I appreciate the integrity. I hate it that when you make 1 mistake, folks tend to discard your future contributions. Good job!
@KenPeriman
Жыл бұрын
@D C wow I really appreciate the comment. I just consider that no one is perfect and I know if you mess up, own up to it and move on. Thanks again.
@DC-rb5yu
Жыл бұрын
@@KenPeriman The ability to successfully address an issue is far more impressive than someone who is far to cautious to encounter one in the first place. Show me a man who never was mistaken and I will show you a coward.
@KenPeriman
Жыл бұрын
@@DC-rb5yu appreciate the comment and a very true statement.
@DannyBlack
3 жыл бұрын
Great explanation... always tough when you screw something up in a review but the video gets you views !
@KenPeriman
3 жыл бұрын
Thank you Danny, I appreciate the comment. Yeah, I just don't like having something out there that is wrong that I said. Thaks again.
@BobsTechLab
2 жыл бұрын
Thank you for the explanation. USB connection types do matter. I have a 2012 Mac Mini which has USB Type A connections. I use an external hard drive with a C connection. In order to connect I use an adapter which is C to A (Female to Male). Works great.
@KenPeriman
2 жыл бұрын
Great info, thanks for the explanation on how yours works.
@beer_goggler
3 жыл бұрын
I don't think anyone is losing any sleep on your review. In fact more of a surprise is you being able to benchmark a HDD caddy in any useful way. The Sabrent is UASP compatible which is much faster than the old BOT protocol, but UASP only kicks in if you have the right drive, the right cable, the right USB port, and OS support. My guess is the adapter is making the caddy look like USB 2 and so it attaches in BOT mode. The only safe way to benchmark is to test each caddy with the same HDD and confirm the caddy is in UASP mode which means poking around device manager.
@KenPeriman
3 жыл бұрын
@beer Goggler, don't disagree with anything you said but bear in mind I am reviewing it as a lay person, not with the knowledge that you have. Agreed that most will not lose sleep over this but I will correct myself if I am wrong. Thanks for the better explanation than I could have done. Awesome. Thanks again and good luck.
@Jime0326
3 жыл бұрын
Thanks for making this video!
@KenPeriman
3 жыл бұрын
Thank you for your comment.
@marshmower
Жыл бұрын
The driver board/adapter/interface can make or break the functionality of it. Phones need more I/O but a stopper would fail and people would lose it. Then the water resistance would be iffy
@KenPeriman
Жыл бұрын
Yep, you're right there
@sherwintongco6879
Жыл бұрын
Your Courage to Admit that your Wrong takes alot of Courage. By the way i have that Problem.
@KenPeriman
Жыл бұрын
Thank you
@alejandrotobienne584
3 жыл бұрын
Any point of connect where it breaks or connects connection. You will see slow speeds. The hub isn’t powered so your using 5v across all hubs and extensions
@KenPeriman
2 жыл бұрын
You're right
@bingao4491
3 жыл бұрын
hi, I just got the enclosure from MicroCenter, but it did not work with an Inland SSD, I tried two SSDs, all got the same problem (not recognized in disk management tool and in command line), but when I used another Insigna enclosure, both SSD worked fine, any idea why this Sabrent 2.5 enclosure EC-UASP not working with SSD?
@KenPeriman
3 жыл бұрын
@Bin Gao, I don't understand why it wouldn't work it should work uess it's over 2TB. If it's larger it may not work. It's one of the requirements in the specifications.
@guinnessme
2 жыл бұрын
I see that both enclosures have different power cable connectors ..any advantages between them ? thanx
@KenPeriman
2 жыл бұрын
One is USB Type-C to Type-C and the other is Type-A to Type-A. The only advantage is that type C can be faster if your drive is also very fast (read SSD). So if I were to chose and since the computers nowadays are moving to Type-C, I would take the Type-C over the Type -A👍
@alejandrotobienne584
3 жыл бұрын
As for speed. It plays PS4 games just fine. If it can do that it’s efficient
@KenPeriman
3 жыл бұрын
Awesome to hear.
@robertor6564
2 жыл бұрын
Does it need to be charged at any point? I have one a couple of years old and today light did not turn on and not recognized on computer. Did i lose everything on it?
