I recently created a puppet of a suit of armor (for stop motion animation) and so I wanted a clear protective coat. You were very correct, the clear spray made for this completely ruins the mirror finish. But I had success spraying several coats of Alclad II Lacquer Gloss Klear Kote ALC-310 over it. I had also used it in the past for a clear coat over Molotow chrome marker. I had total success with it in every way so, I highly recommend it. Thanks for the tutorial, I watched it numerous times before making my purchase, it was a great help.
@Starganderfish
3 жыл бұрын
Would have been great to see comparisons with others chromes - Alclad, Molotow, even Spax Stix through an airbrush. I'd also be curious to see how those other paints perform on the clear trays as you did here.
@craft-o-matic2377
3 жыл бұрын
He has other videos of all those products.
@outlawkiller42
3 жыл бұрын
I used this a lot when I was RC racing and it works great. The backer is nice keeps the paint in the body and helps the chrome pop a little more in my opinion. never sprayed it through a airbrush but loved the spray cans for what they are.
@barbatosrex9473
3 жыл бұрын
I tested the airbrush paint of these and they are great too, good product 👍
@jakubmrkus1274
Жыл бұрын
is it only for plastic or can I use the spray on engine parts as well?
@bluepants7338
2 жыл бұрын
Thanks for showing this off . I just started gunpla and i got the idea of getting a clear kit then spraying this on the inside . After seeing this im definitely going to give it a go
@MH-kt9pn
Жыл бұрын
Thank you for the awesome review! Much appreciated!!!
@barbatosrex9473
Жыл бұрын
You're welcome buddy
@catalinpaduretu7033
3 жыл бұрын
I would have expected to bring out the alclad spoons into the frame for comparison. Also you were talking about topcoating these and I was thinking on maybe use that Aqua Gloss from Alclad that is recommended for their chromes? Thanks for the upload anyways, top content as always.
@johnhughes2653
3 жыл бұрын
Getting hold of the stuff is a problem in the UK. No one over here seems to stock it, it's unavailable on Amazon & Ebay. Supplies seem short everywhere!
@ronzufelt1428
3 жыл бұрын
My favorite chrome. You can really buff it to a shine. Use it all the time.
@73chevy22
3 жыл бұрын
Have you found the best results with just the mirror chrome or the black backer with chrome on top?
@ronzufelt1428
3 жыл бұрын
@@73chevy22 You need to spray over a gloss black. Never have used their gloss black. I have some need to try to see if it is better than Tamiya gloss black.
@73chevy22
3 жыл бұрын
@@ronzufelt1428 Oh, ok, thanks for the reply and advice. I'm still trying to learn so I appreciate the tips.
@edgullett2624
2 жыл бұрын
Just looked on Amazon. Pair is running about $36. 1-17-22
@ryanokeefe12
3 жыл бұрын
spray the chrome on the inside of the tray only, then apply the black over the top of the chrome, again on the inside of the tray only. Similar to how you would paint an RC body/shell.. then the underside/outside of the tray should be nearly a perfect mirror. If you want the mirror on the inside, just apply the chrome on the underside and then back that with black (leaving the inside clean).. then the inside should be a nearly perfect mirror.
@bigchef2112
3 жыл бұрын
Wow! That’s some amazing looking stuff. Love it. I might have to pick some up.👍👍
@williamlorimer8927
2 жыл бұрын
Ty this is just what I need in a can!!!! Hope it's in stock
@suzanneweirick2551
3 жыл бұрын
New to your channel , but really enjoy! Thank You Brad
@barbatosrex9473
3 жыл бұрын
Thanks Suzanne , thanks for watching 👍
@dtejada1988
3 жыл бұрын
This is a great video, thanks a lot !😎👍🏼very helpful and informative
@hurricane2649
2 жыл бұрын
I have a gorgeous 76 Eldorado convertible with 48K that needs the mirror and door handle attention. For the age of the car and being original, they would be considered in great shape. However, I have watched your videos many times and would like to ask a question. Would you recommend this paint for side mirrors and door handles that are already chrome just very faded and has some pitting? Of course, the pitting would have to be drilled and filled "like a filling for a tooth". From what I can see from your "very well done" videos is that the finish on a plastic spoon would be acceptable to me on my vintage Cadillac. Clearly, you know so much more about this than I do. I do have the impossible to get plastic chrome wraps that go around the bumper extension that is product would work great for. I have looked for "NOS" new old stock parts and I am unable to find them. If I do the price would scare you into thinking you have sisters. Thanks for your vids as I am SURE they have saved me a ton of time and the possibility of destroying an original part that can not be replaced.
