Its funny to me, that your Blue, is in fact, Blue. Hopefully the culprit of the excess crankcase pressure isn't abuse nor the cam, and a simple failure that can be remedied with better parts. Looking forward to the next one Jimbo!
@robotcantina8957
Сағат бұрын
LOL, Hi Eric. The engine issue is still a mystery, I'm digging into it right now. It probably would take 15 min to figure it out, but as you know when filming it take a lot longer. Stay tuned!
@kevin9c1
Сағат бұрын
@@robotcantina8957 Turbo and send it.
@Jeffsa12
50 минут бұрын
Hang on, I'm kinda old so maybe I'm just confused. I thought his name is old Blue, so that would make his pry bar Eric? lol Maybe he can donate a small car engine/trans someday for a future project. A little gas 3 cyl would be cool? Did the American versions of the Smart car ever have them. I think the overseas versions had a diesel 3 cyl turbo diesel available? Or take a commonly available 4 cyl and convert it to run without an ECU/FI? Or how bout an LS swap...lol
@CableWrestler
32 минут бұрын
I always wanted to see a propane forklift engine in a car...
@joshg1244
32 минут бұрын
I love when Blue comes out for a visit!
@elitecpudoc329
5 сағат бұрын
Jimbo needs comments to drive the algorithm, but doesnt want to answer questions that have been previously answered, if only youtube would let you search the comments. However, if Jimbo can get you to watch old videos, that helps drive traffic as well. Keep up the great work Jimbo!
@ncopp4358
3 сағат бұрын
@@elitecpudoc329 Jimbo's videos are timeless
@LeewardStudios
7 сағат бұрын
Love the blue reference. Eric has a sense of humor worthy of your sarcasm level!
@june_could
6 сағат бұрын
Crossover episode 😊
@Big_Loo
6 сағат бұрын
We have a shaft and two balls. DON'T
@voided76
6 сағат бұрын
@@Big_Loo we need to do the next eric thing and blur it all out like those water pump bosses
@m.kriddick2731
4 сағат бұрын
Seeing baby blue was nice
@giggiddy
4 сағат бұрын
Alot of the fuel economy folks are a one trick pony. This project is huge and fuel economy is not the focus. Most of us don't care.
@ryecarlson7867
6 сағат бұрын
potential oil fire? LETS PULL OVER NEXT TO THE GIANT WALL OF HAY!
@robotcantina8957
5 сағат бұрын
Good point! lol, I reckon that wasn't my best decision.
@Nothingtoya
4 сағат бұрын
To be fair, he didn't know all of that was going on. The car has a leak on the transmission.
@ptonpc
4 сағат бұрын
Meh, what's the worst that can happen? :D (Don't answer that!)
@JREwing78
3 сағат бұрын
Think of all the views that video would've received! I wonder if that would've been enough to reimburse the farmer. Eh, it's probably a good thing we didn't find out.
@FrietjeOorlog
Сағат бұрын
Who doesn't like a good bonfire? (the farmer who owns the hay doesn't)
@stephengreen3566
5 сағат бұрын
I watch Robot Cantina and then go directly to "I do Cars" and watch Eric do his thing. My Sunday mornings are so relaxing. Thank you.
@jdbertel33
3 сағат бұрын
Yep, then a guy has to wait the long wait til Friday until Derek posts.
@buffuniballer
3 сағат бұрын
@@jdbertel33 South Main Auto might pick you up during the week.
@jdbertel33
3 сағат бұрын
@@buffuniballer “hey there viewers!” Does deliver that dopamine hit.
@RAWRMotorsports
Сағат бұрын
Borrow cars and cameras 670 for a collab 😅😅
@etcss642
6 сағат бұрын
IDC reference to go with the VGG sticker under the Honda's hood. Wonderful! Now add some W Wes W to round out the 4 corners of quality weekend YT entertainment. Glad to have RC in the mix. Thanks Jimbo.
@averyintrusive7610
5 сағат бұрын
I almost commented last video about suspect compression. It explains the egt variances and low rpm carb tuning, compression release mechanism notwithstanding. It will also give bogus air fuel readings since it's an average from one sensor across both banks. Looks like it's time to throw a cheap quart of oil in the boot as well. All that said I really enjoy following along with these frankenprojects. Thanks for bringing me along for the ride!
