.
@computercreationz
Жыл бұрын
Glad it was helpful!
@TetraCNC
2 жыл бұрын
Awesome, I did not know about the water flow sensor thanks for the info.
@computercreationz
2 жыл бұрын
Glad to help
@malonecustomdesigns
2 жыл бұрын
Great video Robert! What's your thoughts about building a "permanent" platform for your chiller that would be high enough to drain it without having to use a block or something? Do you know of any reasons that wouldn't work?
@computercreationz
2 жыл бұрын
Less head pressure on the pump. Don’t know why it wouldn’t work!
@1haggler
2 ай бұрын
I take it you don't need to extract any excess water in the tube via the hose? Will the chiller with new water just cycle all that through? I am finally changing my water on my personal machine after a year 😆, only because I was not using it regularly, now I am.
@computercreationz
2 ай бұрын
If your chiller is below your tube all of the water in the tube draines out when you do this process
@tamerakriter65
2 жыл бұрын
My hero! Thank you. 🙂
@computercreationz
2 жыл бұрын
Thought you might like the timing on that!
@Vividlaserworks
2 жыл бұрын
Quick question… when I installed my 35/80 I took the foam wrapped around the the laser tube off and I noticed you still have it on there. Does it matter ethier way? Thanks for the video always great content
@CD_DESIGNS
2 жыл бұрын
Was gonna ask the same question
@computercreationz
Жыл бұрын
I removed it on my 24 and left it on my 35 not sure what the right answer is!
@kimfrancher1228
2 жыл бұрын
Thanks for the info
@computercreationz
2 жыл бұрын
thanks for watching
@evanwinn372
Жыл бұрын
Thanks!
@computercreationz
Жыл бұрын
my pleasure
@jav9888
Жыл бұрын
So I'm about to do the opposite, remove the winter anti freeze water, and replace it with new fresh distilled water. Can I use tap water to flush the old antifreeze water out or do you recommend using another bottle of distilled water to flush it out ? and I mean empty, fill with hose water, empty again then fill with Distilled water?
@computercreationz
Жыл бұрын
Distilled water is the only thing recommended!
@jav9888
Жыл бұрын
@@computercreationz Thanks for vid took me 3 flushes to get it clear. The video helped !
@Golfexpertbelieveme
Жыл бұрын
Do you turn everything off each night? If so do you have to check for air bubbles every day you turn it back on? I can’t find any videos or information on proper shutdown for Thunder laser. Also how often do you change your water out?
@computercreationz
Жыл бұрын
Once you have all your air bubbles out you should have them show up, so no I don’t worry about it once they’re all gone. Yes I turn everything off once I’m done for the day. Assuming your laser is in a conditioned space. Depending how much heat your laser is exposed to on distilled water change, Thunder recommends once a month.
@Mekaproyects
2 жыл бұрын
Excellent explanation and tips, congrats
@computercreationz
2 жыл бұрын
Glad it was helpful! Thank you!
@bginn3448
Жыл бұрын
Hi Robert, thanks for the video. I was looking at the manual (NOLED) and it states how close both the sides and back of the chiller must be maintained from obstacles. That back its about 5 feet and the sides are 3 foot. I was wondering if this was true based on the position of yours?
@computercreationz
Жыл бұрын
I don’t know anyone that would be able, to maintain those clearances!
@bginn3448
Жыл бұрын
@@computercreationz yes, I agree. I have about a foot in back and on the sides. Thanks for getting back...I can sleep now LOL
@thatsawrapcustomgifts
Жыл бұрын
How much distilled water are you putting in and how much antifreeze do you put in?
@computercreationz
Жыл бұрын
I use 1gallon of Rv antifreeze and just shy of 1 gallon of distilled water
@thatsawrapcustomgifts
Жыл бұрын
@@computercreationz Thank you that is what we were thinking.
@jennyb3850
9 ай бұрын
Hey Robert, It's been a year since this video...are you continuing to run almost a 50/50 antifreeze to water ratio? (It only freezes maybe 10 days out of the year here and just barely gets to freezing temps so I've been wondering about using diluted antifreeze as well.)
@computercreationz
9 ай бұрын
Yes it’s worked well so far! Remember you still need to change it regularly. The warmer the environment the more frequent you should change.
@jennyb3850
9 ай бұрын
@@computercreationz Thanks so are you running this combo all year (changing out regularly) or just for the "winter quarter" then back to 100% distilled water?
@computercreationz
9 ай бұрын
No just for the winter time then as soon as any freezing possibility has passed I got back to 100% distilled water. @@jennyb3850
@spacecoastmealworms
2 жыл бұрын
Why does the water need to be changed at all, if using distilled water in a closed system? I was hoping to hear the answer but it was never mentioned in the video.
@computercreationz
2 жыл бұрын
yes it’s a closed system, But lots of documented cases of algae growth with the distilled water over time. this growth will increase the conductive properties of the water! this can ruin your pump on your chiller and contaminate your laser tube to the point of failure. ignoring this will eventually catch up with you!
@angieangie21
2 жыл бұрын
@@computercreationz great video and tips thank you. How often do you recommend the water is changed to negate the issues you have mentioned please?
@ke3fo
Жыл бұрын
I was told to change the water every 4-6 weeks. But on most forums people haven’t changed their water for months!
@ntrumpdeplorable7781
Жыл бұрын
I have a NOVA 51 with a 130W tube and have the chiller on a stand about 1Ft high. Is there any reason you keep the chiller on the floor?
@computercreationz
Жыл бұрын
nope, in your case it’s actually better, it’s easier on the chiller water pump. less head pressure to move the water through the tube.
@davep1190
Жыл бұрын
Hi, I have noticed some dirt in my tubes. Is there a way to remove this?
@computercreationz
Жыл бұрын
It shouldn’t be dirt it’s a classed system but it could be small algae chunks. Not good! Talke a look at your tube. You should be your distilled water a least once a quarter more in humid areas
@moral_decay
7 ай бұрын
What are your recommendations on getting rid of noticable algae build up? :( @@computercreationz
Пікірлер: 57