I've completed this job many years ago and just want to tell you, you did an excellent job at describing and documenting the entire process. Thank you
@neilfromclearwaterfl81
5 ай бұрын
The trick to adjusting the cables is you put the transmission into neutral, release the clips on the adjusters, put the shift lever into the position where the u-shaped metal clip sticking out behind the ball pivot on the base of the lever can slip forward and lock it into the neutral adjustment position, verify again that the transmission is indeed still in neutral and then press down the locking clips on the adjuster ends of the cables. Now release the neutral adjustment lock on the shift lever and your done and should have a properly adjusted shifter. Test the function of the shifter and if everything is happy, put all the trim, etc back together. It sounds more complicated than it is and the Haynes Manual doesn't include the diagrams on this procedure on the page with the written instructions making it harder to follow. Before doing this it would be good to lubricate the shift cables by sliding back the boots on the transmission end of the cable and either use a White Lithium Aerosol or PBlaster Garage Door Aerosol Lube which is also a very good cable lubricant. Best!
@nancimason5457
2 жыл бұрын
Thanks, enjoyed your video, have the exact Saturn! Nanci
@adolfothabarber935
2 жыл бұрын
Appreciate you 💯💯💯
@nightwing5177
Жыл бұрын
Grate Video, Do you have the part number?
@rkshell1975
Жыл бұрын
JDMSPEED New Manual Transmission Shift Cable 21996492 Replacement For Saturn Vue 2.2L 2.5L 2004-2007 a.co/d/cV4DYPL
@salrussano1
Жыл бұрын
Alot of unnecessary stuff you took off job takes less than 30 minutes
Пікірлер: 11