@kklum6998
Жыл бұрын
So it needs something that has already highly glossy background in order for it to look like a mirror or chrome finish. Understood.
@mikeszczutkowski3066
2 жыл бұрын
I would have liked to see what the black on the back of the tray and the mirror paint sprayed on the inside looked like I know spraying the inside would create blow back towards you but it would have been shinier and more mirror like.
@droid_protocol_official
3 жыл бұрын
I’ve been using this on a helmet, and I’ve wasted about 4 cans, because I was trying to use different basecoats. I discovered that it was etching any paint that isn’t spazstix. I tried their black backer but I could only get it for my airbrush but the result was absolutely terrible. I discovered that it’s incredible over a water based polyurethane gloss and over resin. I also accidentally discovered a gold basecoat sealed with urethane or resin gave me a nice reflective gold. Unfortunately I can’t get any spazstix in Australia right now so I can’t progress on my project. But I watch your videos religiously thank you so much. Your channel is my 1 stop shop!
@mattgault2497
2 жыл бұрын
On your second experiment, are you saying mirror chrome over a gold basecoat gave you gold chrome results? I’ve been preparing for a project I hope to achieve gold chrome on and would be super appreciative of any tips you might have! Happy Making!
@kuntri4389
2 жыл бұрын
Why can't you get it imported in Australia?
@AyumiBushido
Жыл бұрын
so you think it would work if we use a gloss paint or lacquer Acrylic clear coat for the chrome to bring out the mirror shine?
@earlyculyer4103
2 жыл бұрын
I would like to see the chrome over 3.0 black!
@blue4life175
3 жыл бұрын
Great video as always Rex! Can you try spraying some candies or cleats on top of it to see if it can be used with acrylics and enamels if possible? Thanks buddy!
@alfredlukasek8644
2 жыл бұрын
Warming the can increases the pressure. It DOES NOT affect the viscosity of the liquid in the can.
@barbatosrex9473
2 жыл бұрын
I was told in 1985 by a Testors rep to warm the can because a warmer fluid flowed better out of the nozzle. Here in New England there's more cold days than warm. Cold paint doesn't level as well as warm paint. In my 40 years in the hobby and owning a hobby shop and working at a hobby distributor I ran into to dozens of hobbyist who all did the same. It's all I've ever known with spray cans.
@alfredlukasek8644
2 жыл бұрын
@@barbatosrex9473 still stand by my statement. I’ll have to research. Thanks for the response.
@briangipperich1933
3 жыл бұрын
Looking forward the Chromair tests....just wish Spraygunner had the sets in stock and more colors. Chromair also has a separate website at the same mailing address. Odd thing is prices, availabity and shipping differs!
@barbatosrex9473
3 жыл бұрын
Let me see if they'll give me a code or affiliate link to the official Chroma Air website. I'll call them Monday before I review the paint.
@Mr.boxxchevy
Жыл бұрын
I tried it but it looks nothing like this just looks silver with minimal mirror look😒 but I have been painting it outside it's like 40 degrees not sure if that plays a role
@melvinmalijan5662
3 жыл бұрын
Here in the philippines chrome painting is too expensive for my motorcycle...that's why I need your help..thank you so much...
@russsandbags1967
Жыл бұрын
Any advice on this? I can’t get it to Mirror at all. Tried many different methods
@davidhiscock1969
3 жыл бұрын
Spaz Stik ?? Wow that's a brave call on the brand name
@chriselliott726
3 жыл бұрын
I would say bad call ....very bad call.
@MB-THX1138
Жыл бұрын
Memorable 🤣
@MH-kt9pn
Жыл бұрын
Well it’s SPAZ STIX 🙄
@LuresandLunkers1969z
3 жыл бұрын
Cool
@ZILLA....
3 жыл бұрын
Interesting, they sell an airbrush ready version of this stuff. It seems quite durable too, what would be the best chrome paint from your perspective? Molotow has been good to be since it doesn't require a black base, and alcad chrome is not bad but rubs off very easily
@barbatosrex9473
3 жыл бұрын
Check out my channel, I tested almost every chrome paint including these in airbrush form
@JS-jt5bi
3 жыл бұрын
Was wondering if the plastic trays had residual mold separator that could interfere with the painting?