@mhammadalloush5104
4 сағат бұрын
If I gotta guess about which cylinder is blown I'd say it's the one with the lower EGT, but I have no idea what it actually means so whatever
@der_pinguin44
5 сағат бұрын
This channel is like an ogre: it has layers.
@goosenotmaverick1156
5 сағат бұрын
Oh! Like a cake?!
@Reman1975
2 сағат бұрын
Did anyone else read "Ogre" as "0rgy"? :D
@goosenotmaverick1156
Сағат бұрын
@@Reman1975 I think that might be just you.
@goosenotmaverick1156
Сағат бұрын
@Reman1975 however, I cannot deny that I did laugh. I can see how one mightve done that
@Adam-nv9zo
6 сағат бұрын
The mini blue was a funny addition to the video. Great work, as always.
@dustinswatsons9150
6 сағат бұрын
You blue it .-.
@dustinswatsons9150
5 сағат бұрын
@@Adam-nv9zo it would have been better if I said you blue the whistle on that lol
@dereksmith1803
5 сағат бұрын
Love your "Blue" reference. I Do Cars is awesome. Great sense of humor. Great personalized plate.
@robotcantina8957
5 сағат бұрын
Right on!
@dennisyoung4631
Сағат бұрын
@@dereksmith1803 have wondered where to get such a pry-tool myself…
@thomaspryor8202
Сағат бұрын
As a small engine mechanic I was flabbergasted that the cam mode worked. Well done!
@striknein
6 сағат бұрын
Loved the shifter jiggle animation
@robotcantina8957
5 сағат бұрын
LOL, thanks! that took me about five minuets to animate.
@jhrubicon1470
7 сағат бұрын
Sunday morning relaxation time
@tcmtech7515
3 сағат бұрын
A massive amount of head gasket failures come from every manufacturer using *'torque to yield' bolts* which are *a fancy name for sub-grade 3 bolts with super premium prices.* Years ago I when I went to college for tech trades the machining lab I was in got a hold of some TTY bolts the auto tech labs had and wanted to know what made them so special. The short story is that when we did the standard torsion, tensile and hardness yield tests on them they were in the same range as standard cheapo Grade 3 hardware! Because of that to this day whenever I do head work on any modern engine I put in high-grade bolts torqued to 10% over spec and I have never had a head gasket blow out on an engine a second time no matter how hard they were abused.
@mike_oe
Сағат бұрын
Interesting, thanks for the info!
@iiisaac1312
Сағат бұрын
I HATE CORPORATE BEAN COUNTERS
@RandyDiesel-se9jo
5 сағат бұрын
Mad respect to guys like Jimbo! 70 year old and stil rigging them thingamajigs
@LouiesWorkshop
7 сағат бұрын
My favorite content, Engines and Electronic Jerry-rigging all put into one video series!
@TrilogyBPM
6 сағат бұрын
I got eggs and bacon sizzling on the griddle with some robot cantina on the kitchen TV. What an awesome way to start Sunday morning. Also thoroughly enjoyed the blue reference.
@bosh6604
6 сағат бұрын
I love the "unecessary" explanations quite a lot because it often makes me notice things, that otherwise wouldn't have crossed my mind (I am probably the most skilled at electronics at my workplace. Im a physiotherapist though :D )
@Dis-Emboweled
6 сағат бұрын
Ooooh Blue! 😂 I was also 1/2 expecting you to throw a water pump Jimbo! 😂
@robotcantina8957
5 сағат бұрын
LOL,
@fice5981
3 сағат бұрын
Been here since the first 212cc insight video, sad to see KZitem hasn’t picked you up in it’s algorithm yet, keep up the great work
@robotcantina8957
2 сағат бұрын
I rode the algorithm wave twice now, I'm hoping it shows up again soon.
