This video just helped me out while filming my own video! :) Thanks Curt!
@justsomeguy3931
2 жыл бұрын
This video was very helpful, thanks for sharing
@FatManLeather
6 жыл бұрын
I wish I had seen this sooner but I'll be starting a Savage Axis build pretty soon.
@jamesmooney5348
5 ай бұрын
Still have the barrel? Doute it, but dont hurt to ask. Thanks
@vaughnprecision
5 ай бұрын
No, that’s long gone. I do have a .243 barrel off a savage though
@Muzzy519
4 жыл бұрын
Just stumbled across your channel and love it. Thanks for the videos. Would you consider doing a getting started in rifle building/ gun smithing tools video? Start with these, upgrade to these, etc.
@vaughnprecision
4 жыл бұрын
Muzzy519 there have been a few folks who’ve asked about this, let me think on it.
@carr28usa
Жыл бұрын
How the hell does that bolt come out? I have tried everything. Yes, I am pulling the trigger all the way back and the bolt release on the bottom in front of the trigger guard. I have taken many bolts out, but this one is killing me.
@Ambushw23
2 жыл бұрын
That dirty grit you see on the trigger and sear is not because of machine and not because it’s not clean it’s molybdenum we use to lube the spot where the seat and trigger slide. I’m a builder at savage.
@veronicastgermaine4555
4 жыл бұрын
Hey Vaughn, I found a. 300 win mag and I've started to try and fix it.. the bolt will not come out of the chamber? Please help! Its completely stuck
@vaughnprecision
4 жыл бұрын
Email me and I’ll see what I can do. Vaughnprecision@gmail.com
@Eugene2ndW
3 жыл бұрын
Vaughn, I have this rifle in 223 and have about 40 rnds thru it. Looking at bore thru a scope. I see rings going full circle across lands and groove in a close regular pattern from throat to muzzle. I can only assume this is chatter in the button rifling. Is this normal? Thanks
@500TT
6 жыл бұрын
Interested in the factory heavy barrel. Will it fit an axis xp?
@thecrustyoldmachinist9384
4 жыл бұрын
Vaughn: Thank you for this series. I appreciate the time and effort it takes to make videos for KZitem. Have any barrels left?
@vaughnprecision
4 жыл бұрын
The Crusty Old Machinist last barrel is sold.! I do come across them so you can always check in
@bradleykahler860
4 жыл бұрын
Hey Vaughn, when removing the trigger assembly I managed to let the small retention spring fly out and cannot for the life of me find it. Can I buy a replacement spring online somewhere??
@raphajeb2181
2 жыл бұрын
Where can i buy magasinbox for the savage 110 fp 308.
@calos619213
4 жыл бұрын
On my 110e the magazine is fixed to the barrel, is there a way to remove it and place in a new chassis? Thanks
@jassonco
7 жыл бұрын
My mistake on the 6.5x284 Norma suggestion! Go with the 6.5 Creedmoor. The 6.5x284 Norma is for the long action 110 where long bullets and long OAL work best.
@augustusmccrae5156
5 жыл бұрын
You're doing a nice job here, not to sound like a smarta$$ or anything, but is there a reason that you didn't simply buy a savage 12 action and start the build?
@vaughnprecision
5 жыл бұрын
jim jim unfortunately you can’t buy the action for the 12. Cabela’s often has these on sale for $319, less than you can buy an action for.
@augustusmccrae5156
5 жыл бұрын
@@vaughnprecision ah ha, I knew there was a logical reason and 312 washingtons is a pretty dang good reason, really loved your series here
@scclare
4 жыл бұрын
I suppose the barrel is no longer available?
@UpsetToastYoutube
Жыл бұрын
Thank you Seth Rogen
@vaughnprecision
Жыл бұрын
😂 I’ve heard that soooo many time and still think it’s funny
@connormilton1356
4 жыл бұрын
How similar is this rifle to the savage 110 in .308?
@vaughnprecision
4 жыл бұрын
Very!
@poyo503
Жыл бұрын
Is this the same process for a savage model 110 ?
@vaughnprecision
Жыл бұрын
Yes
@cecileubank2555
6 жыл бұрын
I was thinking this was about the savage rifle whats left the action only very informative though not being negative
@fnkdtnk
2 жыл бұрын
If you’re not keeping the barrel, why not buy an unbarreled receiver and bolt from the get go? I swear I have seen savage short action recievers with accutrigger and bolt on brownells for less than the 12 fv.
@Leafbinder
4 жыл бұрын
So have ya sold that stock yet?
@vaughnprecision
4 жыл бұрын
yep, there all gone
@jonathanwheatley6651
6 жыл бұрын
Have you sold the stock yet
@vaughnprecision
6 жыл бұрын
Not yet
@jonathanwheatley6651
6 жыл бұрын
Vaughn Precision would you take 35 for the stock and me cover shipping? And how would I send you the payment? (I’m in Arkansas)
@TexanUSMC8089
6 жыл бұрын
12 FV should be a 26 inch bull barrel. Did you sell it?
@vaughnprecision
6 жыл бұрын
I have a pile of Savage barrels, all new to~!
@calebjohnson3679
6 жыл бұрын
Do you have a website where I can contact you? I’m also interested in one of those barrels if you still have a bull or Carnot barrel in .308
@vaughnprecision
6 жыл бұрын
Cal J email me at vaughnprecision@gmail.com
@danny1kid
6 жыл бұрын
I'm interested in a heavy barrel in .308
@wtongtube
5 жыл бұрын
What is the Shank diameter and TPI?
@levirobertson6148
7 жыл бұрын
Still have the barrel?
@vaughnprecision
7 жыл бұрын
Levi Robertson I have 3 or 4 of them
@levirobertson6148
7 жыл бұрын
Vaughn Precision, all in .308?
@vaughnprecision
7 жыл бұрын
Levi Robertson yes, I do have a sporter in 243 but it’s not worth owning. The others are all 308
@kellycowett6254
5 жыл бұрын
@@vaughnprecision do you still have savage 308 heavy barrel
@darrenbaldwin5354
4 жыл бұрын
U still have parts
@frankmiller95
4 жыл бұрын
Torx head bolts as of 03/2020
@MrBackcountry84
6 жыл бұрын
How much for the barrel?
@vaughnprecision
6 жыл бұрын
MrBackcountry84 $60 plus shipping
@TexanUSMC8089
6 жыл бұрын
I'll take one.
@jonathanwheatley6651
6 жыл бұрын
If not get in contact with me please. I would like to get it. Had an accident due to ice and busted the stock end and don’t want to buy a Boyd’s stock
@vaughnprecision
6 жыл бұрын
Jonathan Wheatley I still have the factory stock
@jonathanwheatley6651
6 жыл бұрын
Vaughn Precision how much are you asking for it?
@vaughnprecision
6 жыл бұрын
Jonathan Wheatley $40 and cover shipping
@jonathanwheatley6651
6 жыл бұрын
Vaughn Precision also will the short action stock fit the long action clip?
@vaughnprecision
6 жыл бұрын
I don't think it will.
@bengerman9736
3 жыл бұрын
I hope you don't buy K cars and rework them into Lambos........cheers for new years
Пікірлер: 62