I would run a picatinny rail instead of those separate mounts especially with a savage. If you'll notice savage actions are open at the top and bottom with only the sides being solid so putting a picatinny rail on it will increase the rigidity of the action. I've seen this make a difference on a savage model 11 that my cousin owns.
@ranchhandrandy3213
5 жыл бұрын
So much this☝🏻
@robertmastes135
3 жыл бұрын
All stocks come at about 97% inletted. That last 3% means the world of difference. Get some stock inletting ink and a chisel watch this video How to Inlet a Semi-Inletted Rifle Stock Presented by Larry Potterfield | MidwayUSA Gunsmithing Do this next time before you bed a rifle.
@wizardny
5 жыл бұрын
I put pillars in mine. The Boyds stock is too soft to get a good torque without crushing or splitting it. I have a Ruger American Predator so the mounting was different. I had to put on a metal trigger guard and magazine tab as well.
@dgunnut6550
5 жыл бұрын
Pillars may be next. Thanks for the suggestions!
@JimPepperTactical
5 жыл бұрын
hmmm..makes me wonder if a scope base is loose or something. Not bad groups but kinda erratic, I agree. Good luck, I'll be curious to see how this all plays out.
@azhunter8636
4 жыл бұрын
You thought using pillars as well? As said the Boyd’s material is really soft. One thing to note, savage rear tang actions like to be floated from the stock. Easy way to do so, is to place painters tape under it as you bed the action. Lastly, verify your barrel is free floating. I like to tape the barrel to get the spacing I want to the stock. I like the video and some good information.
@timfarley6493
5 жыл бұрын
I enjoy watching your videos. You come across as just a regular guy, who loves to shoot, work on his guns, and does his best to develop accurate loads. I have never bedded a stock, so I cannot offer any help on your issues. That said if it were I, I would take the rifle to a gunsmith who does stock work/bedding and ask for their opinion and suggestions.
@dgunnut6550
5 жыл бұрын
Thank you for the kind words! You about summed me up😁. I like to share what I do in case it can be helpful to others. I just took this gun back out for further testing yesterday with handloads this time and it seems to be shooting as good or better than it did with the factory stock. I will post an update video next weekend. Thanks for watching!
@timfarley6493
5 жыл бұрын
@@dgunnut6550 Great! I look forward to your video.
@jimguthrie1583
5 жыл бұрын
I have a Savage XP in .22-250 which is very similar to this rifle. I also have this exact same stock on it. (also bedded.) I am having real good groups using 53 gr V-max's and 38.7 grains of H-380. Might be worth a try in yours.
@dgunnut6550
5 жыл бұрын
Good suggested load. I just had mine out again yesterday. Almost updated the video, but decided I’ll do another update next weekend. I shot 52 gr. Sierras with H380 and got some good groups.
@randyschaff8939
5 жыл бұрын
That’s an honest real world vid.
@blackriflecoyote7821
5 жыл бұрын
Try some imr 4895 with 50 55 gr nosler. Like to see your ar with some 60 gr vmax loads some time
@garyb1434
5 жыл бұрын
I like that stock. I have the same rifle and am considering a stock like yours. Can it be shot left handed? Can’t tell from the vid.
@dgunnut6550
5 жыл бұрын
It’s not biased for right hand so it should work good left handed as well.
Пікірлер: 19