@miguelgameiro8063
7 сағат бұрын
Oh boy can’t wait for another engine teardown
@Steelythestacker
7 сағат бұрын
I absolutely love doing things like this Unfortunately my days of doing so are past due to a disability that was caused by working on a car. I bought my buddy a case of beer to help me work on my car in his garage. Unfortunately he got into the beer before we started working on the car. The result of that was him bumping the car off the jack stands while I was underneath it. The car crushed me pretty good. Screwed my back up pretty bad, collapsed a lung, put me in the hospital for 9 days. Ultimately it made it so I was unable to work and have been on disability now for 15 years. So, watching someone else do things like this is better than nothing. I'm still able to keep the brain working by watching, even if I can't participate. Thanks for giving an old electro mechanical technician something to watch. Keep em coming please! Edit: does that BFE sticker stand for what I think it does? Lol
@virolla
6 сағат бұрын
Unfortunately I'm late, but every time I put a car on axle stands I bump it as hard as I can (without denting it or breaking my wrists 😅). Better worry about a crushed car than a crushed man... Thank you for giving even more sense to my seemingly craziness.
@georgeorwell3573
6 сағат бұрын
I look fwd to watching these for the same reason. Im retired from blue collar jobs my whole life and can no longer build things. A bad fall put my DIY days to an end. Don't worry, I hear in heaven we get a nice workshop and any snap on tools we want.
@Steelythestacker
5 сағат бұрын
@@virollaI should have had wood blocks under it instead of stands. It was a gravel floor not concrete. That damned hindsight vision and all ya know. Thankfully it was a smaller car and I actually self extracted before anyone had a chance to help. I thought I was fine until about 10 minutes later when the adrenaline wore off. Then the pain hit like a train.
@Steelythestacker
5 сағат бұрын
@@georgeorwell3573I have managed to find a couple hobbies that help that don't require much physical exertion, the latest is refining precious metals, mostly silver because I can afford it. Nothing quite replaces building something with your hands though.
@robotcantina8957
5 сағат бұрын
Indeed the BFE sticker is what you think it is.
@flyonbyya
Сағат бұрын
Eric’s ‘Blue’ is his go-to when the tuff gets goin’!
@kcraig51
6 сағат бұрын
My dad said his boss would say; "I love hard work, I can sit and watch it for hours." They were putting on hot tar roofs in summer. 🤨 ANY pressure in a crankcase is too much pressure. It should be under vacuum. Just for those who may not know, 'cause you don't know what you don't know. Trust me, I know!
@gabe1254
4 сағат бұрын
23:46 That 670 sounds amazing, you about got that thing dialed Jimbo !
@jeffreylyons1531
6 сағат бұрын
10.5 volts while cranking looks good to me 👍
@michaelblacktree
5 сағат бұрын
It's a lot better than 7! 😎
@danaleks5810
6 сағат бұрын
I saw this mechanism 2weeks ago the first time when a Honda was completely submerged and after coming out of the water started withouts hydro locking and I was whaaaaat how? And that's exactly how. This flywheel mechanism at the camshaft left the exhaust valves open for the water while cranking. And now I see it again on your channel :D
@giggiddy
4 сағат бұрын
Many people look at what you have there and think how small and simple it is. They don't appreciate the incredible amount of research and development that has gone into that. Even the transmission from that engine to the car transmission is next level stuff that took hundreds of hours to devise and everything is one off buddy. Cheers Love this stuff.
@robotcantina8957
4 сағат бұрын
Thanks!
@neutrodyne
2 сағат бұрын
I love these videos. The narrations you do on them are great and you have an excellent voice for it. On a side note I had an R10 as a teenager and it got 35MPG on the highway.
@robotcantina8957
2 сағат бұрын
Thanks for the kind words. So it sounds like we managed to get the fuel economy about right on this project..
@stevecunningham2759
3 сағат бұрын
This is a most interesting channel for us tinkerers! Thanks for consistently great content. One of the steps in field diagnostics is to determine the last service/repair work that was done. (If the operator/owner will tell you.) Camshaft castration could be investigated as a possible mode of failure.
