How to rig a sailboat- New Head Stay replacement on Profurl Roller Furler - Trust a Rigger? Patrick Childress Sailing Tips presents how to Replace Headstay inside Roller Furler, and important information about Profurl Extrusions. Can you trust a rigger to do it right? We put on a new headstay and take apart a Profurl Roller furler drum and remove all of the Profurl extrusions, reassemble the mechanical end fitting and the whole roller furler unit, in the water, with the mast still standing! Replace sailboat rigging yourself with sailing videos like this one! Sailboat rigging Replacement is important! There are many sailboat rigging tips in this video by Patrick Childress Sailing! sailboat rigging replacement is a good diy skill to have before you ever leave on your Bluewater Sailing adventure!
It was our fault...we had damaged the Profurl extrusions. We had trouble raising and lowering the headsail, and the luff of the headsail was being ripped to shreds. But could we trust the Rigger to take apart a Profurl drum, install a new head stay , inside of a Profurl Roller Furler unit, including the drum and extrusion/foil and properly re-rig the entire headstay, while the mast is still standing on our blue water sailboat? This became a DIY rigging project quickly.
This video covers what we did wrong to cause the trouble, and what we did to fix it all, DIY, and since we dissassembled the entire roller furling unit and extrusions, we put in a new headstay re-using our Norseman terminals mechanical end fittings. Here are the sailing tips and tricks of reRigging your Sailboat on the Sailboat
Please, start your Amazon shopping here: here: amzn.to/2K9MmuA
DISCLAIMER
All information, images, statements, and comments are published in good faith and for general information and entertainment purposes only, and we do not make any warranties about the completeness, reliability and accuracy of this information, not for any product or technique displayed. Any action you take upon the information you find on our website or channel is strictly at your own risk, and we will not be liable for any losses and/or damages in connection with the use of anything seen or heard.
✘✘ MY CAMERA GEAR ✘✘
amzn.to/2E5N5Ig
amzn.to/2E4YLei
▬▬ FOLLOW ALONG! ▬▬
✩Instagram: / svbrickhouse
✩ Twitter: / sybrickhouse
✩ Facebook: / svbrickhouse
✩Our blog: :www.WhereIsBric...
✩KZitem: / patrickchildress
Wish we were on Patreon? We aren’t...but you can support us in 5 other ways:
🍯(Tip Jar) whereisbrickhou...
⛵️ TWO FREE SAILING COURSES: whereisbrickhou...
⏩ Amazon shopping here: amzn.to/2K9MmuA
⏩ West Marine Shopping here: www.jdoqocy.com...
✩Tshirts and other: www.WhereIsBri...
*As an Amazon Affiliate, I may earn commissions on qualifying purchases, as well as from other affiliate links listed on this page*
Best Sailing videos #21
Subscribe to our blog at www.WhereIsBric...
Norseman terminals and Norseman cones are not produced anymore, but you can get the aftermarket Norseman cones here: amzn.to/2EcMsNw
Here is the proper Loos Tension Gauge, like the one we used, for a sailboat with 9/32", 5/16", or 3/8" rigging wire sizes:
amzn.to/2QOcX2i
The Profurl Furler Made for Bluewater Cruising Sailboats:
www.jdoqocy.com...
Profurl Furlers www.profurl.com...
*As an Amazon Associate I earn from qualifying purchases*
Two FREE Sailing Courses: www.nauticed.or...
Follow the Boat is another great sailing channel who we admire and respect. Their How to Sail Videos as well as their destination videos are always great sailing videos!
#PatrickChildressSailing #Valiant40 #sailboat #Sailing #Sail#Rigging
Негізгі бет Sailboat Rigging-How to Rig a Sailboat-DIY HeadStay Replacement on Roller Furler-Patrick Childress21
No video
Пікірлер: 195