Bought one, installed in about 20 minutes and works like a charm! Great product and superb quality.
@MrGiarc1972
7 жыл бұрын
Just wanted to ask a question regarding installation. You guys have made it seem really easy. I have seen other videos of different bikes having a mechanical tensioner installed and they have found TDC prior to removing the hydraulic tensioner and installing the mechanical unit. Is this overkill, or is the BMW somehow different, so requiring a different technique?
@NoShadowOfDoubt1
2 жыл бұрын
I'm actually waiting on this to arrive and have a question: is it easy to feel the threaded piece against the plunger? and then how easy to feel the chain rail against the plunger? To make sure you are not pushing it too far? Thanks
@olly2884
2 жыл бұрын
Brilliant video, just a quick one..should i set this when the engine is warm or is cold ok? Thanks 👍
@user-bs6fp5kt4i
Жыл бұрын
Witam. Podobno zimny . Tak czytałem . Odpisał mi old mechanik. Pozdrawiam
@marcletort6437
Ай бұрын
Excellent ✌️✌️
@mariusztrzebski2490
2 жыл бұрын
Witam jaki jest koszt napinacza do BMW s1000rr 2011 r , i czy Pan wyślę do Polski ?
@giuseppemancuso4050
5 ай бұрын
Ciao amico bisogna smontare il coperchio delle punterie per eseguire il montaggio del tenditore onde evitare che la catena esce fuori sede
@CubanRider
8 жыл бұрын
What's the part number? I just removed my stock tensioner last week to inspect it, the timing chain is getting noisy after 19k miles.
@socalmotowerks8526
8 жыл бұрын
Cuban Rider this is a Southern California MotoWerks part. If you would like to purchase one email cj@socalmotowerks.com
@CubanRider
8 жыл бұрын
SoCal MotoWerks thanks, I plan to get a tensioner in the next couple of months; I'll contact you then.
@EEEBA1
7 жыл бұрын
Is it exactly the same on the 2015 S1000R? Mine makes a rattling noise. And can the I have on my bike now be adjusted to make the noise disappear? Thank you
@socalmotowerks8526
7 жыл бұрын
E.S. Slc yes it is the same for all of the s1000 engines the XR in this video just happens to be there for the making of the video
@user-xx5kq3ti2u
6 ай бұрын
Is this the same procedure for the s1000rr gen 3
@EEEBA1
4 жыл бұрын
Which model years have that problem? I got the 2018 S1000XR. Thank you.
@EJ-ro8no
4 жыл бұрын
Sir! how much it cost to replace & fix the cam tensioner ?
@Fab24hdumans
Жыл бұрын
Hopefully I can get an answer… first thank you for the video, I have a 2020 S1000XR and my engine makes this same rough metallic start.. is this part should fit, or better not even try… And what the solution for 2nd Gen… cause I tell you, is it not pleasant to hear..
@socalmotowerks8526
Жыл бұрын
I have a device for the newer model that i have made but it is in the testing phase. It will not be an easy installation as the tensioner is located in a different spot that requires professional installation. So at this time I am trying to decide if it will make production. I can tell you it does fix the problem and makes the motor have much better response and eliminates the noise. The tensioner in this video will not work with the newer models though that is for sure. Email me directly and i will keep you in the loop with production process. CJ@SOCALMOTOWERKS.COM
@Fab24hdumans
Жыл бұрын
@@socalmotowerks8526 thank you for your prompt response. I will email u to keep in touch with the progress. I would definitely make a detailed video with your product, step by step how to “open”the bike and install your device.. thank for your great product.
@giuseppemancuso4050
5 ай бұрын
In co cessionaria bmw vendo il prodotto originale modificato con tappo argento e il caso fare la spesa o è consigliabile acquistare con regolazione a vita
@haristonmarreiros7284
3 жыл бұрын
I really like your vids, but im here to see if you can help me! Im having problems with the original chain cam tensioner, my 2018 s1000r is having lots of vibatrion in that cam chain, i already changed the original hydaulic tensioner 2 times, and for one month or less the issue its gone, then it comes back again. Any problems with the manual tensioner? How many miles or kilometers between ajusments. Thk in advance sir!
@socalmotowerks8526
3 жыл бұрын
No problems with the manual tensioner. The problems you are having is why we made this tensioner. As far as adjustments go, our customers say they never adjust it they set it and forget it.
@lukajakovljevic5181
9 ай бұрын
What is thia i dont uderstand do i need to do dis what is this for i just bought s 1000 xr 2018
@MitsCooKieHH
4 жыл бұрын
How often should the manual adjuster be adjusted? every 1000km?
@socalmotowerks8526
3 жыл бұрын
Most people have stated that they never need to adjust it
@detko12345
3 жыл бұрын
Hello there, last year my tensioner was replaced at the service station, since then I have done about 23k km ... now especially with a cold start ignition I hear a loud sound again. Can I reset the tensioner as mentioned at the end of the video, or do I need to change the whole tensioner again? Thanks for the ansver in advance😉
@philipw7058
Жыл бұрын
If your chain is that bad change it you can’t keep pushing the tensioner guide in
@MitsCooKieHH
4 жыл бұрын
What is the diffrence between this and the updated silver cap that you can get at the bmw motorrad dealer after 15.000km?