@lindsaydempsey5683
3 сағат бұрын
Brilliant, thank you Jimbo, and I want to call out a couple of things in the video that seem like a significant improvement on the already great videos that you produce: 1 I love the editing and production on this video, especially the part showing the bolts and nuts and belts coming off, the coffee machine and the graphics inserted into some of the still shots, you've got to love that hamster graphic. Top shelf editing and composition IMO. 2 I really appreciate that you take the time to explain stuff for the benefit of those who know less about engines that you do, and the way you do that is great, you're not talking down to anyone, you're just explaining stuff and I'm sure that helps reduce potential flame wars in the comments. I certainly do appreciate the reference to 'Blue', I spend far too much time watching Eric's videos, but they are good.
@robotcantina8957
2 сағат бұрын
Thanks! I also spend too much time watching Eric take engines apart.
@reneetekanawa-hughes215
7 сағат бұрын
Watching from New Zealand 🇳🇿
@danhard8440
6 сағат бұрын
i cant even imaging what its like living there such a beautiful looking area
@reneetekanawa-hughes215
6 сағат бұрын
@@danhard8440beautiful place to live, where are you watching from? 🙏🙌
@danhard8440
5 сағат бұрын
@@reneetekanawa-hughes215 Minneapolis Minnesota USA under a mile from where the George Floyd incident was🤣
@lindsaydempsey5683
3 сағат бұрын
A kiwi watching from Alberta, Canada
@mike_oe
Сағат бұрын
Great episode, thanks. Also nice to see Blue's smaller brother appear in your channel! I must have watched 40 or 50 episodes of the original Blue's channel with keen interest.
@johnvender
4 сағат бұрын
I also love Eric's journies of discovery of malice in the combustion palace and forbidden glitter 😃
@mungtor
7 сағат бұрын
Nice Blue reference. I always wonder how much overlap there is between the KZitemrs I follow. Robot Cantina, South Main Auto, Watch Wes Work, I Do Cars, and Vice Grip Garage are staples of my automotive viewing.
@danhard8440
6 сағат бұрын
he also watches sleeper dude channel
@danhard8440
6 сағат бұрын
out of your list i only watch this one and Ido cars I personally cant stand VGG
@Adrenacyde
6 сағат бұрын
@@danhard8440 Yeah, his "content" regularly shows up in the sidebar for me. As much as I say Not Interested or whatever, it keeps coming.
@Mis73rRand0m
5 сағат бұрын
I tried to like VGG but he waffles and drags on about stuff, says annoying words instead of the correct ones, and doesn't seem to learn from lessons he likes to preach.
@Adrenacyde
4 сағат бұрын
@@Mis73rRand0m You can only say things like "Sparkolators" so many times before it's time to turn the Channel. Catering to a certain low-tier demographic that just eats that stuff up...
@plezo69
Сағат бұрын
I just spent this morning hauling hay over in New mexico. It's for ease of loading helps the stacker get the stacks of bales straight to load them on the trucks.
@thatcheapguy525
19 минут бұрын
I recon you did the nicest thing anyone has ever done to a Briggs & Scrap 'em engine, second hand oil is such a treat!
@evoemperor3776
3 сағат бұрын
Thumbs up if you want to see him do a long road trip with one of his project cars
@Ljay-us7rc3ev8t
48 минут бұрын
Were praying for her to be okay :) Thanks for such a awesome video :)
@michaelcrumlett187
5 сағат бұрын
Love this stuff! Nothing beats Harbor Freight and weird little cars.
@wadet73
5 сағат бұрын
I greatly appreciate the cleverly placed microwave beeps. Gone are the days of the half moon thingy I wonder how the Renault would do with the engine from my lawnmower, a Briggs and Stratton 870cc 27hp v twin (Bad Boy 60") Cafe Bustello makes oil? TYPICAL JIMMY TO THE LAST "DOINK". I was expecting the beep 😢
@Del350K4
6 сағат бұрын
"the oil will exit the engine with authority" : )
@johanslabbert2869
2 сағат бұрын
That’s some neat battery wiring, I’ve done a few. Nice touch to locate the battery on the opposite side to the driver, on very light cars like this such tiny details makes enough of a difference to matter. Of course, by moving the battery to the rear you’ve now made the front even lighter, possibly upsetting the handling balance of this finely tuned motor car. I’d offset that by putting on a few pounds. The things we do for our cars 💁🏻♂️😅
@rudyossanchez
16 минут бұрын
Jimbo's videos bring joy to my heart 😊
@goosenotmaverick1156
5 сағат бұрын
Ayyyyyye let Sunday Cantina and Coffee commence! Hope you had a good week, Jimbo! Uh oh you already said something about disastrous. This should be interesting.
