Hola buen día, disculpe tengo una duda, yo comencé con una maquina Sculpfun S9, pero con el trascurso del tiempo la he mejorado, actualmente mi maquina la tengo adaptada con el Kit de cabezal de 33w, mi pregunta es, este Kit es compatible con la Sculfun S9 con cabezal de 33w?
@rudib-5304
Жыл бұрын
Too bad we have to use many parts of the standard frame. I would prefer to keep the standard frame complete and only move the laser head itself, or buy a second laser head, so I can use both setups.
@taszlermarcell785
10 ай бұрын
If I buy this 900x920 expansion kit, can I use just the Y axle expansions from it, to be able to make it 400x920 size and have the X axle expansion for spares if I need to cut bigger? Or building the 400x920 version is just possible with the Y expansion kit?
@gillesdumarey1636
4 ай бұрын
when using the rollerthing do i unplug both y axis motors and do i have to screw back the little screw on the pcb ?
@ChazmillsADLT
Жыл бұрын
Is there no settings to tell GRBL that you now have two Y axis motors??? I didn’t see any mention of setting this up
@robga2537
4 ай бұрын
I'm having the same problem, did you solve it?
@greghagenbucher4482
3 ай бұрын
30 Pro Max I am installing the expansion kit and found I do not have a screw to increase motor power. I see I have jumper pins. What to do?
@johnnyquest3472
Жыл бұрын
I have an S30 pro max laser engraver, I bought a 900x920mm expansion for it. I put it together based on the video and the error is that the y axis starts jumping after a while.
@scouzi7201
Жыл бұрын
adjust the wheels of you carriage
@supersamuelbarrios12
6 ай бұрын
Me pasa lo mismo, aún no he solucionado
@MultiSupy
Күн бұрын
Nici Sculpfun nu răspunde la mesajul nostru, rușine 😮
@ProjectileObjects
Жыл бұрын
I didn't get an upgraded hose. It's the same low quality plastic as the original.
@michaelkohler3584
Жыл бұрын
it's an old package. Same happend to me.
@NeverEnoughShow
Жыл бұрын
@@michaelkohler3584 I emailed them and they sent a replacement!
@HellRacer1963
Жыл бұрын
@@NeverEnoughShowbuy you by geekbuying, how is the email. Greets
@KTrose22
Жыл бұрын
I just received my s30 pro max and i haven’t put it together yet because I went ahead and ordered the expansion kit (905mm x 915mm). I did it this way because I figured at least this way I wouldn’t have to take it apart to add extension kit. My question-will I be ok just going off the normal directions or will it be different since I’m setting it all up together initially?
@SCULPFUNReal
Жыл бұрын
Sorry it is difficult for us to judge the cause of the problem from your description. 1. You can join the sculpfun fb group and post a detailed description & pictures of the problem: bit.ly/42q5rwO 2. Or communicate with our after-sales staff by email: support@sculpfun.com Thank you!
@manuelguzman1897
7 ай бұрын
Mi cable original de la s30 ultra trae 6 conectores 3 rojos y 3 azules y uno negro el cable de el kit de expansión solo trae 4 😥😥😥😥necesito ayuda de como conectarla
@andreapontiero9631
Жыл бұрын
Does this fit the S30 Ultra?
@SCULPFUNReal
11 ай бұрын
Sorry no.
@youroutdoors5453
Жыл бұрын
I put mine together just like the video shows, now when I try to cut or engrave a bigger or complex item it will cut two lines but not on the same line. It skips and cuts into a line it has already cut. What can I do to fix this problem? I did not have this problem with the smaller regular size S30 pro set up.
@elijahdungan3612
Жыл бұрын
might be an issue with belt tension or the table is uneven
@youroutdoors5453
Жыл бұрын
@@elijahdungan3612 Thank you for advice, I will consider those factors when I decide to put it back together.
@DerHobbykeller
Жыл бұрын
Die Probleme habe ich auch wenn ich mit weniger 700mm/m arbeite. AB etwa 700mm/m aufwärts ist alles gut was fürs schneide zu schnell ist um in einem Durchgang durchs Material zu kommen. Hab es selbst versucht das Problem mit einer Welle zwischen den beiden Y Antrieben zu lösen nur besteht das Problem weiterhin. Bin sehr enttäuscht über die X Achserweiterung ohne die ist alles super. Schade um das Geld.
@philoara5647
Жыл бұрын
Exactement le même problème !!!!!!!!!!!
