In this video I show the detailed disassembly process of removing NG 9-3 (2003-2012) front brake calipers, pads, rotors, wheel bearings, sway bar end links, control arms, struts, and strut mounts. Car shown in video is my 2008 Saab 9-3 Aero with 314mm front brakes and rotors. Non Aero models will slightly differ but will be a similar process for most components. Be sure to like, share and subscribe to see the part 2 reassembly process! Links below.
Strut compressor tool rented from Advance Auto Parts that was used in video: shop.advanceau...
Double check fitment on your particular Saab 9-3 for the follow parts installed in video
1.) Moog brand front wheel bearing. One per side. (#513191): amzn.to/37mp4KY
2.) Moog brand front sway bar endlinks. One per side. (#K80477): amzn.to/3asshKX
3.) Moog brand front strut mounts. One per side. (#K160241): amzn.to/3au2S3G
4.) Moog brand driver side for USA cars front control arm (#RK620570): amzn.to/3auEM96
5.) Moog brand passenger side for USA cars front control arm (#RK620571): amzn.to/3pBVpEc
6.) Raybestos brand front brake pad set for Aero 314mm models (#MGD1257M): [bought on clearance]
7.) Raybestos brand front painted front 314mm rotors. One per side. (#980578): amzn.to/3qxAjI2
8.) Raybestos brand front slider pin set. One set needed per side. (#H5025W): amzn.to/2NCdl4d
Need to know how to change your rear wheel bearings? Click here for that install: • SAAB Rear Wheel Bearin...
Instagram @ weakest of weeks: / weakestofweeks
Feel free to contact me at: WeakestOfWeeks@gmail.com
DISCLAIMER: This video, description, and comments contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Негізгі бет SAAB 9-3 Front End Rebuild: Disassembly of the Old Junk
Пікірлер: 24