You’ve got the nicest looking sawmill shed on KZitem!
@AaronTurnwald
Жыл бұрын
Thanks Jared!
@BissellMapleFarm
Жыл бұрын
That is sweet! I agree!
@thesheff79
Жыл бұрын
That is super nice, I left mine open sides as I'm gonna continue building on to it. I'll agree with others. This is one of the nicer sheds I've seen on youtube.
@AaronTurnwald
Жыл бұрын
Thanks, I'll have to check out your channel too!
@chriskourlos4407
Жыл бұрын
Perfect shed design. Great job dudes!!! Leaning on the everlasting arms of Jesus. God bless both you and daddy!!! Priceless. God bless you both richly even more than you ask or think! I love it!!! Thankyou for posting.
@AaronTurnwald
Жыл бұрын
Thank you for watching!
@kevincurry859
4 ай бұрын
Very nice looking shed . And well built.
@ssprofirewood
Жыл бұрын
Aaron, that is such a nice sawmill shed. Your Dad and you did a great job with the build.
@AaronTurnwald
Жыл бұрын
Thank you!
@PeterLee-zn3jl
9 ай бұрын
Bus Huxley shed with back flap for cleanout is superb, too
@toddwheeler1526
8 ай бұрын
Beautiful work gentlemen. Hat's off to the veteran builder and inspector. Retired GC and inspector myself. My mill is due to be delivered by the end of October 23. My 30 acres of big trees await for many projects similar to yours. Really good stuff, thank you for sharing your wonderful project and skill sets. 👍
@goatman6392
7 ай бұрын
Really nice shed & Awesome to be able to build it with your Dad. Don't miss any opportunity's with him. I sure miss my Dad, we built a lot together too. God Bless
@TimothyBrewer
Жыл бұрын
I absolutely love this shed. I've been looking for a design like this for a machine shed. great video and I'll probably watch it several time when I start mine this summer!
@AaronTurnwald
Жыл бұрын
Awesome! Thanks for watching!
@guymcelwee3489
Жыл бұрын
Thank you for showing us that shed you guys built. Very nice. Gonna be building one myself soon.
@AaronTurnwald
Жыл бұрын
Thanks for watching! Its so nice to have the mill always set up ready to go in its own shed. Good luck on your shed, its well worth the effort!
@MrSparks701
5 ай бұрын
The track cover does really make it look awesome. Very nice. Thanks for sharing.
@vinniecarter7183
Жыл бұрын
Very nice building, good job.thank your dad for his help and knowledge. I lost my dad to an accident 45 years ago today. Always in my heart and memories .
@AaronTurnwald
Жыл бұрын
Thank you for watching and sharing your story. Your right and im sorry to hear about your father.
@maudwelford1843
Жыл бұрын
A smart, clean set up, well don dad and you, God bless 🙏👏👏👏👏👏👏❤️🇬🇧
@Mcss-lu5hv
Жыл бұрын
Thanks for the walk through. Nice!
@thomasgardner5872
Жыл бұрын
One of the coolest and functional sheds I ve seen ! Awesome!
@AaronTurnwald
Жыл бұрын
Thank you, glad you could take time to watch!
@sevengulches
Жыл бұрын
WOW this is an impressive sawmill shed! Thanks for sharing
@AaronTurnwald
Жыл бұрын
Thank you! Apreciate you taking the time to watch.
@James-ib2kp
5 ай бұрын
Very attractive looking shed. Enjoy
@coldspring624
10 ай бұрын
Now that is a great sawmill shed.
@a_farm_west_of_boring
9 ай бұрын
Very nice! I love the barn doors!
@claudepaquette5827
Жыл бұрын
Beautiful build.
@KuzweKanfarms
Жыл бұрын
I love it. Very nice job
@smokeybailey3080
Жыл бұрын
Nice looking building
@Stuammy
Жыл бұрын
That’s beautiful!