@wade-potato6200
3 сағат бұрын
Haha I love your imperial and metric conversions. The Miata to MX-5 exchange was very funny
@robotcantina8957
2 сағат бұрын
I didn't think anyone would catch that. Well done!
@Reman1975
2 сағат бұрын
[Random algorithm appeasing comment (All heil the algorithm. 😁)] - When you mentioned "Disaster" I was getting a tad concerned*. I was picturing the outro being one of the gnomes signing your leg cast as a scrap yard truck was loading up the twisted remnants of the Renault in the background. (* Remember that I'm a British bloke, so to help translate that emotion into American, "A tad concerned" is the approximate level of worry we outwardly show when something happens like a gas explosion destroying our house and us being alive, but trapped under all the rubble........ The only occasions where it's acceptable for a British man to go anywhere beyond "A tad concerned" is when a loyal dog's portrayed as getting injured in a film. In that situation we're allowed all the way up to "A smidge sullen" (but only for 15 minutes maximum, and never within the sight of a lady). I once heard about a British soldier who had an outburst on a WW2 battlefield after he got sh0t in the stomach by the Jerry. Apparently he responded to a level that others described as him "Acting frightfully annoyed" as he continued running across no mans land (Rumour has it, he was so annoyed that he didn't even stop at the half way mark for a sit down with the customary mug of tea !). He was court marshalled the following day for behaviour unbecoming of a British gentleman..... The firing squad had to stand in a circle around his hospital bed to sh00t him ! 😲). (PS. I'm going to go now. When I follow two semi serious sentences with two whole paragraphs of stupidity, I know that the (Reasonably strong) painkillers have kicked in, and they're turning my thought processes into porridge again. :D)
@robotcantina8957
2 сағат бұрын
The best comment I have read in a long time! Cheers!
@fm9572
5 сағат бұрын
Have you considered adding a bank of sub-woofer capacitors inline with the positive cable to the starter? I've seen videos of people completely removing the battery in smaller engine vehicles like 1.5 l Hondas and such, and as long as it didn't have to turn for a long period, they could actually just use the energy stored in the capacitors to start the vehicle. I've also seen this used as a sort of booster for putting a lawn mower battery in the same vehicle. If you were to put a bank near the starter, it would allow the battery to be in the same location, and prevent a voltage drop when you hit the starter. Something to consider. Keep up the great work, Jimbo.
@tadamb1
3 сағат бұрын
Top notch entertainment as usual. Keep up the good work sir!
@robotcantina8957
2 сағат бұрын
Much appreciated!
@pappytron
4 сағат бұрын
Eric has Blue...you might as well have Baby Blue. The good thing is Baby Blue is not only a pry bar...but also a chisel/driver. Gotta luv multi-purpose tools.
@nuttyDesignAndFab
5 сағат бұрын
I was totally gonna suggest modifying the decompression with a weaker spring lol! glad I waited. and yes, V-twin noises are the best
@spangledhooper
3 сағат бұрын
Keep up the good work Jimbo.😊
@scotth9881
4 сағат бұрын
I bet that car is a blast to drive. I see the S10 has made it outside to the driveway. The wall of hay was fantastic.
@robotcantina8957
4 сағат бұрын
I drove the S10 the other day. That truck has been a nightmare to resurrect.
@jmorganz3
5 сағат бұрын
I was waiting for Uncle Rodney to come knocking on the ride home!