@normandothegreat
Жыл бұрын
Have you tried the Createx Colors water based UVLS High Gloss Clear over any/all worthy chrome paints yet?
@barbatosrex9473
Жыл бұрын
I just got some recently. I will be testing it out
@Pursnikity_20022
2 жыл бұрын
Damn those are small Glad I bought 4
@frankrubeshaw4673
3 жыл бұрын
I’m looking at getting an air brush booth. Masters portable air brush booth from Amazon. My concern is that it’s black. What are your thoughts. It has three LED lights, middle and front on each side and duel fans. Wondering if it would be to dark.
@RestorationAustralia
3 жыл бұрын
Great looking product indeed.
@barbatosrex9473
3 жыл бұрын
It really is!
@RestorationAustralia
3 жыл бұрын
@@barbatosrex9473 Sadly we don't have them here in Australia.
@barbatosrex9473
3 жыл бұрын
@@RestorationAustralia does SMS make a chrome?
@RestorationAustralia
3 жыл бұрын
@@barbatosrex9473 I don't know that product.
@FrankRizzo707
2 жыл бұрын
Try spraying white gloss then the chrome.
@frankupnxt
10 ай бұрын
Will this paint work on aluminum wheels if prepped?
@barbatosrex9473
10 ай бұрын
It really couldn't take the elements. You would probably need a auto grade 2K top coat to protect it
@frankupnxt
9 ай бұрын
@@barbatosrex9473 will that take away the shine?
@barbatosrex9473
9 ай бұрын
It does take away some of the shine
@GERINHO591
3 жыл бұрын
It looks like a very good end result. But I have a doubt. Does it stand up to high temperatures. I intend to apply it to the headlight reflectors.
@barbatosrex9473
3 жыл бұрын
Your probably better off using Rust-Oleum or Krylon as those will stand up to the elements better. However they definitely won't look as good as this
@raymendoza5453
3 жыл бұрын
Would you recommend using this to chrome the insides of my tail lights?
@condimentcars
3 жыл бұрын
I can not get this result I ordered the stuff. What is reasoning any tips or tricks? Temperature in room? Inside only or what? Black backer goes on just like video but the mirror chrome does not….😥
@barbatosrex9473
3 жыл бұрын
Extremely light coats. And probably only 2 coats should do it. But start with mega light coats. Did you get this exact chrome, they make 2, one is for plastic and the other is for lexan plastic RC car bodies
@condimentcars
3 жыл бұрын
@@barbatosrex9473 they make two types. whatttttt what produc/ part numbers should I have for plastic (3D printed something custom black plastic that I’m trying to convert to look like factory emblem on car)
@franksilverstein3339
3 жыл бұрын
BACK IT WITH GLOSS WHITE, BRIGHTER CHROME.
@DisgruntledPigumon
3 жыл бұрын
So before this you thought Alclad II was the best. Is this better? Also, spraying the underside doesn’t count. You’re looking through the clear plastic at a smooth surface. That’s how real mirrors are made. You should really only be testing spraying onto an opaque surface.
@ontosewing8784
Жыл бұрын
Ck out your video, like the way you explained your use of the product, would like to kn if you can pick that up at a local store, or is a online only
@barbatosrex9473
Жыл бұрын
Get this paint here amzn.to/3UB8UnH
@monti7771
3 жыл бұрын
Like your testing can you try it on a hotwheels diecast
@jakubmrkus1274
Жыл бұрын
is it only for plastic or can I use the spray on engine parts as well?
@barbatosrex9473
Жыл бұрын
These are made for plastic models
@panamapapaya9480
3 жыл бұрын
would using their candy spray paint over this chrome give a candy chrome look?
@barbatosrex9473
3 жыл бұрын
Absolutely. I will be testing that out too, just waiting for it to come in
@panamapapaya9480
3 жыл бұрын
@@barbatosrex9473 sweet! you think clearing with their “ultimate clear coat” would ruin the finish or?
@sohchx
3 жыл бұрын
Spaz is great stuff but recently I have moved over to Molotow which eliminates the need for a black backer
@d.s.w7779
3 жыл бұрын
How tuff is molotow? Durable?
@stevenwalker1883
2 жыл бұрын
Molotov is quite durable if let to dry for about a month , don't clear coat it ! .
