Maybe try getting some known-straight pieces of lumber like 2x6, 6x6, or 2x8 from the hardware store and set them on the mill. Roll the blade over them and see if it would have a consistent cut the whole length
@mnaylor1126
20 күн бұрын
Bill I have had my challenges with my mill I have a road range 5022 I started using timberwolf blades and have no issues since
@user-ji6qj5xw8t
21 күн бұрын
+ More usable wood if you would cut it in half .
@user-ji6qj5xw8t
21 күн бұрын
+ l mean shorter pieces , instead of 12 feet one piece ; you get 6 feet long but 4 pieces .
@nathanbrodeur
21 күн бұрын
Bill since your saw mill pad was poured it could have heaved or drooped throwing the track leveling screw jacks to not be level the woodmizer mills in there manual it says the screw jacks should be checked yearly or 2 times a year for ground expansion or contraction
@steveb7612
21 күн бұрын
I've spent 24 years working in a sawmill. Its not always easy or fun. Just have to keep trying different things and you will get it. Its always more fun sawing your own stuff than buying it.
@beaverfan1990
21 күн бұрын
A tip for wood drying an inch per year. So for example if it was three inches it would be three years and make sure that they are extremely flat on a flat service to begin with
@donnydenfeld2394
21 күн бұрын
It sure would have been easier to make several thinner cuts vs that massive second pass.
@billstmaxx
21 күн бұрын
I agree maybe 2'' passes
@upandadam9080
18 күн бұрын
@billstmaxx i think where you messed up some on that first log, is the way you leveled it, next time measure the pith (center of the log) to the bed of the mill, make that dimension the same on both ends, then start cutting your slabs off till you get to a decent size cant.
@jakeschisler7525
21 күн бұрын
Those Wood Mizer saws are nice. The one that is actually a trailer with all hydraulic system that turns the log are nice but not so cheap either
@Sawmillingwithj1973
20 күн бұрын
Just wanted to say Happy 4TH of July and God Bless Everyone out there
@MARKLOCKWOOD2012
21 күн бұрын
Jackery to blue etti solar units Jackery’s big unit has thirty amp plug plus it’s on its own cart it be wise to invest in your auto up n down on the woodland and a solar panels the draw back to jackery is no direct sunlight on the unit. Blue etti your fine. No no not water proof. My thoughts were use your green trailer set either unit in it while you work short extension cord Mind that Jackery either unit know what your running power wise Jackery does their units according to max wattage. So on stuff on owners manual look and find wattage then per unit look at double or triple because big draws drains it fast.
@Rigoknow
21 күн бұрын
👍
@lIlIlIlIlIlII-MerryChristmas
20 күн бұрын
What happen to the firework video
@mikebauer9202
20 күн бұрын
Buy the trailer for the sawmill.
@user-ji6qj5xw8t
21 күн бұрын
+ Bill , just get your self a leaf blower and run it for ten seconds after each cut . THE BLAD IS GOING STRAIT , NOTHING WRONG WITH IT , IT IS THE WOOD THAT ‘S GOT STUFF UNDER IT MAKING IT SITTING IN A DIFFERENT PLACE EVERY TIME YOU MOVE IT .🤑
Пікірлер: 21