@HellRacer1963
Жыл бұрын
Hello, i have buy the expansion kit with my S30 Pro Max and there was the plastic hose inside, how can i get the rubber hose, because the hose keeps kinking, bought on 4/7/2023 at Geekbuying. Greets
@TV-ju5gr
Жыл бұрын
Do you have a X-axis switch extension cable? I'm using the Y-axis extension kit.
@党一哲
Жыл бұрын
Not selling alone for the time being, you can find the extension line of the same port on Amazon or local malls.
@jeffreyoostendorp569
Жыл бұрын
When you put the power harder , do you need to need to turn both screws 90° ore just one?
@党一哲
Жыл бұрын
What do you mean? Laser head screw? Both should be tightened. If not, please attach the video time
@lizettefernandez7858
Жыл бұрын
Have the same question, they mentioned em in plural, I'm scared jajaajajaja jajaja. Please tell me your results.
@党一哲
Жыл бұрын
@@lizettefernandez7858 5:08? Sorry! Poor English. Just turn the first screw on the left.
@党一哲
Жыл бұрын
5:08? Sorry! Poor English. Just turn the first screw on the left.
@Chaos_God_of_Fate
10 ай бұрын
@@党一哲Thank you, I noticed the plural as well and was a bit paranoid. thanks for the answer- this should be a pinned comment/answer!
@topreggaeremixdopiaui7114
Жыл бұрын
Quero comprar uma ja com o kit de extensao 9nde comprar
@junvervasig
Жыл бұрын
i love this!
@SCULPFUNReal
Жыл бұрын
😘
@Tellooli
Жыл бұрын
Does this extender fit the sculpfun s9?
@SCULPFUNReal
Жыл бұрын
Sorry no
@eclipsa8a960
5 ай бұрын
Yo lo adquirí tengo un láser s30 pro Max En primer lugar no me gustó se tenga que desarmar el marco donde va el láser, el segundo eje que se le agrega esta muy tenso si lo aflojo tantito o las bandas se hace todo es un descontrol, de cuando mandaba hacer algo. Tampoco me gusto que no viniera el fierro que sostenía a ambos ejes, porque al momento de hacer algo no se alienan por más que los acomodes. puse las medidas del video y el láser siempre se detenía en algún punto y no trabajaba, cuando la iniciaba también se detenía y no llega al inicio me decía error por no llegar al tope. Y resulta que ahora mi láser NO hace nada, los programas detectan a mi láser pero no se mueve en lo absoluto ya llame un técnico y nada le encontró nada. No se qué más hacer, alguien sabe qué hacer? O alguien más le paso lo mismo que a mi?
@freeriders_pe
Жыл бұрын
Hello. does it work for s9 model?
@SCULPFUNReal
Жыл бұрын
Sorry no.
@phillipbowen5840
Жыл бұрын
My sculpfun didnt come with a laser
@elgrande3353
Жыл бұрын
Is there anyone here who has assembled the 935x900 and has had success? I've had limited success on small jobs, but anytime I stretch the laser area, it fails miserably. The component that slides left/right on the carriage beam seems really tight...way more than the original carriage beam.
@philoara5647
Жыл бұрын
J’ai exactement le même problème : des décalages avec l’extension !!!!
@vojtatesar6204
Жыл бұрын
You have to turn the screw on the motherboard to increase the volts
@ShopDog1021
Ай бұрын
@@vojtatesar6204can you go into more details is there a video on how to do this
Leider überzeugt die Funktion der Erweiterung nicht wirklich Bei Geschwindigkeiten unter 700mm/m gibt es zu großen Ungenauigkeiten der X Achse. Bin sehr enttäuscht über die Anschaffung hätte ich das gewußt hätte auch ich mir nur die Erweiterung der Y Achse gekauft.
@SCULPFUNReal
Жыл бұрын
If the X-axis is too different, it may not be adjusted properly. If the Y-axis jumps, it is basically the asymmetrical position of the engraving at the beginning. If you need more help, send email to: support@sculpfun.com
@johanmiguelcarranzaalvarez2445
Жыл бұрын
Me llego el motor con giro invertido, es un problema
@ausurero
Жыл бұрын
aun tienes ese problema ? yo lo pude resolver :D
@zldreams5776
Жыл бұрын
@@ausurero como lo resolviste cuando pongo mi máquina que vaya ala derecha se va ala izquierda
@johnnyjavier981
Жыл бұрын
😔 It worked for me and then it stopped working
@teonascott8820
11 ай бұрын
I've had nothing but problems since i upgraded to a larger work area😡
@philoara5647
Жыл бұрын
GROS PROBLÈME DE DÉCALAGE AVEC CE KIT D’EXTENSION !!! AUCUNE SOLUTION N’A ÉTÉ TROUVÉE…😢😢😢
Пікірлер: 56