@AntaresSQ01
3 жыл бұрын
Silver cap is just a thicker cap (pushes the oil driven plunger in a bit further) and is not a solution to the fundamental issue. As for your other question, these barely ever need adjustment over the life of the bike. Cam chain doesn't usually stretch that much to cause rattle, it's the oil driven plunger not providing enough tension. Most people go 10s of thousands of kms without needing to adjust it, but probably a good practice to recheck at every oil change, or if you start to hear a rattle coming back then you can adjust a little on it, usually barely needs anything (less than quarter of a turn)
@steveprentice4513
Жыл бұрын
Very useful
@stefanleitner5928
7 жыл бұрын
Is it recommended to exchange it preventiv? Thanks for feedback
@socalmotowerks8526
7 жыл бұрын
Stefan L. I would recommend it simply because it isn't a matter of if it will fail but when.
@SuperBloder
Жыл бұрын
Is these rattle when start up bad for engine if i dont change to silver plug? Please awnser me
@AGATools
Жыл бұрын
Overtime, yes. BEtter to address it now rather than later.
@SuperBloder
Жыл бұрын
what could happen later? @@AGATools
@krytenLister
7 жыл бұрын
Is this related to the noisy ticking sound that some people have been reporting?
@socalmotowerks8526
7 жыл бұрын
Kryten L Yes this product creates a fix for the ticking noise
@krytenLister
7 жыл бұрын
SoCal MotoWerks So what is the actual cause of the Ticking? is it easy to hear when the issue is starting to appear. The bike is naturally noisy and it must be hard to hear when something is starting to go wrong. I have an XR and want to know what I should be listening out for. Thanks
@socalmotowerks8526
7 жыл бұрын
Kryten L The motor on the s1000 does have a lot of noise for sure but most of it is between the clutch basket and the cam chain tensioner. The tension on the cam chain is insufficient and this part fixes that problem. If you stand on the right side of your bike and the rattle noise is coming from the upper cylinder head area then you have a tensioner problem. This will fix it
@michaelbarker3850
4 жыл бұрын
SoCal MotoWerks do you block off the oil supply for the hydraulic tensioner when switching to manual tensioner
@tobiaszdabkowski5450
4 жыл бұрын
SoCal MotoWerks i going to buy s1000r tommorow . I checked that bike a week ago And only consider why I didnt buy its a aweful rattling noise from The engine. Can you give me your e-mail And I will send you the video ? Can you check if this bike has same noise ? Thanks
@javierpadilla3267
4 жыл бұрын
Hii!! I’m from Barcelona, Spain. Im very interested in this piece cause in my countries around I didn’t found it. Its possible to buy it from my country? Thank you so much!!
@octaviacero
3 жыл бұрын
Perdona, jo tb l'estic buscant. La he trobat per Ebay, pero encara no la he comprat.. A tu tb et canta en fred quant l'arrenques ?
@javierpadilla3267
3 жыл бұрын
@@octaviacero Hola!! Sii...vaig anar a l bmw daqui i em van dir que no mho recomenaven...que era tipic en uns altres paisos pero aqui si etnpassa qualsevol cosa bmw no es fa responsable..! Aixi que, a conviure...jajaja
@holgerwach971
3 жыл бұрын
shop.alpharacing.com/shop/index.php?main_page=product_cvs_info&cPath=611&products_id=15154 I would defenetly order here ;-) Perfect support and this buddies defently know what to do!
@INEEDPAPER2
2 жыл бұрын
CJ where are you guys I need your help
@socalmotowerks8526
2 жыл бұрын
email me cj@socalmotowerks.com
@guillaumebocquet787
4 жыл бұрын
hello where buy this item ? Thanks
@socalmotowerks8526
4 жыл бұрын
GUILLAUME BOCQUET www.socalmotowerks.com
@aasaullo
4 жыл бұрын
where I can buy this chain tensioner???
@socalmotowerks8526
4 жыл бұрын
www.socalmotowerks.com
@robbwood6824
3 жыл бұрын
Hello. Are you still in business?
@socalmotowerks8526
3 жыл бұрын
Yes we are visit our website www.socalmotowerks.com
@desmomille79
5 жыл бұрын
Where can I order it from Europe?
@socalmotowerks8526
5 жыл бұрын
Emiz I currently don’t have a distribution center in Europe. Email me directly CJ@socalmotowerks.com and I will work with you on getting it to you.
This is a complete wast of time it goes in no further than the original and has no movement abilities for the chain safety and if that end nut comes loose while driving your bike you can kiss your engine goodbye,don’t do it
@socalmotowerks8526
Жыл бұрын
First off if the nut comes loose while you are riding your bike then you had no business working on your bike in the first place. Secondly this product is actually designed to have more movement to adjust for chain slack than a factory tensioner does that’s why it works. You must have bought one of those cheep aftermarket Chinese ones and not ours.
@Zukilover305
9 ай бұрын
I think more what he ment was. Should the tensioner be solid/non moving? The factory is spring loaded. ??
Пікірлер: 62