Yes you can. The foam bodies are also available in different shapes and sizes that are better suited to freshwater species, the build techniques are exactly the same.
@tightlinevideo
12 жыл бұрын
Yes! Hopefully this fall if all goes according to plan. Jersey shore and maybe Cape Cod.
@AngryLS1
11 жыл бұрын
If you find while using epoxy that your flies have rough spots and bubbles, switch from 5 min epoxy to devcon 2 ton. Takes a while to dry but looks much better. :) great tutorial. I cannot wait to try it out.
@metiefly
11 жыл бұрын
Fantastic - thanks again for your great tutorial. Great handiwork!
@tightlinevideo
11 жыл бұрын
You absolutely can. They look a little different that way, like they've been put on later, but still fine. You still really need to watch out for the edges lifting.
@alienxyt
11 жыл бұрын
Really cool. I Used to make popper like that out of cork when I was a kid.
@ThomasR099
11 жыл бұрын
Very thorough, a joy to watch! i'll be trying my hand at some poppers i think :)
@mistiromoon
8 жыл бұрын
Well done! Very nice!
@MrSportsphoto
5 жыл бұрын
Very cool!
@sabiangriffin3713
2 жыл бұрын
The copic airbrush system is quite affordable, only about $35-$40. However, the copics themselves are not. They are high quality alcohol markers. A 12 pack is about 100 bucks. You can buy other not great alcohol markers for really cheap, but copic is the orvis of markers
@papajuanxxlll
10 жыл бұрын
Yes it is an addiction,,,lots of Poppers,,thanks
@KirkDiet
12 жыл бұрын
Tightline, great looking poppers. I find that the Copic is tacky for a couple few hours but dry pretty solid after that. I'm no chemist but seems like alcohol would evaporate even on a slick surface. I coat my hard foam poppers with Gesso and then give a coat or two of acrylic paint in Metallic Pearl color. With the transluency of the markers, the sheen of the metallic pearl gives a nice effect to the bug. Don't know if its these base coats or not but I haven't had a problem with the drying.
@seanmooney3907
11 жыл бұрын
I really don't understand why you cannot wait until after the 5 minute epoxy to put on the stick on eyes, and then cover them over with more when you attach the tail. It seems a lot of work to put them on and tape them. Just a thought. All the best, Sean
@flyfishjones
12 жыл бұрын
Are you gonna make some salt-water fishing videos soon? I'd love to see that popper in action.
@aselarodriguez3441
8 жыл бұрын
.
@danz2994
9 жыл бұрын
nice popper... looks way better than mine ended up but it definitely worked... although it is a pain in the ass to cast.
@chchecortez6604
7 жыл бұрын
wooooowww estupendo trabajo saludos ¡¡¡
@Posavina985
8 жыл бұрын
Hello Nice video. i like it verry much. wich airbrush do u use? price? where can i buy it? greetings from Sweden
@herbkettlehutjr9674
5 жыл бұрын
Great looking popper. Do you think a scooped out face is useful or is to hard to cast?......Thanks
@AnglingAddictssrilanka
3 жыл бұрын
would this popper have enough weight for casting?
@gravityalwayswins1434
3 жыл бұрын
Dynamite 2 part tutorial tlv. Thanks alot
@carlosasosa4293
6 жыл бұрын
Wowww very nice! Would you sell them ? We don’t have anything like that here in Mexico
@mauricebrown9094
9 жыл бұрын
do you have to use some sort of primer for the popper bodies first., before your color coats?? I don't want it to soak in and look like crap.. thankyou ...
@andyost4906
4 жыл бұрын
Top 👌👍✌
@leegriffin1229
12 жыл бұрын
Were did you getting that spraying setup from? Looks good!
@timeflies2550
2 жыл бұрын
Where can I buy some already made poppers??
@MicahsArtShack
11 жыл бұрын
can you use it in fresh water for pike,muskie, and bass
@cobone04
5 жыл бұрын
Why not put the eye's at the end of the painting.?
@beekeeper1988
9 жыл бұрын
Can you give me a link to the poper bodies and the rest onf the materiasl that you sed in finishing them. Thank you
@andrewkaiser6170
8 жыл бұрын
I bet you could use uv cure resin for the body finish
@tightlinevideo
8 жыл бұрын
I've tried it and it works quite well. It however is way to expensive to be practical for covering such large areas as a popper (at least for me). I'll stick with epoxy until I win the lottery.
@darko7318
6 жыл бұрын
Where can i find those poper bodies and that painting things
@mauricebrown9094
9 жыл бұрын
where do you get a painting system like that these days ????
@mauricebrown9094
9 жыл бұрын
Maurice Brown that's ok I found one
@kzookid2051
6 жыл бұрын
Google search pulls up a good number of sources, as well as Amazon, Ebay and many local art stores. For those who didn't find one three years ago. ;)
@bassattack939
11 жыл бұрын
Where did u buy the paint sprayer
@bennyrosado5402
5 жыл бұрын
yes very additive lol!!!
@ardush1
6 жыл бұрын
how much grams whey are?
@joshyoung1623
10 жыл бұрын
........umm eyes on last? this would be a TON simpler
@spanky8532
10 жыл бұрын
Ummm.... The eyes wouldn't adhere as well on a painted surface versus on the actual foam....
@joshyoung1623
10 жыл бұрын
im sure with Loctite or zap a gap it would adhere just fine.
@samerckenbrack
11 жыл бұрын
Why didn't you paint it then put the eyes on that would have been so much easier
@bassmember876
11 жыл бұрын
look on ebay
@RustyShacklefardd
5 жыл бұрын
Shoot I’d start selling them if I invested that much
Пікірлер: 45