@theplayernkc
3 жыл бұрын
Where did you get the black backer for $10?
@ronbonner1981
3 жыл бұрын
I've never seen you use any product as a foreign object agitator in the mixing of your paints. I assume you find that unnecessary, is that correct
@barbatosrex9473
3 жыл бұрын
I've had some rust on me so I never use them unless they come in the bottle by the manufacturer. I've read that Hematite beads work great and don't rust. They sell them everywhere including the chain art stores
@ronbonner1981
3 жыл бұрын
@@barbatosrex9473 those beads are also ferrous, so I still fear they rust too. I'm thinking about glass beads as a possibility.
@wadedog4280
Жыл бұрын
Can this paint be used on steel and get the same effect ? Does it need to have a clear coat over top of the chrome?
@barbatosrex9473
Жыл бұрын
If it's going to be handled then you should put a top coat. Unfortunately you will lose a bit of the chrome look to it. You can use it on steel
@wadedog4280
Жыл бұрын
@@barbatosrex9473 thank you
@kevinlow69420
2 жыл бұрын
The question is what clear can be used to spray yellow clear over it to get gold chrome (or any color chrome)
@barbatosrex9473
2 жыл бұрын
I did a video on Modo Gold Chrome. A candy yellow or a clear brown over this too might give you what you're looking for
@kevinlow69420
2 жыл бұрын
@@barbatosrex9473 thanks I'll check it out
@meanf1502
3 жыл бұрын
I did my xmaxx body with the red an backed it with this crome an it's so mean looking an a light spray of red
@barbatosrex9473
3 жыл бұрын
Sounds awesome, these paints are great. I was impressed with them
@alexigaitan633
3 жыл бұрын
Will this withstand heat from an engine.
@jeromebaker7562
3 жыл бұрын
would you use this on a car bumper
@JomasterTheSecond
3 жыл бұрын
You think going over it with a Tamiya clear red or clear blue would work for an easy candy colour finish?
@barbatosrex9473
3 жыл бұрын
Yes, Tamiya Clear paints work perfect over this 👍
@JomasterTheSecond
3 жыл бұрын
@@barbatosrex9473 Absolutely ace - that's something I'm happy to hear!
@stephengrenot7039
3 жыл бұрын
I've user their Candy Apple blue and it rocks.
@barbatosrex9473
3 жыл бұрын
I will be trying those out for sure after seeing these results
@dannypino3130
3 жыл бұрын
@@barbatosrex9473 I got the harbor freight airbrush after watching your video and so far I love it. I subscribed and I love your videos thank you so much! What do you think about gravity colors and their chrom effect?
@barbatosrex9473
3 жыл бұрын
@@dannypino3130 I'm having trouble getting Gravity paint. Never showed up from the Florida store so I'm thinking I have to try the Spanish store
@dannypino3130
3 жыл бұрын
@@barbatosrex9473 what do you mean by the Florida store? I have bought from there website I have been waiting for about a week now. Hope it’ll be here soon because I spent over 100 on paints for future builds
@barbatosrex9473
3 жыл бұрын
@@dannypino3130 they have a place in the US and one in Spain. But it's not the same company. They had a huge fight and broke up into 2 companies. The bad news for me is the US store has a massive bad reputation of not fulfilling orders. Check out reddit on the company. I'm going to have to buy from Spain and wait for the shipping
@scenariostudios9763
2 жыл бұрын
Is it safe to eat with the sprayed spoons?
@barbatosrex9473
2 жыл бұрын
Only for androids
@jamesnord9806
3 жыл бұрын
Your supposed to spray one on each side of the plastic black on one side chrome on the other side
@barbatosrex9473
3 жыл бұрын
That's true when spraying a clear polycarbonate R/C body but if your spraying a Gunpla kit your dealing with solid plastic so the black goes on top like the Alclad
@emansuela_real
3 жыл бұрын
How long was the Black Backer sitting before spraying the Mirror Chrome?
@barbatosrex9473
3 жыл бұрын
About an hour or 2
@kevinm3751
3 жыл бұрын
Been looking at Black 3.0 and see where there is some making the claim that this new product called Musou Black is even more true black. Can you test this and see if the stories are true?
@barbatosrex9473
3 жыл бұрын
They actually contacted me and they're sending me a jar for testing. I'll post it as soon as I get it
@kevinm3751
3 жыл бұрын
@@barbatosrex9473 Awesome, yea I should have looked I see you did a test of the 3.0. Very interest in seeing how someone can get more black than the 3.0!