@KenPeriman
2 жыл бұрын
No sir, I am sure they dont need to be recharged. it uses power from your computer to run the hard drive. The best way to find out if its the enclosure and not the hard drive is to get another enclosure and test it. if it too dosnt work then the hard drive may be the culprit. But, if you have a spinning hard drive you shouild at least hear something from the drive like the hard drive spinning up. Anyway check it on another enclosure and see, maybe the enclosure is bad and the hard drive is okay? but not sure as I have not seen it. hope this helps some.
@stephenstandirdge6505
Жыл бұрын
if I put my old laptop hard drive in this can i delete everything and start a new one. It has windows 10 on it and i want to reload it.
@KenPeriman
Жыл бұрын
Stephen, just to be sure, I do not work for the company I just reviewed what I bought from them. now, to answer your question...if you don't care about what is on the old drive and don't need the data or information then yes it should be fine to wipe it clean and then just use it for data storage for another computer. Otherwise, no.
@T-REX_-ww2hm
3 жыл бұрын
okay i need some big help what internal hdd can i use for storing apps and games and will this be compatible with any pc internal hdd or game console internal hdd?
@KenPeriman
3 жыл бұрын
So, @Tyrannosaurus 1993, this is a big question. First off, I'm not an expert in your specific question but I'm happy to help. So...what are you trying to do? I mean, are you wanting an internal hard drive to use like I just did for an external drive or are you looking for an internal drive. And, if this is an internal drive, we'll. That's up to what type of computer your have ( mini tower, laptop, game consel...). Now, in your question if you are referring to just storing data like games and apps data then anything is compatible. If it's more gaming then I strongly suggest an SSD so that your data moves much more quickly compared to a spinning HD.
@T-REX_-ww2hm
3 жыл бұрын
@@KenPeriman thx basically i want to use tht ur reviewing with any internal hdd from a game console or pc tower etc.. and use it on my xbox one s
@KenPeriman
3 жыл бұрын
Ok, then yes, if you can format it and it ha s the same connectors then you're good as far as I know.
@alejandrotobienne584
3 жыл бұрын
2.5” up to 4 TB works great as an external drive for PS4
@KenPeriman
3 жыл бұрын
@@alejandrotobienne584 thanks for the support in this answer.
@alejandrotobienne584
3 жыл бұрын
This case is awesome due it doesn’t come with a Harddrive but allows the use of multiple drives vs having to buy a WB external. I love this case.
@KenPeriman
3 жыл бұрын
Agreed, now that I know that it was my mistake, it works great.
@ill3go
2 жыл бұрын
I have this hard drive enclosure and a usb a to a I bought and when I plug it in I can not make it pop up in my devices idk what I’m suppose to do
@KenPeriman
2 жыл бұрын
Hey there, this is a dumb question of mine but did you flip the switch on the case? If so the check your cable and possibly get a new one.
@ill3go
2 жыл бұрын
@@KenPeriman I did flip the switch and I’d assume it wouldn’t show up I’m devices and printers without the cable and even worse I realized it’s suppose to make a noise the light comes on but no noise and when I try to partition it it says error with hardware idk if my enclosure is junk or if it’s my hard drive I just want the songs I did on there and my kids pictures off of it
@KenPeriman
2 жыл бұрын
@@ill3go wow, okay, you're doing the right things and you're right, not sure if it's the enclosure or the actual HD. But if the HD was working before then maybe it's the enclosure that may be bad. If there's no light and no sound at all it's probably the enclosure. Get a replacement and check it out.
@275Vet-RLTW
2 жыл бұрын
Dude 12 min in and your still circling around how your adapter throttled your transfer rates and still haven't outright said it. I feel like it's being explained to a 3rd grader!
@KenPeriman
2 жыл бұрын
Thank you and you are right, this video was intended to explain this for someone that may not have a decent understanding of how this works and may not realize that this was the culprit. Additionally, this was one of my earlier videos and I too have realized that I need to be more concise and get to the point quicker. But for you it was easy to understand and I appreciate this. From one Vet to another thanks for the corrective criticism.
