Hello all! 👋 To purchase Whitestone Dome screen protector that featured today check out the links below: 👇 Whitestone Dome Screen Protector - Twin Pack - For Samsung Galaxy S22 Ultra: www.mobilefun.co.uk/whitestone-dome-screen-protector-twin-pack-for-samsung-galaxy-s22-ultra-88134?referer=P&Whitestone_Dome_Installation_Samsung_Galaxy_S22_Ultra_28022022 Check out more accessories for your Samsung Galaxy S22 Ultra click here 👉 www.mobilefun.co.uk/samsung/galaxy-s22-ultra?referer=P&Whitestone_Dome_Installation_Samsung_Galaxy_S22_Ultra_28022022
@JC20XX
7 ай бұрын
Note that new ones are slightly different but the video still helps.
@dootie2009
2 жыл бұрын
I just applied this screen protector on 2 devices and I was shaking so bad I thought the shake alone was going to ruin the installation. I'm happy to say that both turned out perfect! 🥰
@melymendez8171
Жыл бұрын
? Your fingerprint works in this protector ? Info pls
@thatbluefa5913
Жыл бұрын
@@melymendez8171 Yeah it still works for me
@LolekBezBolkaShow
2 жыл бұрын
Awesome screen protector. I had a cheap plastic foil installed for 2 weeks and I couldn't get used to it. There was that "sticky" feel to it, like a rubber of some sort. I had Whitestone Dome on my previous phone, Galaxy Note 9 and you cannot go to cheap film screen protector after that. The silky smooth, glassy feeling of this tempered glass is a night and day difference. Spend the extra money and time to install a proper good screen protector guys. It only costs 30 quid on Amazon and it will protect a 1300 pounds device display for years.
@Zoroaster4
2 жыл бұрын
Quid is such a better name for money than dollars or cents.
@michaelsanders5938
2 жыл бұрын
I used your video to install screen protector. I can honestly say your guide is the best I came across. Thank you!
@mobilefun
2 жыл бұрын
You're welcome! 😀
@nicokane6992
2 жыл бұрын
just installed mine, honestly terrifying. First time tempered glass screen protector, luckily all seems to have went well first try. thanks for the vid.
@mobilefun
2 жыл бұрын
I was the same but I think the key is just taking your time 👍
@bobciolino6907
2 жыл бұрын
This is by far the right way to do this. I have seen other Installation videos that are incorrect.
@tsipantziGMAIL
Жыл бұрын
Followed your instructions and it worked great the very first time, though I have to be more careful about putting the jig on a very level surface next time.
@laramiejordan4494
Жыл бұрын
I found putting this protector on very fun...I kinda wish I had more phones...I find the uv light to be very handy as I have other uv glues I use for fishing so this light will get more use...I wish it would just stay on but I'll deal with that...but overall what a great product
@nicknikes1557
2 жыл бұрын
Thanks for being so thorough I explained this even better it was a British person thank you
@dlscott1111
2 жыл бұрын
Well done. Spot on. Followed your directions and perfect install.
@janlemmens-sn8km
Жыл бұрын
Bedankt voor deze heldere video. Ik zou het anders geen nieuw protectiescherm kunnen plaatsen hebben. Helaas heb ik nog wel een vlakje van 1 x 0.5 cm dat niet is 'gekleefd' onderaan het scherm, maar ik kan er mee leven. :-) nogmaals bedankt !
@sarahollis9482
2 жыл бұрын
Thanks so much for this video, made the process super easy to follow. All went smoothly (after the first false start - turns out my table wasn't flat. Oops.)
@geo1667
Жыл бұрын
My personal experience with this screen protector, it lasted about a week before cracking. It was only in my pockets isolated keys and other hard objects and never dropped so not sure what happened there. Was also not very good with the fingerprint sensor even after reconfirguring it. Also, the cable that came with the UV fixture was also bad on my unit, so I would recommend having a spare or testing out the lights before getting started. Will def. be sticking with the cheapo screens
@swiftblaqness
Жыл бұрын
Exactly I'm surprised by how many chumps are the comments praising them. I've had two of these screen protectors on my S22 ultra... One cracked within a week the other didn't even make it a day. Clearly paid actors
@poweredbyplants269
2 жыл бұрын
Just installed mine. Followed instructions to a T but awful big bubbles of glue around sides at the bottom and top! What a waste of money my new phone now looks crap! ☹️
@wadegarrett6436
10 ай бұрын
After a year i've had to change my previous whitestone domeglass. Because of this vid i succesfully placed a new one and the other one on the phone of my wife. Key is to have a flat surface.
