Thank You! This was really helpful as most of the videos out there only show how to replace a screen that comes with a frame.
@justaguy4real
Жыл бұрын
I hope you didn't remove all that
@dalestevensnz
Ай бұрын
"me no good at english? that's unpossible" Thanks for the vid... got delivered a screen without frame (not what I ordered), so was a bit lost until I watched this :-)
@gageturner3274
2 жыл бұрын
Keep up the good work I appreciate you bring knowledge to my generation
@callummoore5124
2 жыл бұрын
Just wanted to drop a comment and say thanks for the video. Very informative. I hope you get more views!
@fixologytechrepairs
2 жыл бұрын
Appreciate it very much. Spread the word!
@gamer1d244
Жыл бұрын
❤❤super useful worked soo far, haven't put the screen on yet
@Shona632
2 жыл бұрын
Hi thanks for this video. Most of the other videos only show the screen "with the frame" replacement. I have done similar repairs but there was one LCD I replaced without the frame on a different model. And the issue I came across was that the adhesive did not stick the screen to the frame properly so there was a gap and so the LCD light shining was seen through the gap on one edge. I need to seal it tight so that moisture doesn't get in. I will be attempting this screen replacement tomorrow. Any tips?
@fixologytechrepairs
2 жыл бұрын
Sorry didn't expect a comment on the video. I would use about a 5 pound or 10 pound weight applied to the screen after its been heated for about 5 minutes or so. Hopefully after it cools the adhesive will stay in place.
@jgabt
Жыл бұрын
Great video! For assembling the display, do I need to apply glue or just pressure? wouldn't it detach when I return the parts?
@fixologytechrepairs
Жыл бұрын
For the screen itself normally there is some adhesive on it. For the other components like motherboard it's a couple screws and pressure from the frame assembly.
@anussqadeer3181
9 ай бұрын
What is the difference between with frame and without frame?
@dairesheridan3462
Жыл бұрын
Hi, great video! Thanks. What glue would you use if the replacement screen doesn’t have it on already?
@fixologytechrepairs
Жыл бұрын
So I never use glue on screen replacements. Generally a big no-no because it will get into places you don't want it to. I would recommended a thin double sided adhesive like Tesa tape. If it is a style like the A series I would then try and put it onto the frame before trying to put it onto the backside of the screen.
@ncedoyozi9345
Жыл бұрын
I used TG 7000
@Kmillerogborn
2 жыл бұрын
You saved me! I didn’t realize I ordered the one with no frame, but your video saved the day. Now if I can only figure out why the front facing camera is red 🤦🏼♀️
@fixologytechrepairs
2 жыл бұрын
Try replacing the camera. Could just be bad it is a small, fragile camera
@dillinguuur79
Жыл бұрын
Same lol 😆
@mirembemargie4415
2 жыл бұрын
You've won my subscription
@fixologytechrepairs
2 жыл бұрын
Thank you sir!
@mirembemargie4415
2 жыл бұрын
My screen is broken and one part doesn't sense.which screen can you recommend? The one with frame or no frame. I need to try it myself.
@fixologytechrepairs
2 жыл бұрын
The screen with the frame would make the repair much faster and easier but they are a bit more expensive. I would say they are around 30-40 dollars. Otherwise if you are pretty savvy with repairs the frameless screens are around 20ish dollars. They are just a little more difficult to do.
@escan8662
Жыл бұрын
I have a question... Hopefully it can be answered. How would you know if you are to replace just the LCD without the frame or the LCD with the frame? For my case my phone (A20) have suffered a major drop, and it bled purple in screen. But it still can charge. So what should I replace it with? Without the frame or with the frame? Thank you!
@justaguy4real
Жыл бұрын
Without frame. Read my comment "newest comments" as i just posted it.
@escan8662
Жыл бұрын
@@justaguy4realWithout frame! Thank you! Any online store would you like to recommend? I am a bit wary of Chinese version of the screens I see online.
@justaguy4real
Жыл бұрын
0:28 wait hold up, "just to get to that point". Isn't all that unnecessary to replace screen only? No need to remove battery either. That's all overkill. Just need to separate the screen from frame housing and cable thru the hole 'over' the battery (unlike other phones like mine), and the cover for the connector board to get to the short flex cable.
@Guinevereegba117
4 ай бұрын
Can you Chance only the touch screen without changing the lcd screen
@mirembemargie4415
2 жыл бұрын
Which alcohol is that?
@fixologytechrepairs
2 жыл бұрын
Isopropyl 91% alcohol. The higher the percent the better.
@davidhughes769
Жыл бұрын
I need to replace the screen on my son's phone but it's not a A125F The number I'm getting is M127F and I can't find a matching screen. any suggestions please
If I can find one I would be more than happy to do so.
@devjoshi2726
Жыл бұрын
Bhai skrin ka kitna price hai
@fixologytechrepairs
Жыл бұрын
mainne ise lagabhag 20 yooes dolar mein paaya
@devjoshi2726
Жыл бұрын
@@fixologytechrepairs are bhai price kitna hai ye bta de bhai
@capju854
Жыл бұрын
not same as other samsung galaxy a 12 phone, ??
@fixologytechrepairs
Жыл бұрын
If it's a Galaxy A12 with the model number SM-A125F it should be exactly the same. If it's the international version I think the only difference is the SIM card reader is a different style.
@Eatyourmeat1
2 жыл бұрын
my new screen is not fitting, what should I do?
@fixologytechrepairs
2 жыл бұрын
Verify it is for the model of phone you are working on. Oh check that the flex cable for the screen is going all the way through the hole to the other side.
Пікірлер: 40