介紹Sandbox Smart R2 內部風道如何清潔
Cleaning introduction : How to clean the internal air tunnel for your Sandbox Smart R2
Sandbox Smart R2のファンダクト清掃方法について
0:00 Remove the case 拆卸外殼 ケーシングの取り外し
1:17 Air Tunnel Cleaning 拆除/清潔風道 ファンダクト清掃
4:12 Turbofan Cleaning 拆除 /清潔風扇 排気ファン清掃
5:18 Load back to Tunnel 裝回風道 ファンダクトの取り付け
6:47 Load back to the case 裝回外殼 ケーシングの取り付け
9:32 APP test 測試 動作確認
準備道具:
1.螺絲起子
2.老虎鉗或尖嘴鉗
3.中性清潔劑
4.抹布或擦手紙巾
5.毛刷
Prepare tools:
1. Screwdriver
2. Vise or needle nose pliers
3. Neutral cleaner
4. A rag or hand towel
5. Brush
必要な道具
1. ドライバー
2. ペンチ
3. 中性クリーナー
4. ふき取り用の布
5. ブラシ
建議清潔頻率:
每烘焙30鍋或一個月固定清潔
Recommended cleaning frequency:
Every 30 batches or 1 months of roasting usage
推奨清掃頻度
月に1度、またはアプリで清掃推奨ポップアップ表示時
*請注意
1.保持定期清潔的習慣,咖啡油漬較易清潔
2.腔體內若堆積太多粉塵,容易影響偵測溫度,建議定期清理
3.關掉電源並移除電源線再進行
4.機器與滾筒、加熱管完全冷卻後再進行
*Note
1. Frequent cleaning will make coffee stains easier to remove.
2. If too much coffee dust accumulates in the roaster, it will affect the temperature sensor. It is recommended to clean it regularly.
3.Please turn off the power and remove the power plug.
4.Ensure the machine and the drum, heating tube modules completely cooled.
※注意事項
1. 必ず、コンセントから電源プラグを抜き、本体裏側の電源スイッチをOFFにした上で清掃を行ってください。
2. 焙煎機やドラム、電熱線モジュールが冷えていることを確認の上作業を行ってください。
3. 焙煎機内にチャフや微細なごみが多く残っている場合、温度センサーが正常に動作しない可能性がありますので、定期的な清掃を推奨致します。
4. 定期的に清掃を行うことで、焙煎の汚れを簡単に落とすことができます。
Негізгі бет Sandbox Smart R2 instruction video - Tunnel Cleaning 風道清潔操作影片 ファンダクト清掃
No video
Пікірлер