@fritzeong
2 жыл бұрын
Hi! Your tutorial is so comprehensive! 👍👍👍 Just a quick question. Is it necessary to have this type of screen protector? Or can the normal screen protecter (like for flat display) also work? Sorry if stupid question. This is my first time owning phone with curved display.
@mobilefun
2 жыл бұрын
Thank you! You could get a flat one however the curved edges which are less durable would be exposed still.
@010falcon
Жыл бұрын
This is such an amazing channel Short videos Quick and good information I am impressed and lucky to have found your channel, thank you
@tomrohan8480
7 ай бұрын
Brother do a video for s23 ultra with spigen tempered glass n case
@avocadomangos
2 жыл бұрын
👍 fingerprint is very smooth and fast, and the display quality is unaffected. 👎 installation is very sensitive and the glass is very fragile, I accidentally cracked it with the tip of my finger nail because of an air gap remained at the edge of the glass.
@dash7330
7 ай бұрын
Hi! I want to ask does the phone holder or car holder lift the tempered glass when using it without a phone case?
@lebronjames1341
2 жыл бұрын
Can you remove it easily after ?
@ItsTrizzy262
Жыл бұрын
Yeah. Just like a regular screen protector you gotta dig up I'm one of the corners to get it to lift with a fingernail.
@ggottube
2 жыл бұрын
Great video, thank you. One question - why are there three tubes of adhesive and only two screen protectors? What is the reasoning behind it?
@mathrania
2 жыл бұрын
Its just an extra one. Good to have extra
@mobilefun
2 жыл бұрын
Hello! Yes it is so you have a spare during the installation 🙂
@Damsel1204
2 жыл бұрын
I guess it's for people like me, who got it right on the third tube (my table isn't flat afterall). It was a lifesaver.
@Zoroaster4
2 жыл бұрын
If you look at the video they made for installation on the note 20 it explains it fully.
@Daniel-qu4hs
Жыл бұрын
Excellent tutorial
@wanderjloliveira
2 жыл бұрын
EXCELENT VIDEO CONGRATULATIONS
@bradydurbin
2 жыл бұрын
Just got mine my daughter is going to try both of ours lol
@BretMuckdogs
2 жыл бұрын
Thank you for this video.
@schlenbea
2 жыл бұрын
I just submitted my two week vacation request so I can install my white stone screen protector
@mobilefun
Жыл бұрын
I like what you did there. Did you enjoy your lengthy install?
@newbyclive
2 жыл бұрын
How does water affect the screen protector? If the phone is submerged will it get loose or fall off?
@SirEllington
5 ай бұрын
@mobilefun I accidentally got some of the glue into the top phone-call speaker. Now the call volume is 50% lower. Anyone's got any advice? Should I go to a repair shop and have the speaker replaced? Or get a toothbrush with some thermal paste remover?
@ashutoshpatnaik6298
2 жыл бұрын
Hi Mobile Fun. Thank you for the tutorial. Do we have to do the light things soon after or we can do it even later. I'm asking this cuz I might have not done it properly soon after and my fingerprint isn't getting registered. Please help
@mobilefun
2 жыл бұрын
Hello! We would recommend doing the UV light straight after to ensure it is fitted correctly - this maybe why it isn't working 😕
@wesleycheng1842
2 жыл бұрын
is the glue strong enough not to cause bubble at the edge of the glass after long term usage?
@mobilefun
2 жыл бұрын
Hello! Yes, this is probably the most securely fitted glass protector I have tried on the S22 Ultra 😃
@mrchilled
Жыл бұрын
You didn't mention using the weights to thin the glue at the finger print sensor.
@terrancep.5475
2 жыл бұрын
I installed the screen protector great video. However I'm unable to use the fingerprint scanner now. Do you have any suggestions?
@ezim4296
2 жыл бұрын
Re apply the UV light again over where the finger print registers. Do it for 60 seconds a couple of times waiting a minute in between and it might help. I saw someone else have this issue and it worked.
@swiftblaqness
Жыл бұрын
Take it off and throw it away.
@Veryghoster
Жыл бұрын
Did it work with UAG Plyo case?