@rorywatts1882
3 жыл бұрын
Which would you say that you like more, Alclad II Chrome or the Spastic ???
@barbatosrex9473
3 жыл бұрын
While Spaz is great I'd have to say Alclad. The little jar of Alclad goes a long way as you just Mist it on. It gives you more control on what your trying to achieve.
@rorywatts1882
3 жыл бұрын
@@barbatosrex9473 thank you. I purchased Alclad with the intentions of painting my Mando Helmet I 3D printed. Put on a good krypton gloss black base, lightly sanded, and did 3 coats of clear. I'm afraid to paint it however because the spoons I've tested keep coming out a muddy gray instead of chrome. I also tried the Airframe Aluminum, and have the same result. Using my airbrush to apply the Alclad, my compressor is dialed down to about 25psi...is that too much?
@barbatosrex9473
3 жыл бұрын
@@rorywatts1882 yes, 15 psi is what you should be at
@rorywatts1882
3 жыл бұрын
@@barbatosrex9473 thank you, I though maybe because it's a larger project that maybe I needed more pressure. I'll turn pressure down and try again.
@barbatosrex9473
3 жыл бұрын
@@rorywatts1882 low pressure and just lightly Mist it on. You'll see the difference
@lma331
3 жыл бұрын
Been curious, would you happen to know how strong your exhaust fan on your filter is?
@barbatosrex9473
3 жыл бұрын
I'm not sure but it has been doing the job. I am upgrading my booth soon too with a bigger exhaust. I'll film it for the channel
@lma331
3 жыл бұрын
@@barbatosrex9473 that be an interesting video for sure
@Tom_H327
2 жыл бұрын
Could you, or would you use this spray on metal? I'm a cheap bastard that cannot afford, and also cannot find anyone to actually chrome some metal parts for me.
@barbatosrex9473
2 жыл бұрын
It would work but it probably won't last as it's made for models and R/C cars. You could however coat it with 2K clear gloss. That would help it out big time
@woodman29
3 жыл бұрын
Would you recommend aqua gloss sealer?
@barbatosrex9473
3 жыл бұрын
I'm going to try out a few clears over it tomorrow and post it in the community section
@woodman29
3 жыл бұрын
@@barbatosrex9473 great thank you
@73chevy22
3 жыл бұрын
I tried doing the exact same as you did on a bezel and it turned out to be just chrome color, no reflection whatsoever. I'm convinced at this point all painted chrome is just a scam.
@angrysocialjusticewarrior
2 жыл бұрын
You have to spray a glossy black base coat before applying chrome paint. If you apply chrome without glossy black, it will just be silver with no shine and no reflection. And when you apply chrome after the black base coat, apply the chrome lightly. The shine and reflection is mostly from the glossy black paint. The chrome paint is just to make the black reflective paint into a more silver reflective paint to make it chrome. and when you are done painting, do not apply clear coat. Clear coat will destroy the reflectiveness and make it a basic silver appearance.
@73chevy22
2 жыл бұрын
@@angrysocialjusticewarrior Great! Thank you for the advice, still trying to figure this stuff out.
@NintenGOD773
3 жыл бұрын
Would I be able to use this on a car grille?
@barbatosrex9473
3 жыл бұрын
This is made more for modeling. I would consider Krylon Foil Silver. The Krylon and Rust-Oleum paints are geared towards outdoor use
@isaacstamper5366
2 жыл бұрын
Would this paint work for gunpla or make the plastic too brittle?
@barbatosrex9473
2 жыл бұрын
Works perfect for Gunpla, it's mostly what I build. It won't make the plastic brittle. It's formulated for plastic
@isaacstamper5366
2 жыл бұрын
@@barbatosrex9473 Alright, thank you for the quick response!
@captainflannel8558
3 жыл бұрын
USE THIS ON RC CAR BODIES SPTAX ROCKS THERE CANDIES ARE NICE TOO and yes thats what its made for on rc car bodies u paint the inside of a clear lexan body
@barbatosrex9473
3 жыл бұрын
Great paint for sure. Super results 👍
@critdub7
3 жыл бұрын
Can you use this on metal or just plastic
@barbatosrex9473
3 жыл бұрын
You can use it on metal but for indoor use only
@MartinFutter70
3 жыл бұрын
You'd never sell it in the UK with a name so close to spastic, some careful trading there by this company
@wordenb1830
3 жыл бұрын
I wouldn't buy it on principal, whoever thought up that name should think again.
