I got the frame without the buttons. But it was really easy to transfer, to the new frame ( just be gentle and apply a little heat to unstick) and it works. Thank you for the breakdown, it helped me a lot. Edit: I didn't have a heat gun. Used a blow dryer on low setting.
@DIYGeardo
2 жыл бұрын
Great and thanks for sharing
@104jewels.
2 ай бұрын
Just replaced the battery/screen on my moms A11 phone watching this step by step.. Thank you ♥️♥️♥️
@davidcameron1378
2 жыл бұрын
I did this and it worked. Had a lot of mistakes but ultimately have a working phone again. Had to install buttons in the new frame. One screw did not want to go back. Finally all screws went back and everything works again. I watched this so many times! Was very helpful. Thank your!
@DIYGeardo
2 жыл бұрын
Glad you got it done.
@davidcameron1378
2 жыл бұрын
Thanks @@DIYGeardo. My son promises to take better care of this one.
@ivanskaggs6284
Жыл бұрын
how did you get the button installed?
@davidcameron1378
Жыл бұрын
@@ivanskaggs6284 the buttons are not much more than a sticker. I ordered them off of Amazon and carefully applied it to the frame to match the original.
@MindfulMusings1
6 ай бұрын
For those who were able to buy frames with buttons, where did you purchase your frame & screen combo? We bought a set and the innards didnt fit because it wasnt up to standard sizing. Sent back and looking a new combo.
@WRod1464
2 жыл бұрын
Awesome video, fallowed all the steps. One thing wasn’t covered, I had to remove the strip for the power and volume bottoms from the old case. The new one did not have it. But all worked out, wife is happy. Thank you so much for the video.
@DIYGeardo
2 жыл бұрын
Thanks for the message. Normally Power button comes with the frame. But sometimes it may not. But anyways, glad you got fixed the device.
@ronnieandaya5850
2 жыл бұрын
Sir how did you transfer the power button to another frame?
@DIYGeardo
2 жыл бұрын
@@ronnieandaya5850 sorry we miss that part, normally it comes with the frame. Can you check our a12 screen replacement guide. You can follow that to remove the button flex
@ronnieandaya5850
2 жыл бұрын
@@DIYGeardo thank you sir
@dominickwiley4727
2 жыл бұрын
Bruh, if it wasn't for this comment, my cousin would be ordering a new phone by now. You're a lifesaver!
@rotigaming9077
3 ай бұрын
Excellent video much better than other videos how to replace display
@DIYGeardo
3 ай бұрын
Thanks for your feedback..
@davidcameron1378
6 ай бұрын
I followed your video again. This time accidentally disconnected one of the antenna wires from the tiney snap it is crimped to. But soldered it back after much cursing under my breath. The phone is fully functional again. Many thanks!
@elikamil7651
Жыл бұрын
thank you very much for the good tutorial sir..
@DIYGeardo
Жыл бұрын
You are most welcome
@arfnzr_
Жыл бұрын
Sir both use same lcd and frame body? I wanna change my lcd n frame body but seller say a11/m11 do the both same spare parts? ?
@plasticsman10
Жыл бұрын
You sir are a genius. Thank you for this video.
@DIYGeardo
Жыл бұрын
Thanks for your feedback
@ILoveGTAV
Жыл бұрын
I'm watching this on samsung galaxy a11
@DIYGeardo
Жыл бұрын
Great
@glenjamin7
11 ай бұрын
Thanks for a great video. You helped me out much friend.
@DIYGeardo
11 ай бұрын
Glad I could help
@TikTok143
7 ай бұрын
Thanks..new sub for a very detailed and informative video. Keep it up mate.
@DIYGeardo
7 ай бұрын
Thanks, will do!
@lexisj1825
6 ай бұрын
Why after fixing the screen speaker don't work? What cause the speaker to stop working?
@haydenhartman2038
2 жыл бұрын
The heat gun link only shows a soldering kit, is there another part needed to switch the soldering tip to a heat gun?
@karmen9514
11 ай бұрын
Did it and it worked at first but i forgot the buttons. Now the screen just flashes on then off😢
@MindfulMusings1
6 ай бұрын
Were you able to take it apart and readd the buttons?
@xxliving_tribunalxx1908
2 жыл бұрын
1:05 Does any type of heat gun work? 10:12 Does any type of super glue like gorilla glue work for it? I'm just curious because I wanna make sure I don't screw up the button at all.
@DIYGeardo
2 жыл бұрын
Most likely yes , do not use super glue or strong ones..
@codyvilleneuve2181
Жыл бұрын
Use a hairdryer
@nicolaspopoca2041
2 жыл бұрын
Wow it work
@DIYGeardo
2 жыл бұрын
Great..