@ericg1830
11 ай бұрын
I got this installed properly and it looked really well as if there was no screen protector at all. The fingerprint scanner works well too. However, after a couple of days the left and right sides started to *lift up* and dust and lint started to get in. *It's absolutely annoying.* I keep pressing it with the microfibre cloth to see if it'll stick back, but it doesn't. Any advice?
@suben3
2 жыл бұрын
Is there a list of compatible cases for this screen protector? Is the Gear4 D30 case compatible?
@themenich
2 жыл бұрын
Can you show how to remove this screen protector?
@mathrania
2 жыл бұрын
Very easy, heat up the screen with a hair dryer and pull out from either side with your fingernail. Remove it slowly.
@themenich
2 жыл бұрын
@@mathrania I'm asking them to make a video on that. Saying is easy, doing is difficult task especially when it's on a expensive device like these.
@mathrania
2 жыл бұрын
@@themenich if you follow my instructions,the screen protector removal is very easy. Search for Whitestone Dome Glass removal video on KZitem, you would definitely find one.
@SnifterRoux
2 жыл бұрын
Is this compatible with the otterbox defender?
@luceml8455
2 жыл бұрын
Im lokking for a screen protector and a case to my s22 ultra is white dome good and case friendly? heard of it arent and glass can crack
@gf9111
2 жыл бұрын
how many glue does this come with?mine only came with 2 and i've seen many videos were they included 3?
@RTJody
Жыл бұрын
What happens if it cracks? Can you remove it?
@janmarkowicz4633
2 жыл бұрын
Hi! I already mounted Dome Glass on Note10+ 2 years ago and now on S22 Ultra, and every time I have a very annoying problem: light leaks at the edge of the glass. This glowing frame, right after putting the glass on, is usually broken in some places, slightly chipped or thickened. What am I doing wrong - washing off excess glue too much before curing or what? I am asking for advice.
@nguyenvinhvx
2 жыл бұрын
Man, you're not the only one noticing this. I have mine on a Note 10 plus and now my S22 Ultra. I'm convince that it's not fitting perfectly to the curve of the screen hence the lift. I've had it on multiple time, warranty claimed multiple times and still the same issue, mine and my wife's phone. We've followed instructions to the utmost detail; but still doesn't fit right. They refuse to acknowledge the problem and tell us it's "installation error", luckily Amazon took care of us since they evidently value customer's opinion more than Whitestone.
@janmarkowicz4633
2 жыл бұрын
@@nguyenvinhvx I am glad to hear that I'm not alone. But... can you point out the really good and comparable alternative to Whitestone? I even thought about switching to the foil instead of tempered glass, but for S22 Ultra it's really hard to find the one that works well with 3 things: curved screen, original Samsung etui and S-Pen! Every one that I looked at has something not-OK according to comments: etui lifts the edges, rubbery feel, impossible to put on avoiding dust or bubbles etc. etc.
@nguyenvinhvx
2 жыл бұрын
@@janmarkowicz4633 I've actually resolving to using a brand called Mowei, they comes in a pack of 3 from Amazon, so good to have spare. Mowei also use adhesive/UV light method. I ended up with a few scratches on my S22 Ultra in between removing the Whitestone and waiting for the Mowei to ship home, so I have no choice but to go with an adhesive spread screen protector since it fill in those scratches as well as adhere the screen to the phone, the scratches becomes invisible after the adhesive fill them in, but I digress. There's just two things, things I can easily live with, there's a small circular patch at the on-screen finger print sensor area, it's not noticeable most of the time, it's only noticeable during installation and when you remove the film on it; the other is that the screen protector doesn't have a cut out for the front facing camera, so it's underneath the screen protector, if you scratch that area, then your selfies will be blurry. That's it, it's a great Whitestone alternative for me, because for the life of me I can't get the damn thing to fit properly on the S22 Ultra. I believe that Whitestone banked on the adhesive filing the gap between the curved screen and the curved protector and once cured they'll just stay in one place, but it didn't work for me, I cured it extra times on each installation and it still end up gapping upwards and just spread slowly in time.
@swiftblaqness
Жыл бұрын
You aren't doing anything wrong these screen protectors are just a sham. I've installed two of them one cracked within a day the other within a week and on the second install I couldn't even use my fingerprint.
@cw6082
2 жыл бұрын
Just got my 256gb one
@flipicaneze
2 жыл бұрын
You say you wish you could send the light back. I wish I could purchase the kit without the light for a lesser cost as I have multiple phones within my family and upgrade often.