@AaronTurnwald
Жыл бұрын
Thanks for watching!
@projectsadventuresfarmlife
Жыл бұрын
Looking good!
@CrossroadToCountry
Жыл бұрын
Would gladly pay for plans, very nicely done. Love it!
@myoutdoorlife3833
8 ай бұрын
Wicked nice!
@blackacreage4868
Жыл бұрын
Awesome! Would love to see your wood storage setup 👍
@AaronTurnwald
Жыл бұрын
Whew! You dont want to see that! I JUst have all my dried slabs in the back of my very Junk barn to keep them dry.(wherever the roof doesn't leak.) Nothing special to it. They are just stacked and standing up where they fit.
@OldIronAcres
Жыл бұрын
VERY cool barn!! Nice going!
@AaronTurnwald
Жыл бұрын
Thanks!
@fricknjeep
Жыл бұрын
hi there real nice , happy sawing john
@AaronTurnwald
Жыл бұрын
Thanks for watching! I check out your videos here and there too!
@jamesharless5357
4 ай бұрын
Very nice mill, and great video!👍🏻
@AaronTurnwald
4 ай бұрын
Thanks for watching!
@garyblevins3532
10 ай бұрын
Nice sawmill shed
@jackiewallace2017
10 ай бұрын
That’s nice now I have ideas for my shed just bought a saw
@AaronTurnwald
10 ай бұрын
Have fun!
@cmw184
10 ай бұрын
Gonna build one in a year or 2, super cool yo.
@RossOnTheLand
Жыл бұрын
Wow! What an amazing build. We'd love to build some barns like that. I think a cement floor would be great. Odd about the woodpeckers... Weird....
@AaronTurnwald
Жыл бұрын
Thanks! i love the fresh wood siding look too! Will be protecting with some type of deck finish this spring.
@toddcaskey9984
11 ай бұрын
Awesomeness
@daveblevins
Жыл бұрын
Very nice shed 👌 Well done ✅
@AaronTurnwald
Жыл бұрын
Thank you!
@iaroadkill2354
Жыл бұрын
Very nice. I hope to get a mill soon and this will be my first project to protect my investment.
@paule4696
Жыл бұрын
She's a real beauty. I'm also from Michigan. Just got an HM130MAX and may borrow some of your ideas when I build mine.
@AaronTurnwald
Жыл бұрын
Awesome!
@marinrotaru2986
5 ай бұрын
Beautyful. Wery good. 😊
@cabinman
Жыл бұрын
I’ve been enjoying your videos a lot and I don’t remember if I’ve commented or not because I mostly watch from the TV so if I comment I have to go to my phone or computer. I recently bought a HM126 and set it up outside, so I’m hoping to get a structure built over it before too long. Thanks for the videos and hope you can keep coming up with some good material.
@AaronTurnwald
Жыл бұрын
Thanks for watching!
@PeterLee-zn3jl
9 ай бұрын
Now thats a SAWMILL SHED..!
@littlegriffoffgridalberta6837
Жыл бұрын
That is a very nice mill shed if I ever seen one ! I have to build one I have an HM122 on its way & hoping to get it in a shed before winter, but I have so many projects some days don't know where to start lol,
@AaronTurnwald
Жыл бұрын
Congratulations on the new mill! Thanks for watching!
@baxterlehman32
Жыл бұрын
Very nice sawmill shed. I'm sure it's nice to have a father with all those years of construction experience. Oh and the woodpeckers went away, wink wink.🤫
@AaronTurnwald
Жыл бұрын
Those dang woodpeckers. Probably migrated for winter i bet. Yes he is very knowledgeable and i try to learn all i can on projects like this! Thanks for watching!
@hpw59
Жыл бұрын
very nice
@AaronTurnwald
Жыл бұрын
Thank you!
@offgridwithjimbo1437
Жыл бұрын
Yea my woodland mills would look great in there. Haha. Bravo
@AaronTurnwald
Жыл бұрын
Bring it over, we can cram it in and do a video with 2 sawmills in one shed hahaha!
