hi there and again today , to much rain , thanks for dropping in john
@jacksanders7018
3 күн бұрын
fix it like you like it now, you will always be happy with it. thanks, I need some of that rain.
@fricknjeep
3 күн бұрын
hi there i would love ti send it your way , rain again today , thanks for stopping in john
@robertgreen8695
4 күн бұрын
As long as it works the way you need it to, then the cost really doesn't matter. Also, if it saves you time and aggravation, so be it.😊😊😊
@fricknjeep
3 күн бұрын
hi there i think you are right , thanks for dropping in john
@larrychernick3391
3 күн бұрын
It sounds like a lot of rain ☔️ 😮❤❤
@fricknjeep
3 күн бұрын
hi there it was more than i wanted to work around , raining again today , thanks for dropping on john
@larryvankirk7423
3 күн бұрын
I plumb forgot what the second valve line is for. Bypass from the pump?
@fricknjeep
3 күн бұрын
down the line i am planning on another pump on the back of the engine , off the cam shaft , john
@mikepanetta6529
4 күн бұрын
Have a good sinner
@williamellis8993
4 күн бұрын
Do you mean dinner?
@lawrencetirrell8414
11 сағат бұрын
Hi John. Sorry. Not following you. Been sleepy.😴😴😴😴 We had a " typical fall like rain 25th & 26th. We got " saved" from Hurricane Helene. Tennessee & Kentucky will be dumped w/ rain until 30th. Oddly. We were " dry" in Vermont. I believe. It's a " tug o' war" of rain & sun's evaporation process. Very strange & wet last summer here. 🤔🤔🤔😲😲😲😳😳😳😵💫😵💫😵💫 Back to hydraulic pump. I like the blue tube where it is. " Forgive me. If any thing happens to it. 🤐🤐🤐🙄🙄🙄😬😬😬😑😑😑 I'm a " huge fan" w/ lever shut off valves. I had the most difficult time w/ circular valves. Those valves & lime minerals is a disastrous results. NIGHTMARE! 🤬😡😠😤🥺🥺☹️☹️ My male best friend had those " same" valve nightmares. The lever valves are more expensive. I DON'T CARE! YEAH! 👏👏👏👏 I don't mind spending more. For something that works. 🥰🙂😉👍Your spare rusty parts is not important. The important thing you don't need to buy any. I'm ALWAYS glad to have rusty parts. Sometimes. You need to restock whatever your low in supplies. I like your hydraulic pump. 👏👏👏👏 Your not a old geezer! Your a talented, gifted, & experienced man. That why I follow you. Again. Thank you John. Have a good Saturday afternoon & evening. To John & Big Boss. 🥰🙂😉👍❤💜🙏🏻🙏🏻🙏🏻🙏🏻☀️🛠🔩
@jamesb9564
Күн бұрын
Hey John, Use the centre of the tee to go into the valve from the tank and then take off from the sides, then you don’t need to shit the tank
@williamellis8993
4 күн бұрын
When you showed us the valves in the last video, they were both in the Kubota with all your fittings. Bill
@fricknjeep
3 күн бұрын
hi there i had found another set i liked better , i found them later , john
@jamesdeery5377
3 күн бұрын
@fricknjeep that's always the way of it😂
@Frank-db6oj
3 күн бұрын
Looking good John 👍 Thanks for sharing
@jerryking2418
3 күн бұрын
Can hear the rain. Too bad you can't ship some of that to Phoenix. We're dry as a bone.
@geoffreykail9129
3 күн бұрын
If you turn your tee with the side out towards the tank you'll have less stick out and you can plumb down from the through side of the tee. You could also put the filters lower so as to not have so much up in the air and have a shorter bracket.
@jonrussell1122
3 күн бұрын
Could use a street elbow into the filter unit. That would shorten up the length.
@fricknjeep
3 күн бұрын
hi there didnt get any of them , but i think your right , thanks for stopping in john
@jonrussell1122
3 күн бұрын
I'm just trying to save you from having to move the whole tank over. Time is valuable.
@fricknjeep
3 күн бұрын
@@jonrussell1122 hi there it would take longer to go to the store , 20 miles away , but have to got that way tomorrow thanks john
Пікірлер: 25