@robotcantina8957
4 сағат бұрын
Thanks so much! Indeed it was a close call. I think the engine spit out is last drop of oil when I pulled up to the shop
@iainball2023
5 сағат бұрын
I think it's now throwing tons of oil out the new windows in the cam. Are the cam journals pressure fed ? If you have unintentionally opened up a new oil path through the cam, it will also now have significantly less oil pressure in the crank 😮 I think you will need to plug the ends of the cam to stop the oil flowing through the centre. Remember when checking "blowby" at the cap on this, it's swinging two big pistons around at nearly the same time. It will move a lot of air. Cylinder leakage test should show a blown gasket, but I think if you had a gasket gone that bad, it wouldn't run so well. As always, thanks for another great video. A Sunday roast, then settle down to watch this. From 🏴 🇬🇧 with love. 😊
@ScottGrammer
4 сағат бұрын
When he took the balls out, the first thought that crossed my mind was, "you need to seal those holes!"
@lindsaydempsey5683
3 сағат бұрын
I don't know, but I think that that there is no pressurized oil feed into the internal camshaft, all those holes with bits inside them get lubricated by splash lubrication, not a pressure feed as far as I can tell reviewing the camshaft section of the video.
@dioborghezio
7 сағат бұрын
I'm so glad that you know Eric from I Do Cars YT channel (yes, i understand the reference at 7:26)!
@Casitaboys
6 сағат бұрын
This is such a fun series to watch. Thanks for the great content always!
@htimmermans1938
4 сағат бұрын
Robot Cantina and Project farm are great
@prjndigo
5 сағат бұрын
Welp. All you had to do to heavily disable the compression relief was put a weld between the crown of the limiting pin and the gear to block the crescent from fully retracting at low rpm _or_ add a little centripetal weight to the crescent. I'd trust a little weld closer to the center more. I suspect you're going to find MORE problems than the one you had.
@subynut
Сағат бұрын
That is interesting! Looking forward to finding out what is causing the excessive blow-by!
@dannycalley7777
3 сағат бұрын
JB .............thanks for your hard work !!!! ..........we enjoy it .
@PsRohrbaugh
3 сағат бұрын
Can't wait till next week to find out what's going on with the engine!
@robotcantina8957
2 сағат бұрын
Thanks so much!... The engine is out of the car again and I'm digging into it right now.
@gregholloway2656
5 сағат бұрын
Hey Jimbo, at 23:36, it sure looks like the clutch is slinging oil. I was thinking the crank seal was damaged until your breather tube experiment.
@VirtualCryptid
7 сағат бұрын
Love my sundays!
@aac7183
Сағат бұрын
Excellent channel . Look forward to every videp 👍🏼
@timwelsh6904
5 сағат бұрын
Love love watching your videos. Thanks for the awesome content 🫡💪🏼
@robotcantina8957
4 сағат бұрын
Glad you like them!
@airborneSGT
5 сағат бұрын
"The engine bay seems empty" just like me 😂
@justacomment1657
7 сағат бұрын
Going to watch as soon as possible
@JerryWick
Сағат бұрын
I literally have a small vise grip permanently mounted to a slide hammer for those kind of extraction jobs. Works fantastic on shaft keys and roll pins just like that
@ccscomments757
4 сағат бұрын
Enjoying some Cafe Bustelo right now.
@epiphonefish
4 сағат бұрын
I so want to see this car do 1/4 mile at the track, predator absolutely screaming, just to see what a crowd reaction would be!
@StevenIngram
6 сағат бұрын
I really do love this little car. It's got so much attitude for what it is. LOL
@snowdog993
Сағат бұрын
Aww Jim. I wanted a cup from the beginning! Is it on the way to me? I can wish! Great video!
@robotcantina8957
Сағат бұрын
Someday we will think about selling them.
@danielschreier6700
7 сағат бұрын
Nice!
@petertimp5416
7 сағат бұрын
👍👍👍👍🙏😊 that engine is so high performance it need a ‘Catch can’……. Next you’ll be rapping the exhaust pipe and putting in ‘coil overs’ (I don’t know what I’m talking about) (but I enjoy your channel 😂)
@captmuttonchops
7 сағат бұрын
Algorithm engagement comment
@tritonalabaster6269
5 сағат бұрын
Algorithm engagement reply
@TheDistur
6 сағат бұрын
Love a few good vroom vrooms from the little car. Best of luck with the gasket. Just changed one on a lawn mower a couple weeks ago. Those darn Inteks.