@offgridwithjimbo1437
Жыл бұрын
@Aaron Turnwald haha. I would if it wasn't a permanent fixture in the woods of maine. Definitely subscribed to you channel brotha!!!
@MrPDGee
Жыл бұрын
What a great sawmill building! I like the fact you can button it up from the elements. But I do have a question for you. How do you get the mill trailer in and out of the shed? I also have the Woodlander XL (long bed/trailer) and I do take it to other people's property to mill some logs for them (easier to trailer the sawmill to the logs than the logs to the mill). My own ideas for a mill building (which I haven't built yet because of 'analysis paralysis') would need a way to easily get the trailer in and out of the shed. Plans I've sketched up so far always have the end walls open so I can drive the trailer in and out...
@AaronTurnwald
Жыл бұрын
Tractors forks reach in and hook up the trailer safety chains. Back it up a little then pull it out on an angle.
@snurb48
6 ай бұрын
Very clever on the door track above. I see a deep strut with a trolley set up. Did you use a track system for the bottom so the wind can't take the doors off? I like it, wish I could get my hands on a Header Beam like that! Thanks.
@AaronTurnwald
6 ай бұрын
The doors each have a pin that drops at bottoms into concrete plastic sleeve hole.
@petrafarla5439
5 ай бұрын
Beautifull building. Like to know how wide your board and batten is . Im in the process of milling siding for my house . I find your woodshed just wonderfull,and thought of doing something similar. Thanks 👍👍
@AaronTurnwald
5 ай бұрын
Thank you! The boards are 11 inch wide and the battons are 2 inch.
@adirondackwoodsman
Жыл бұрын
Very nice job! Excellent Construction! Plan to build one this summer that I will put on my channel. Be careful with the gutters and a metal roof. If you get a lot of snow, it could easily take the gutter out when it slides off. I can have snow 1-2' thick on my camp roof and it will take off anything in its path. I just subscribed. Take a look at my camp walk through when you get a minute and let me know what you think. I did it all with wood off of my property.
@AaronTurnwald
Жыл бұрын
Thanks for the tips!
@tombooks1410
5 ай бұрын
Have you ever thought about doing a short video on the I-gaging measuring system that you have on your mill? I have an older hm126 and the measurements read greater the closer that you get to the log bunks.
@AaronTurnwald
5 ай бұрын
Hadnt thought of it. I have not noticed an incremental increase in board size like you mention. Ill have to test it out.
@tombooks1410
5 ай бұрын
The board size stays the same. It’s the scale that reads larger as you drop the saw head. It’s because on the older saws the pointer moves and the log scale is stationary. I’m very interested in the digital readout since I’ve put one on my wood planer.
@AaronTurnwald
5 ай бұрын
@@tombooks1410 ok, i thought you were saying you had a dogital readout and its was increasing incrementally. I was hesitant about the digital readout at first. But now my dad and I use it exclusively withoutout issue. Highly recommended one. Just take a little fab work for some brackets to mount it. Zero issue so far.
@vinniecarter7183
Жыл бұрын
When you put your gutter up, catch the water in a tank to use for your saw. Save money and time to haul from another source.
@johnwoody4905
Жыл бұрын
Good video and job really nice sawmill shed. I have not built doors for mine yet built mine out of hardwood. We have huge problem with bee's eating up pine wood. Do you have that trouble where you are? Take care, be safe and well.
@AaronTurnwald
Жыл бұрын
I forgot, yes i did have a bald face hornet problem with them eating the siding. I found the nest and blew it out of the with a 12 gauge. Problem went away.
@bard44
Жыл бұрын
I'm surprised you haven't got a wood stoe in there by the saw head. Would keep warmer in the colder months.