@alldogsgoheaven
2 жыл бұрын
Where did u buy tools n screen???
@karmen9514
11 ай бұрын
Could the issue be that i accidentally knocked out the other connectors when the battery qas attached? If so will a another new screen work? Already took it completely apart and tried putting it back. It booted up then turn off. Or did i ruin the battery? Just trying to get it on to get photos.
@myriamavila481
Жыл бұрын
Excellent video! Geardo; Do you have the part number?
@DIYGeardo
Жыл бұрын
What is your phone model number?
@aliciacruz4509
Жыл бұрын
Can be done without dissable?
@oliverxe7354
2 жыл бұрын
wow Impressive
@DIYGeardo
2 жыл бұрын
Thanks for your feedback
@Angel-vm7sl
2 жыл бұрын
Is this the same as modle: SM-S115DL (GP) trying to figure iut if this is the A11 for getting the right screan to replace looks exatly like the one in video taredowen
@DIYGeardo
2 жыл бұрын
Yeah should be the same..so far there is only one screen type for this model
@christ1stjessicaramirez133
2 жыл бұрын
Can I use a Blow dryer?
@DIYGeardo
2 жыл бұрын
Yeah, can you control the heat?
@notjinyu
Жыл бұрын
@@DIYGeardo my can
@athindwalane4124
2 жыл бұрын
Help. My phone had a broken screen asked a guy to have it fixed came back with mic not working, people can only hear me on loudspeaker. A day later it went black but works typing from it as we speak but it's dark with no light.
@DIYGeardo
2 жыл бұрын
So looks like your ear speaker got damaged.. you need to replace that...And regarding the screen, seems it is faulty unit or something went wrong in the repair job ( i cannot say 100%, just can be due to the faulty ear piece too). Talk to the tech, this should be an easy fix..
@lexisj1825
6 ай бұрын
I replaced two of these and the speaker wont work in both cases. The speaker is not broken, there is something wrong with moving the speaker to another assembly case. Next time I will replace only the screen without disassembling the unit.
@trainman1209
5 ай бұрын
I'm here to change the screen protector. What's all this disassembly in Indian Language?
@DIYGeardo
5 ай бұрын
This is changing the screen display, not the screen protector.
@alldogsgoheaven
2 жыл бұрын
... My phone started getting warm n heating up physically so I put it in the freezer of the fridge for 1 minute n then took it out of the freezer n then the screen lights went out on my phone but my phone is still on like it gets messages but the screen doesn't want to show any pixels it's just pitch black... will this video fix the pixels to turn on or does this video just help wt broken glass cracked screen repair type of vid????...... I'm using an iPad to write this comment bcuz my galaxy a11 doesn't wanna turn tha lights on tha screen... it makes noises like I got a message n I can higher tha ringtone n stuff but I cant see anything on my screen
@DIYGeardo
2 жыл бұрын
what you can do is , open the phone and disconnect the battery plug and the lcd plug..Reconnect it and make sure connections are secured..turn on the device, if you still have the same issue, then you might need a new screen to test the issue.
@bbibbifairyheart2812
2 жыл бұрын
I have m11 and i want to replace it with a11 screen and frame is it possible?
@DIYGeardo
2 жыл бұрын
Steps are almost identical, but the frame is slightly different..
@bbibbifairyheart2812
2 жыл бұрын
@@DIYGeardo ok thanks
@mxolisisiyabonga8348
2 жыл бұрын
But I need new screen for Samsung Galaxy A11
@mxolisisiyabonga8348
2 жыл бұрын
@@DIYGeardo But my phone need new screen for Samsung Galaxy A11
@Flam3Emp3ror_Sabo
3 ай бұрын
i think i took out the battery wrong... lol while i was taking it out i saw a red thing so
@shaminelanburns2002
2 жыл бұрын
I cant find an M11 screen in my area. is it possible to fit an A11 screen on my M11?
@DIYGeardo
2 жыл бұрын
Not compatible
@shaminelanburns2002
2 жыл бұрын
@@DIYGeardo Actually, some replacement screens from A11 may work as there are different models of this phone. I recently found out for myself as I couldnt find any m11 screens which lead me to try the a11. If anyone out there decides to try an a11 for an m11 or vice versa, make sure you are able to return the replacement screen before taking the risk.
@northernlights9637
Жыл бұрын
So basically you take the whole phone apart ...no thanks
@DIYGeardo
Жыл бұрын
If you get part with the frame, then yes, but without the frame No, but most ideal repair part will be screen with frame. Also a11 is fairly easy device to repair
Пікірлер: 68