You can get the Tools used for this here: amzn.to/3U7iAZf
Gather Necessary Tools: Before starting the replacement process, gather the necessary tools such as a screwdriver set and a trim removal tool.
Disconnect the Battery: To avoid any electrical mishaps, it's recommended to disconnect the car's battery. This step is crucial for your safety.
Remove the Interior Door Panel: Use a trim removal tool to carefully pry off the interior door panel. Start from the bottom corner and work your way around the edges. Once the panel is loose, lift it up and disconnect any electrical connectors attached to it. Set the panel aside.
Locate Mirror Mounting Screws: Inside the door, you'll find the mounting screws securing the side mirror. There may be one or more screws depending on the specific model. Use a screwdriver to carefully remove these screws.
Disconnect Mirror Wiring: After removing the screws, you'll see the wiring harness connected to the mirror. Disconnect the electrical connector by pressing the release tab and gently pulling the connector apart.
Remove the Old Mirror: Once the wiring is disconnected, carefully pull the old mirror assembly away from the door. Be cautious not to damage any surrounding components.
Install the New Mirror: Position the new mirror assembly in place, aligning it with the mounting holes on the door. Make sure it sits securely before proceeding.
Connect Mirror Wiring: Reconnect the electrical connector to the new mirror assembly. You should hear a click when the connector is properly seated.
Secure Mirror with Screws: Use the screws you removed earlier to secure the new mirror in place. Tighten them securely, but be careful not to over-tighten and damage the threads.
Test the Mirror Functionality: Reconnect the car's battery and test the new mirror to ensure it functions correctly. Use the mirror adjustment controls inside the car to adjust the mirror's position.
Reattach Interior Door Panel: Once you've confirmed that the new mirror is working properly, reattach the interior door panel. Align it with the door frame and gently press it into place. Secure any screws or clips that hold the panel in position.
Reconnect the Car Battery: Finally, reconnect the car's battery to restore power to the vehicle. Test the mirror once more to ensure it continues to function correctly.
By following these steps carefully, you should be able to successfully replace the side mirror on your 2013 Volkswagen Passat. If you encounter any difficulties or have concerns, it's always best to consult a professional mechanic for assistance.
Негізгі бет Save Money: DIY Guide for Changing Side Mirror on 2013 VW Passat
Пікірлер