@AaronTurnwald
Жыл бұрын
got one right in the barn 30 feet away. Maybe need to run a duct out there lol
@ryangroat7724
Жыл бұрын
Solid brother! What kind of wood did you use for siding and for dimensional lumber inside? Did you dry it first or was it green? I'm going to be building something very similar thank you for you and your dad's hard work and inspiration 👊🏼
@AaronTurnwald
Жыл бұрын
Everything we cut was green white pine. The main beam above the door was cut 4 years ago and is spruce. Thanks for watching!
@ryangroat7724
Жыл бұрын
@@AaronTurnwald Nice, how thick did you mill the siding? Is any of it planed or all rough cut?
@AaronTurnwald
Жыл бұрын
@@ryangroat7724 all rough cut at 1 1/8 inch.
@thebow2626
Жыл бұрын
I live in Michigan too did they require you to grade the wood in order to use it for building? I have been considering the HD 36 and a molder. How do you like your mill and would you have opted to do anything differently in your purchase? I have been on the fence for a while now, and concerned how much time to mill it would take. The saw mill building looks awesome! How long did it take you to mill all the wood for it, was it just weekends? Did you dry the wood before building.. sorry for so many questions and appreciate any feedback..everything looks amazing, awesome job!
@AaronTurnwald
Жыл бұрын
No wood only needs grading around here when its used for like a house. Not barns or out buildings. The mill has treated us very well. Any little issue was quickly remedied by the company while it was in warranty. Dad and i milled all the boards over a couple weekends and let dry for couple weeks. Thanks for watching!
@markrencher5863
Жыл бұрын
Great looking saw mill. Would you sell a copy of the plans? I really like the looks and the function of your saw mill.
@AaronTurnwald
Жыл бұрын
Back in the video of the mill shed i say kinda how it was built and what boards. Thabks for watching!
@konoctiswigwam8130
6 ай бұрын
Nice looking shed!👏 EDIT: what do you use to move the logs on the mill? A hydraulic log turner is not a simple proposition and lifts and tractors are painful for a single person...🤔
@AaronTurnwald
5 ай бұрын
Tractor with forks works great for the big logs and a cant hook works fine by hand on smaller or medium logs.
@lubapaul
Жыл бұрын
looks awesome, how wide are the siding boards and battens?
@AaronTurnwald
Жыл бұрын
12 inch wide boards and 2 inch battens. Thanks for watching!
@JohnDailey-tw7ze
Жыл бұрын
where in Michigan are you I love to come to check it out , I am planning on buying a mill this is just what I am wanting to do
@excaliburmining6194
Жыл бұрын
ever have any issues tractoring in a big log through the opening, or room around it to work and turn logs?
@AaronTurnwald
Жыл бұрын
No issues. Door opening is 18 foot wide. Mill will take a log just under 17ft max.
@laurarosekrug777
Жыл бұрын
Hi Aaron, my husband and I love your sawmill shed! Do you sell building plans for this shed? Also, how did you cut the 22' header beam above the doors, or did you buy that? Thank you & have a great day.
@AaronTurnwald
Жыл бұрын
I dont have plans for it, though they have been asked for a lot. I might look into it. The 22 ft beam was cut on out mill. Had to do the hangover cut method because our mill only takes 16 ft 9 inch log.
@laurarosekrug777
Жыл бұрын
@@AaronTurnwald thank you for the reply! Can you please tell us what species you used for the header beam? We really hope you offer the plans for sale!
@AaronTurnwald
Жыл бұрын
@@laurarosekrug777 yes the beam was just a vlue spruce tree log from a neighbors tree we cut down. I wpuld have rather had white pine but the spruce was available at that length. Works just fine.
@laurarosekrug777
Жыл бұрын
@@AaronTurnwald Thank you!
@maniachill3069
Жыл бұрын
Woodpeckers don't peck random holes, if they dug a hole, there was an insect larva in that board.