@275Vet-RLTW
2 жыл бұрын
@@KenPeriman I'm sorry if I was harsh. I appreciate the info. Best wishes to you. Thank you for your service brother
@KenPeriman
2 жыл бұрын
@@275Vet-RLTW no sir, it right on and I do have a tendency to go on. I'm working on it. I'm getting better and good criticism helps. No harm no foul. I played enough ARMY to not let words hurt me. All good brother.
@simontate1382
Жыл бұрын
oh
@KenPeriman
Жыл бұрын
Thanks.
@jimmydandy9364
2 жыл бұрын
Made in China flimsey crap - flimsey construction, breaks easily, fails quickly, everyone I know who has this has had issues, from random stalls, corruption of drive, disconnects, to internal connector breaking after a few uses, lot of poor reviews also on amazon.
@KenPeriman
2 жыл бұрын
Totally could understand and in my case it has not cause me too much of an issue but as we all know, sometimes something ends up working for a few when fails so many. Thanks for your point of view on this.
@jimmydandy9364
2 жыл бұрын
@@KenPeriman I have 1 x 1TB original + 1 x 1TB drive, both were in my Vantec Dual dock, was making a backup from source to destination - I used to do that all the time before with separate single enclosures without issue - during backup disconnect and stall, the issue is with the dock not windows, those dual docks SHARE both slots to a single chipset, I wonder if there is a case for a class action suit against Vantec. I spent an entire day today recovering data from a messed up partition and I'm not done yet. NEVER AGAIN will use dual docks for cloning or backing up. It's funny I've used so many USB3 enclosures over the years, some 24/7 on, never had a single issue, I wonder if the sharing of controller resources on dual bay docks are an issue - I know that Vantec has had many issues with quality control, there are countless tories of people having their drives destroyed, by Vantec docks, Wavlink, WEME, ORICO and others. I wonder if the professional docks costing hundreds of $ have this issue, if they use individual dedicated chipset for each bay as opposed to sharing. When you disconnect it will disconnect both bays, it's absurd - You may not have had issues now, but it's a matter of time WHEN, they will happen eventually especially if you use dual bay docks and use both at the same time for read / write operation. Amazon stopped selling them for some mysterious reason, you can only buy them now directly from VantecUSA. As far as Vantec ENCLOSURES, never had issues with those, under torture loads, only the docks. and this is a known issue, not a bad unit.
@BrentHawkins
3 жыл бұрын
1101 is the answer. FLEE
@KenPeriman
2 жыл бұрын
Ha
@The_Digital_Arts_World
Ай бұрын
TL;DW
@KenPeriman
Ай бұрын
@The_Digital_Arts_World Thanks for the comment. This is one of my earlier videos, and I was trying to get better at making videos and also while trying to be as honest about my situation. I agree it's a bit long, but all I can say is I am trying and getting better (I hope) each day I do this. Have a great day to you sir.
@The_Digital_Arts_World
Ай бұрын
@@KenPeriman If I may without making assumptions that you might not already, write up cue cards on the PC screen to guide the script keeping it it in mind to be short, sweet and succinct. The things like constant switch back and forth showing USB C and USB A connectors, out of focus and turning around and repeating it again with the cases was overkill. Say the drives use these interface cables, showing the cable ends once, then moving to the issues of cheap connectors as a cause of the poor performance with the snapshots of the bench test should have been sufficient. I tend to run on as well so I cue up the what, why, and how’s and keep the info short and to the point. Think of your listeners of have a short attention span which most people are because they are always in a hurry to get the info they need and don’t really want to listen to banter. You remember show-and-tell in school? Use that as the guideline. We were great at cutting things short in those days even though most of it was not liking an embarrassment or audience. 😂 Whatever you do … KEEP WORKING AT IT! Much of it boils down to knowing your audience and why they came to your channel. Example, the research I was doing to decide if I wanted to buy one of these enclosures knowing that they might work well over the scratches they will accumulate. Mentioning connectivity issue, especially with Macs that like to blow your shorts off by improperly dismounting themselves. Good Luck with the channel and reviews. Hope I have helped in some way without ruffling any feathers.
@KenPeriman
Ай бұрын
@The_Digital_Arts_World sir, if you might look at some of my more recent videos, I am using a teleprompter. I have made my videos shorter and more to the point, at least for me, and now my videos are around 5 minutes or so minutes. Thanks again for your constructive criticism. I appreciate it.
Пікірлер: 55