@Stonefly2112
2 жыл бұрын
Great video but not showing the fingerprint sensor working? Or tips on how to best register your prints? Come on man!
@mobilefun
Жыл бұрын
sorry about that. While it's tough to explain in the written word, I will attempt to do so in emoji format - 👇📱🔘😃
@janmarkowicz4633
2 жыл бұрын
I am ALWAYS afraid before the installation of tempered glasses like this, because 1 tiny piece of dust = air bubble and it's SO hard to find a dust-free place in the house :v
@michaelsanders5938
2 жыл бұрын
I agree 100% with you. I am not quite OCD, more like OCT - Obseesion Compulsive Tendency. One tiny piece of dust would drive me crazy. I waited about 4 days before opening (removing factory screen protector) my S22 Ultra until I had my Whitestone Dome glass protector. Removed the factory screen protector and immediately applied the Whitestone.
@Zoroaster4
2 жыл бұрын
I know it gets so annoying. Whenever I put mine on I have to work quick cause every second it seems like another piece of dust lands on the screen. If you have a hard time seeing the dust the best way I've found is I have a really bright flashlight. I set it so the light is even with the phone. Shining across the entire screen. That seems to make it easier to see any dust. If you don't have a really bright flashlight you can use one of those desk lamps with just a normal bulb. But it has to be the kind with the movable neck so you can get it as horizontal to the phone as you can.
@janmarkowicz4633
2 жыл бұрын
@@Zoroaster4 Yes, you're right with this bright light. I can add that the best room to do this is the bathroom just after hot shower. Water steam kinda binds with dust in the air allowing it all to drop on the floor before you'll start to applicate the glass :)
@Zoroaster4
2 жыл бұрын
@@janmarkowicz4633 I'll have to give that a try. Thanks.
@MrJoshkm
2 жыл бұрын
@@janmarkowicz4633 This is always what I do, apply them in the bathroom after a hot shower and every time it worked
@terryeverly5617
2 жыл бұрын
You would need the light if the installed protector gets damaged and you need to install the spare
@isthatus0768
Жыл бұрын
Why is this more expensive than the S23 Ultra one on your website?
@MajPayn
Жыл бұрын
What's it look like when you take the screen protector off? Does it leave residue and is it hard to get off?
@bhupinderpalsingh3912
2 жыл бұрын
that's a lot just to put a screen protector on hahah does the uv light come with this package?
@mobilefun
2 жыл бұрын
Hello! Yes the UV light does come with the protector 😀
@bhupinderpalsingh3912
2 жыл бұрын
@@mobilefun thank you. I am still unsure about fitting the protector myself
@safalshrestha8455
2 жыл бұрын
Hi Mobile Fun, which phone colour looks good in hand, is it black or green? i cant decide. need your help :)
@mobilefun
2 жыл бұрын
Hello! We love the green! 😍
@safalshrestha8455
2 жыл бұрын
@@mobilefun Thanks for helping out. I've got my Green pre ordered as well :)
@margolawton8054
2 жыл бұрын
Where the Hell is this UV lamp of which you are speaking???
@norishamaharaj3754
2 жыл бұрын
I bought it online.
@mobilefun
2 жыл бұрын
Hello! The link attached is the Whitestone UV installation - www.mobilefun.co.uk/whitestone-dome-screen-protector-twin-pack-for-samsung-galaxy-s22-ultra-88134?referer=P&Whitestone_Dome_Installation_Samsung_Galaxy_S22_Ultra_28022022 😀
@EduardoDavid
Жыл бұрын
dear god, so simple this instalation....c'mon!!
@Zoomer30
Жыл бұрын
If you love a working fingerprint scanner, DO NOT BUY THIS! There is no "trick" to make it work. You'll be lucky to even be able to rescan your prints.
@swiftblaqness
Жыл бұрын
Exactly I took mine off within an hour. Somehow they have convinced us all that there screen protectors are the best when in reality the only just look and feel nice. They crack under minimal pressure and I have heard reports of multiple on accounts of people not being able to use their fingerprints after installation.
@fokerfakerfuker
2 жыл бұрын
all this trouble just to install the screen protector?
@mobilefun
Жыл бұрын
But imagine the trouble if you had to install a new screen!