@AaronTurnwald
Жыл бұрын
They were only doing it in in that one corner. And in the neighbors store bought lumber built garden shed, and the trim on his house. Also on 1 board on my kiln thats been built for 5 yrs.
@anneamtoj4398
4 ай бұрын
Great video. Just what we’re looking for. Can we get copies of the drawings or specs?
@AaronTurnwald
4 ай бұрын
We just built it as we went. No documents other than this walk through video. Basicly pole barn style framing.
@rickm3532
Жыл бұрын
Woodpeckers missing wink wink...lol😂
@bryancrump1155
Жыл бұрын
How far apart are the 6x6 on your back wall. I’ve been thinking of a sawmill shed Now I think I have the one I want to build.
@AaronTurnwald
Жыл бұрын
8ft
@karahanson5810
Жыл бұрын
Do you treat the rough cut lumber with anything? It's nice and "yellow". I live deep South and have to fight mold and bugs. New at sawmilling.
@karahanson5810
Жыл бұрын
Would also pay for plans on that one.
@AaronTurnwald
Жыл бұрын
Ya it was put up as fresh cut so ive been giving it time to dry some. Ill put some protection on it this spring. Thanks for watching!
@douglasboxall9840
3 ай бұрын
What acool set u
@user-bb9xn9uy1g
2 ай бұрын
Super looking... Would you tell me the height of your front and back of roof, and height of the door.
@AaronTurnwald
2 ай бұрын
Yes i can measure them tomorrow
@AaronTurnwald
2 ай бұрын
13ft tall front side of roof, 8.5 ft back short side of roof, 8ft to top or door.
@Jcreek201
6 ай бұрын
I hate that I just found this video.... I've been working slowly drawing up and designing a shed for our mill for last month or two, picking ideas from several videos. After seeing this....I'm starting from scratch first thing tomorrow. This is absolutely gorgeous and exactly what I was looking for. Don't suppose you have any drawings you'd share?
@AaronTurnwald
6 ай бұрын
Thanks but no drawing, sorry.
@Jcreek201
6 ай бұрын
@@AaronTurnwald No worries. How did you do the cantilever beams for the doors? Did you just laminate three 2x10s to the face of the beam?
@AaronTurnwald
6 ай бұрын
@@Jcreek201 i do not remember. Will have to look next time im out there.
@user-su4mo5ur2y
2 ай бұрын
What Spies’s of wood did you use for the shed build?
@AaronTurnwald
2 ай бұрын
White pine
@randyhuybrecht9346
5 ай бұрын
side wall bracing ?
@AaronTurnwald
5 ай бұрын
Only what you see. Its framing is built exactly like a standard pole barn would be framed. All building code inspections passed easily.
@huntermcbride6005
Жыл бұрын
What is the height on front and rear post?
@AaronTurnwald
Жыл бұрын
Hi, do you mean the posts that go into the ground?
@someonerobloxytroadto200su8
Жыл бұрын
Do you have a way to contact you about the shed materials and plans?
@AaronTurnwald
Жыл бұрын
No sorry, everything is basicly outlined in the video. No intentions of writing plans up. Thanks for asking.
@neilheartwick2911
Жыл бұрын
ARE YOU GOING TO SAVE THE RAIN WATER FOR THE MILL? I WOULD.
@AaronTurnwald
Жыл бұрын
Not sure what i would use it for.
@WideCutSawmill
Жыл бұрын
Hahaha! 8:39
@AaronTurnwald
Жыл бұрын
LOL
@billwood5502
Жыл бұрын
How do you get it in and out, If you need to
@AaronTurnwald
Жыл бұрын
Hook the front trailer toungue chains onto the tractor forks, pull the front end out on angle, sit it down. Move the tractor over rehook up, pull the whole mill right out. Takes about 2 or 3 minutes.
@billwood5502
Жыл бұрын
@@AaronTurnwald awesome. Wasn't sure if there was enough room to swing it out. Thanks.
Пікірлер: 141