@robotcantina8957
5 сағат бұрын
Right on!
@WalkiTalki
5 сағат бұрын
14:16 Attaching a similar feeler gauge to a solenoid "aimed" at the exhaust valve stem/rocker point could be an effective decomp mechanism.
@dangerousdave5915
Сағат бұрын
I love watching this on Sunday AM and just love the back roads of Kansas. How do you get all those cool video shots? Is that the cameraman's work?
@jeeper426
38 минут бұрын
on an engine with that many hours, it could have been the increasing the lash on the exhaust valve to increase the cylinder pressure coupled with the weak starter that did the gasket in, doubtful the camshaft mod itself did it though, likely just defective head gasket, or one that was already stressed from the previous abuse, as you said, simple fix, root causation however is another story, love the project Jimbo, stay safe out there buddy
@UnfinishedProjectDartSport
7 сағат бұрын
Sweet!!
@ncopp4358
7 сағат бұрын
Counter sinking the cam was a good idea 💡
@rjung_ch
6 сағат бұрын
Hey Jimbo, another good one for Sunday from you! Cheers 👍💪✌
@robotcantina8957
5 сағат бұрын
Thanks!
@waltwalton8106
4 сағат бұрын
Great video, I'm another fan of "I do cars" and Ole blue.
@huzudra
5 сағат бұрын
Jimbo! If you rub axle grease into the paper gasket on both sides it won't glue itself to the case or cover, next time you pull the cover it'll slide right off but it'll still seal like new multiple times. Another trick I picked up from Thunderhead289.
@michaelblacktree
4 сағат бұрын
This is something I've been doing for decades. It works great! You don't need much grease, either. A light coat will do the trick.
@coreypuck3295
Сағат бұрын
Another awesome video!
@AverageJoesracingteam
7 сағат бұрын
Crud! Now I'm really curious what's going on with the crankcase pressure, but this is giving me something to think about in a project that I am currently working on
@whatidid9764
4 сағат бұрын
Cafe Bustello, that’s proper coffee 👍 wired like a squirrel on red bull!
@knowone6214
2 сағат бұрын
bet Eric got a chuckle out of the mini Blue reference....LOL
@IllusionInfusion
6 сағат бұрын
Love the "Blue" reference from Eric on IDoCars. Probably going to jump to his new video after this one. :)
@robotcantina8957
5 сағат бұрын
6.0 LS last night.
@tonenuff
4 сағат бұрын
You and Eric should do a tear down…of a lawnmower 😁
@Big_Loo
6 сағат бұрын
Blue always gets the job done.. even Blue Jr.
@jlucasound
2 сағат бұрын
Your engineering is Sublime. I really miss good Hard Lemonade. That brand is gone and I can't drink alcohol anymore. Double whammy, I guess. 😟But I have Jimbo! 😃
@dylanromine4101
22 минут бұрын
That channel is in my que today lol
@mastercricket7626
Сағат бұрын
Right on, jimbo ... and my guess would be that cam were it now has nothing blocking them holes the balls and shaft were in , its causing exhaust gasses to escape into the casing and pop ... jusy a guess .. love the content boss , keep kicking butt 😅... peace and love brotha, keep it rad, stay safe, and build on..l8r famz and keep having fun
@VirtualCryptid
6 сағат бұрын
The shaft and 2 balls comment almost made me wreck my car lol!!!
@robotcantina8957
5 сағат бұрын
LOL, I'm glad you survived that one.
@timothyprice5240
6 сағат бұрын
The Renault is my favourite of your projects so far, and I'm very pleased you're back to it. But I am concerned that moving even a relatively small battery from the extreme front to the extreme rear will damage its stability in cross winds, especially as I seem to recall from an episode last year that it is also missing its spare wheel. Would you consider putting ballast up front when not doing acceleration tests?
@roccocroce
4 сағат бұрын
id love to have one of those coffee cups on my desk at work lol
@bdkw1
4 сағат бұрын
Hopefully there's no malice in the combustion palace.
Пікірлер: 408