S10 Blazer Remote Oil Filter Delete
Oil Filter Adapter - 14081300 - amzn.to/2EV2PxL
Oil Filter - PF47E - amzn.to/2WqOcgk
www.necarlog.com/
In this Video I remove the Remote Oil Filter and Oil Cooler lines from my 2000 Chevy S10 Blazer ZR2 4wd. This process removes the engine oil filter from under the radiator to mounting a smaller 2wd model filter onto the 4.3 Liter V6 Engine Block. The Oil Filter and Oil Filter Adapter part numbers are listed above for reference. If you are in need of an oil change then this is a great time to do this procedure as you are already replacing the oil filter.
The Oil Filter will be mounted to the engine block just above the front 4x4 differential. To get the oil filter in place you cannot pre-fill the filter as you have to and bring it over the differential then mount it in place. the filter cannot fit straight up between the diff and oil pan.
There are a few reasons you may want to do this remote oil filter delete and the first would be if your oil cooler lines are leaking and about to go as when these lines fail you will loose all oil and run you engine dry that could cause the engine to seize up. Deleteing the oil cooler and remote oil filter prevents any issues with these cooler lines.
I like to make my vehicles as simple as possible with the least amount of parts that could fail and cause damage.
The Chevrolet ZR2 is the off-road designed model that come lifted with a wider track width from the factory to improve off road capability. This ZR2 Blazer came stock with 31" tall tires, 3.73 Gears, and a Locking 8.5 Rear Axle.
DISCLAIMER: As an Amazon associate I earn from qualifying purchases.
#S10 #ZR2 #projecttruck
Негізгі бет S10 Blazer Remote Oil Filter Delete
Пікірлер: 38