YOUR WEBSITE IS A MESS. I JUST WANT TO BUY SOME BRACKETS.
@BillHarrisJazzPiano
2 жыл бұрын
How and where do you attach the micro inverters (Enphase IQ7+ example)?
@TheMetalRoofingAcademy
2 жыл бұрын
When using micro inverters or optimizers with our direct attach PVKIT system, the majority of the time the units are directly bolted to the module frame under the module. Often modules have predrilled holes in the frames for this application. In the rare case this is not an option, the inverters or optimizers and be attached to their own clamp or bracket under the module.
@aarxo5237
6 ай бұрын
Great video, Thanks! How do you fit microinverters under the panel when you mount like this?
@TheMetalRoofingAcademy
6 ай бұрын
Thanks, Aaron! Check out our other video: "Maximize Your Solar Potential: A Guide to MLPEs on Metal Roofs!" - kzitem.info/news/bejne/2mZmyH-jhJR_fmk Please email us at support@s-5.com where we can help discuss your project more specifically.
@shrugger1
Жыл бұрын
Just what I need. I'm only looking to power my metal roof shed.
@TheMetalRoofingAcademy
Жыл бұрын
Glad to hear it! If you need any help with your project, don't hesitate to reach out to us at support@s-5.com.
@shrugger1
Жыл бұрын
@@TheMetalRoofingAcademy Thanks. I likely will.
@obadimuadewunmi3127
Жыл бұрын
This is quite interesting, can I have a link to order this for commercial installation
@TheMetalRoofingAcademy
8 ай бұрын
We'd be happy to assist you with your commercial installation. Please reach out to us at support@s-5.com and we'll connect you with the best purchasing option for your project and region.
@geigerre
10 ай бұрын
Will this work with Batten Seam metal Roof ?
@TheMetalRoofingAcademy
8 ай бұрын
Please send us information about your roof to support@s-5.com and we'll be happy to assist further.
@junkvista61
Жыл бұрын
I plan to build a carport, patio stye, with 8 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel from Home Depot. The carport will accommodate 20 solar panels, each measure 39"x65" . Are your product certified and meet city building codes and comply with power company for safety? If so please give me the list of things I need to mount my 20 panels. Thanks
@TheMetalRoofingAcademy
8 ай бұрын
We almost certainly do have certifications for your jurisdiction, but questions like this are best handled by one of our application engineers. Please reach out to us at support@s-5.com and we'll be happy to help you on a project specific basis.
@bhavadasaacbsp3274
Жыл бұрын
I called our local distributer, and was told that you do not sell to home owners, only for commercial. I wanted to purchase for our cabin. Is tis true?
@TheMetalRoofingAcademy
Жыл бұрын
I do know that some distributors business models are set up to only sell commercially, but that is not the case for most of them. You can see our full list of distributors on our How to Buy page (www.s-5.com/how-to-buy/?swcfpc=1). If you need further assistance selecting the proper distributor, please contact us at support@s-5.com
@bhavadasaacbsp3274
Жыл бұрын
@@TheMetalRoofingAcademy Great news! Thank you for replying, I’ll check the link. Thanks again.
@kirodon
Жыл бұрын
i have used these s-5 foot regular these are easier to install. but to earth each foot takes alot of time
@TheMetalRoofingAcademy
Жыл бұрын
Thank you for your comment and I would like to get more info from you on what S-5! products you use and the array design. In most applications there is no need to ground each mount to the roof as the entire array will be grounded through either the rails or our PV Kits and then a single ground from the array can then be attached to the roof. Please reach out to us at support@s-5.com to provide more details if you like. Also, please see the videos from our Resource Center in the link that discuss wire management and grounding. www.s-5.com/metal-roof-resources/?pageNumber=1&postTypes=resource,case-studies,resource-video&search=wire%20management&sortType=title&sortOrder=ASC
@toots3020ph
2 жыл бұрын
Is this available in the Philippines
@TheMetalRoofingAcademy
Жыл бұрын
Please go to www.s-5.com/how-to-buy/?regionId=5f64e8531ff06d000afd4862 and check out this page out to find a distributor closet to you.
@letswalktogether90_
Жыл бұрын
I learn a lot from you
@waynecullen5739
Жыл бұрын
Ok I have installed this before and I can tell you that its great - until you have to wire and earth it.
@TheMetalRoofingAcademy
Жыл бұрын
Wire management and grounding with the PVKIT system is an easy task when designed and planned ahead. We also have cable clips, bonding jumper, and grounding clamps available (www.s-5.com/product-category/hardware/) to make the task even easier. Also, below are a few links to some of our videos that discuss best wire management practices. Wire Management Tips for Rail-less Solar Mounting - Part 1 - kzitem.info/news/bejne/0mqhqoB-ooKWgmUsi=DcmXwPoJ5rlKClmQ Wire Management Tips for Rail-less Solar Mounting - Part 2 - kzitem.info/news/bejne/y3d5rJeAaYhoapgsi=IrnqHLFXZIRwkf8X Best Wire Management Practices in Commercial Railed and Rail-less Solar PV - kzitem.info/news/bejne/kpCku5yVemKkhGksi=anaPKvW5xrAViGq-
@SolarizeYourLife
2 жыл бұрын
What about frameless panels??? The panels are only 8 mm thick...
@TheMetalRoofingAcademy
2 жыл бұрын
Currently S-5 PVKIT attachments only accommodate framed modules between 30mm - 46mm thick. However, there are racking systems for frameless modules that can be attached to metal roofs using our clamps or brackets. We are always developing and coming out with new & innovative products so follow us on social media and check our website often for new and updated products!
@sprtplt
4 ай бұрын
Nope. Flat mount will overheat under the panel, collect too much snow, can't be properly sun angled. There is no free lunch.
@TheMetalRoofingAcademy
4 ай бұрын
While some projects certainly still have more success with a tilt mount system, the roof top solar industry has largely shifted towards flush mount systems. This is mostly since module efficiency has improved to the point that the ROI from the project is often better with flush mount systems compared to tilt. Flush mount systems can have more modules/roof space, compared to tilted modules which can get better efficiency per module due to the ideal tilt, but module/area is lower since space is lost due to shadows from the raised modules. Tilt mount systems also face much greater wind forces compared to a flush mount system.
Пікірлер: 28