Hey man, great video again! I'm waiting to go pick up a new 2017 rzr xp 1000. I can think of a lot of super atv stuff I want to put on it but I guess I'll have to save up a little. I definitely like the reviews of all the products and see y'all using them on rides. Keep the videos coming!
@SlikRokProductions
7 жыл бұрын
Really appreciate the comment Jacob! That is awesome, you will absolutely love it! Step by step man it will be built how you want, don't rush it and just enjoy the machine!
@barharborbasher249
6 жыл бұрын
Yep ... Sold 🍻 They look stout AF 💪🏼 I’ll have to see the offset options and how much the plate cost 💸
@SlikRokProductions
6 жыл бұрын
Awesome, they are super stout and look killer!
@chapsteronetime2000
4 жыл бұрын
Curious on the rock sliders green white two seater? Sleek looking love it, I shop super atv also great products so far turbo S and xp1k. I’d love to no were to buy them white rock sliders? Appreciate all the honesty, tech vids etc thx N Az
@SlikRokProductions
4 жыл бұрын
Hello! thet are ricochet off road sliders. www,ricochetoffroad.com
@KnownSender1
6 жыл бұрын
Got mine today wow they are awesome
@bikeracr
6 жыл бұрын
Hello there I really enjoy your vidio's and your tech vid's ! do these arm's also give some lift as that RZR look's quite high or do you also need a lift kit ? I have been a subscriber ever since I saw your first vidio at Moab keep up the great channel
@SlikRokProductions
6 жыл бұрын
Aftermarket Al Thank you so much, really appreciate that!! So we run portal gear lifts(the silver box at each wheel) the A Arms give the illusion of being higher because of the high clearance arch. Thanks again for the support!
@danmatzenbacher631
5 жыл бұрын
I believe portals give 4 inch lift
@lowdose338
6 жыл бұрын
is there any way to get build lists on these machines that are featured in the videos? I'd be curious to know your exact suspension setup on the white/green 2 seater.
@SlikRokProductions
6 жыл бұрын
lowdose338 Front: superatv 4" portals gear lift, Zbroz full shocks, superatv atlas boxed a arms with uniballs, front sway bar completely removed. Rear Zbroz trailing arms, ZRP billet radius rods, and Zbroz quick disconnect sway bar. Sandworks cage, Polaris ride command dash, Polaris front bumper, freaky grafix wrap, innovative design works bee safe fire suppression, and trunk, ssv stereo. SuperATV low boost turbo kit.
@lowdose338
6 жыл бұрын
Thanks! Really appreciated. Keep the great videos coming. Are the boxed A-Arms not forward offset? What wheels do you recommend? Rocktane tires? what size are you running? 34" ? I was emailing you guys but not getting a response, thanks for your time!
@SlikRokProductions
6 жыл бұрын
Thank you for watching them man! Yes the boxed a arms are forward offset 1.5". Wheels it just comes down to the style you like. Most companies make great wheels. Raceline, fule, sti ect... We run roctanes, cst lobos for rocks, itp ultra crosses and have run several LT tires. Just depends on your riding. The roctanes are a great all around tire. We run 34" and 35" tires. What email were you emailing to?
@lowdose338
6 жыл бұрын
I had my mechanic setup an account with Super ATV. Upon reading the specs for these A-Arms they claim not to go above a 32" tire? Clearly you guys are going over that. Am I safe going above their recommendation? I would prefer to have the 34" tire.
@SlikRokProductions
6 жыл бұрын
It is completely your call, as for us we have run 34" tires and 35" tires some upwards of 90lbs with wheel and we have not had any issues.
@betteroff55
2 жыл бұрын
Better then HCR
@briandisimo4378
2 жыл бұрын
Do the make a plate to support the upper a arms tab from ripping off?
@SlikRokProductions
2 жыл бұрын
Are you having that issue. In our experience it’s only the lowers that have an issue.
@briandisimo4378
2 жыл бұрын
@@SlikRokProductions yea in the past after hard landing the front a arm mount would bend forward
@justinturner5145
6 жыл бұрын
Great vid thanks
@SlikRokProductions
6 жыл бұрын
justin turner thank you!
@kylegohawks8604
6 жыл бұрын
How much heavier are they? We can throw an extra 1/2 ton at it and it won't affect performance lol
@SlikRokProductions
6 жыл бұрын
Definitely stout not sure on exact weight!
@fredbunkley5604
7 жыл бұрын
Do they make for a Can-Am Maverick Max XRS? Awesome video, thanks!
@SlikRokProductions
7 жыл бұрын
I just looked and they are not on there website so I called them and they are in the works but no launch date yet!
@fredbunkley5604
7 жыл бұрын
SlikRok Productions thanks!
@SlikRokProductions
7 жыл бұрын
Anytime Fred!
@user-md6qp9mp4g
6 жыл бұрын
are this arms available for the Polaris General 4seater? I like this video!
@SlikRokProductions
6 жыл бұрын
I am not sure, go check out their website www.superatv.com
@eltwitch9469
6 жыл бұрын
Quick question, I've had these on my machine for a couple years now and love them. But I always wondered what the additional tabs on the top a-arms are for. I know the ones closest to the front bumper is for the bumper sway bar.. right? And is the other tabs behind that kind of flipped upside down, are they for an other style of sway bar as well? Can anyone shed some light please. Thanks in advance guys/gals.
@SlikRokProductions
6 жыл бұрын
You are correct, top tabs are for the superatv sway bar bumper and the down facing tabs are the factory sway bar mount.
@eltwitch9469
6 жыл бұрын
@@SlikRokProductions ahh awesome, thank you guys!. I though so but just wanted to be sure. I have a 2016 xp4 and I seen some new turbo rzrs come with factory front sway bars.. Can they be adapted to the 16 frame?
@SlikRokProductions
6 жыл бұрын
Yes they can. We actually take our front sway bars off and throw them away.
@eltwitch9469
6 жыл бұрын
@@SlikRokProductions lol what no S#%&.. well because you guys mostly crawl right?.. out here in Az we do long desert trails trips at higher speeds.. As why I was investigating this whole front sway bar thing. Well if you guys decide to throw an other set up away haha send it my way instead! It would be greatly appreciated and received ha ha.
@SlikRokProductions
6 жыл бұрын
To be honest we probably have one laying around the shop I would guess. I can check.
@brianhubbard6423
5 жыл бұрын
I'm new to your vlog. Do you show how to install the parts?
@SlikRokProductions
5 жыл бұрын
Brian Hubbard Welcome Brian! Yes we have a video on the installation!
@rogerl8488
4 жыл бұрын
So you still high up on these a arms? Looking to buy some .... I like the look on these... fig from china the metal not so good...
@SlikRokProductions
4 жыл бұрын
Still have never broke or bent these arms! great bang for the buck!
@rogerl8488
4 жыл бұрын
@@SlikRokProductions well that answer my question I will be. Buying me a set also !! I love the look!! Thank you for your time!!! Just found your show an love it!!
@SlikRokProductions
4 жыл бұрын
@@rogerl8488 Keep us posted and have no doubts you will love them! Welcome!
@rogerl8488
4 жыл бұрын
@@SlikRokProductions so what ball joints do I want to pick? I see they have a code from watch your channel...
@SlikRokProductions
4 жыл бұрын
@@rogerl8488 Comes down to your riding style. Have you broke an oem ball joint? want a little upgrade or you looking at putting in some that you won't have to ever worry about again?
Пікірлер: 51