For $49, you can rent this deck sander from Home Depot and sand your deck DIY style. In this video, follow along as I show how to use the deck sander I rented from Home Depot.
Blog:
www.jamz.net
Twitter:
twitter.com/jamzdotnet
#homedepotrental
#homedepot
#sander
#deck
#wood
#decksander
#diy
Sanding your deck with a machine can be an efficient way to prepare it for staining or refinishing. Here's a general guide on how to sand your deck using a machine:
1. Choose the Right Sander:
Select the appropriate type of sander for your deck. Common options include drum sanders, orbital sanders, and random orbital sanders. The choice depends on the size of your deck and the level of sanding required.
2. Gather Necessary Equipment:
Ensure you have the necessary safety equipment, such as safety glasses, a dust mask, and ear protection. Additionally, have the appropriate sandpaper for your chosen sander.
3. Prepare the Deck:
Clear the deck of furniture, plants, and other items. Sweep or blow away loose debris and dirt. It's essential to start with a clean surface.
4. Inspect and Repair:
Before sanding, inspect the deck for any damaged or raised areas, such as loose boards or protruding nails. Make any necessary repairs to ensure a smooth sanding process.
5. Start Sanding:
If you're using a drum sander, start in one corner of the deck and move the sander along the grain of the wood. If you're using an orbital or random orbital sander, you can start from anywhere on the deck.
6. Work in Sections:
Divide the deck into manageable sections and sand one section at a time. Overlapping each pass slightly helps ensure an even result. Keep the sander moving at a consistent pace.
7. Check for Evenness:
Periodically stop and check the sanded surface for evenness. Make additional passes or focus on specific areas if needed.
8. Change Sandpaper Grits:
Begin with a coarse grit sandpaper to remove existing finishes and rough spots. Gradually progress to finer grits to achieve a smoother finish. This step may involve changing sandpaper on the machine.
9. Clean the Surface:
After sanding, thoroughly clean the deck to remove dust and debris. You can use a broom, vacuum, or blower for this purpose.
10. Finish with Hand Sanding:
For edges, corners, and areas that the machine couldn't reach, use a hand sander or sandpaper to ensure a consistent finish.
11. Apply Stain or Sealant:
Once the deck is sanded to your satisfaction, you can proceed with staining or applying a sealant to protect the wood.
Always follow the manufacturer's instructions for the specific sander you're using, and be sure to prioritize safety by wearing the appropriate protective gear. If you're unsure about the process, consider consulting with a professional or seeking advice from your local home improvement store.
Негізгі бет Sanding your deck with a Home Depot rental sander | Home depot rental
Пікірлер: 123