@Nour-hh7ok
Жыл бұрын
Make sure the surface your laying the phone on is very flat
@mobilefun
Жыл бұрын
Hi Nour, thank you for the heads up on this. For the last install we performed, we scrapped the table and installed it while resting on a bed of marbles. It was absolute chaos. Have a fantastic New Year!
@MalikAwan-sw2wm
2 жыл бұрын
Why they have 2 protectors?
@mobilefun
Жыл бұрын
Because the second one can be used as a shield for a hybrid Captain America / Mouse.
@Best_of_92
2 жыл бұрын
My finger print won't work even with touch sensitivity enabled
@mobilefun
Жыл бұрын
Have you tried using a toe instead?
@trippzxi3792
2 жыл бұрын
This really ain't worth the hassle I got a panzer glass one and its perfect
@whateverchannel22
Жыл бұрын
Panzer has the stupid fingerprint hole. I couldn't bear staring at that irritating bit on my screen. Most people don't even need a screen protector.
@traveler1012
Ай бұрын
So much Just to put a screen on
@Zoomer30
Жыл бұрын
Update Degraded to the point where it won't even let me scan my prints. Green ring goes about 3/4 around, BOOM error. Worthless if you want to use the FP scanner. Also blame the devs for the idiocy of putting the FP scanner in the screen.
@alanc6140
2 жыл бұрын
Not worked for me at all even after watching the video and reading the instructions from the package. I got bubbles on the edges and on the ultrasonic fingerprint sensor. I guess my package came defective or something, and it was a mess... Will try other screen protectors. Asked for a refund already. What a waste of time and money
@bluelude2001
2 жыл бұрын
Lifehack - put phone in tanning bed to save time.
@carmenibarra4243
Жыл бұрын
In my opinion it's too complicated to install.
@swiftblaqness
Жыл бұрын
DO-NOT buy these screen protectors I have had them on my s22 ultra and in both instances the screen protector was cracked from a laughable amount of force. The first one, I dropped from about 3 ft as I was sliding it into my pocket... you know a drop that wouldn't have actually cracked my normal screen. The second I just put on yesterday and literally cracked within an hour of me having it on because my water bottle fell over on the couch and rolled into my phone with minimal force and chipped the screen, I shit you not that was somehow enough force to break it. I would love to know how this protects your screen for your phone when it literally cracks from anyting, even things that wouldn't have cracked your original screen. You'll be replacing your screen protector every other day. Such a waste of 50 dollars. Also this video should REALLY MOST DEFINITELY iterate that you must have set this up on a completely level table or surface and apparently the entire house. I poured the adhesive on to my phone screen and it literally all ran off because the particular room I was setting it up and has an uneven floor. It literally ran off my screen like olive oil on a Teflon pan. Within one millisecond 90% of my adhesive was wasted.
@Cam-wi3tp
2 жыл бұрын
extremely hard to find and the reviews everywhere I have read are horrible
@larryblanchard2290
2 жыл бұрын
I have found they go on fairly well as I have used the on my Note 10 and wife's Pixel phone...a few months later that start to lift and bubble...never will I buy again
@istvantoth7431
Жыл бұрын
LOL, there are two glasses in the box and enough liquid for only one application. You might have guessed by now... Whitestone don't sell the liquid only, separately. Soooo, buy the whole pack again! What an utter rip-off... seriously.
@bypyhgyk
Ай бұрын
Awful complicated and Awful amounts of waste plastics to throw away after installation. In clear mind i would never buy that screen protector. Much more easier and cheaper and without plastic waste- are self adhesive screen protectors which our family is using for last 10 years. We can get like 2 screen protectors for 2USD if we need to. And replace them twice per year if need to.
@Zoomer30
Жыл бұрын
I can't emphasize enough. If you want a functional fingerprint scanner Don't buy this piece of 💩 Mine worked for perhaps a week and now refuses to scan prints.
@killabeezle
2 жыл бұрын
way too complicated and there is too much plastic in the kit, not really E friendly, ill stick with the samsung screen protector
@woody6791
10 ай бұрын
Wtf is that 😂
@thepeterbro1
2 жыл бұрын
This screen protector ruins the fingerprint scanner. It's a KZitemr trying to make money off affiliate links
@user-rz3tl1fd4m
Жыл бұрын
just take the cheaper china uv glass , ITS ALL THE SAME, and too easy to aply without this square! WHItestone make it marketing game !!!!
Пікірлер: 119