@davidhiscock1969
3 жыл бұрын
Just added a similar comment and then seen your post.
@MartinFutter70
3 жыл бұрын
@@davidhiscock1969 it would seem this company didn't run their product name through any kind of database to check for any kind of offense they might cause 🤔
@azliaziz3798
3 жыл бұрын
can this spray paint be used on metal.. I am refurbising some parts off my beetle
@barbatosrex9473
3 жыл бұрын
This particular paint is made for plastics. You might have to look into Krylon or Rust-Oleum
@azliaziz3798
3 жыл бұрын
@@barbatosrex9473 krylon the chrome is not tat shiny… maybe I can give it a try on some metal reflectors for the turn signal thxs
@barbatosrex9473
3 жыл бұрын
@@azliaziz3798 I meant Krylon Foil colors. Check out my test video on them. They come in skinny spray cans
@azliaziz3798
3 жыл бұрын
@@barbatosrex9473 oh .. do u have any link.. maybe I can get these in my country thru ace hardware.. thxs a lot ..!
@bradmason8334
3 жыл бұрын
How would it hold up on plastic in engine bay?
@barbatosrex9473
3 жыл бұрын
These are made for plastic models and R/C cars. I believe you should try something like Krylon Foil Silver or a Rust-Oleum type of paint for that. I did a video on Krylon Foil Gold and copper, you can look that up but they also have a chrome silver
@bradmason8334
3 жыл бұрын
@@barbatosrex9473 will take a look at it, Thanks!. Do you recommend an all in one kit for a beginner & paint booth?
@jaketheisinger1893
2 жыл бұрын
Does not work at all. Got some sent to Australia as I thought it was the best and came out silver like the rest of them
@tinaleanne8230
3 жыл бұрын
Cheaper on eBay
@Blu3ManiC
3 жыл бұрын
There’s a clone of that procon boy by point zero I wonder how they would compare www.amazon.com/dp/B00G5D3VVG/ref=cm_sw_r_cp_api_glt_fabc_53E72FGX57YXHG3B3APP Also whenever you get around to reviewing the paasche H, I saw this clone of it that looks identical by point zero as well, would be interesting to see a comparison of the two. www.amazon.com/dp/B004KNAH0G/ref=cm_sw_r_cp_api_glt_fabc_X78FA3227700R3GS5H9D?_encoding=UTF8&psc=1
@J01466
Жыл бұрын
Good job but you move the objects too much, like you work for QVC or something.
@Diana-wg1tm
2 жыл бұрын
Its $18 😳for mirror paint not $10
@barbatosrex9473
2 жыл бұрын
When I purchased these and filmed the video these cost me $10. They've gone way up since then for sure.
@TECHTRUTHUNVEILED
3 жыл бұрын
Somebody does a good amount of SPEED lol erratic hand movements to the EXTREME lol
@johnjenson5738
2 жыл бұрын
Ok now that you have sprayed plastic ,now try metal!
@desalegnsimon6671
Жыл бұрын
that is the most twitchiest hand I have ever seen on camera. Slow down or zoom out pleas, its nauseating
@kevshort3840
2 жыл бұрын
Hi did you try the metal varnish later and what was the the result? Ps how much is the varnish and where can I get it from as I live in the uk? Thanks for this video very informative and helpful 🇬🇧👍
@GCJT800
2 жыл бұрын
When you touch it does it leave a finger print?
@barbatosrex9473
2 жыл бұрын
Not after 48 hours
@VincentGnawl
Жыл бұрын
BUFF THE SPAZ STIX WITH A MICROFIBER AFTER IT DRIES!!!! IN SECONDS IT GETS WAY BETTER!!
@kuntri4389
2 жыл бұрын
Can this product be sprayed on alloy wheels? And if so would you recommend it do you think it's durable enough.
@joefischetti2383
Жыл бұрын
Thank you! Great video! Just what I needed. I was looking to add chrome to the bumpers and side moldings on my slot cars. This product looks fantastic. You’ve saved me time and money and it’s much appreciated. Be well!
@mountainman4410
Жыл бұрын
Every chrome effect I have ever dealt with, always needed a non solvent bases clear. In other words, water based clear. Any solvant will instantly turn the "chrome" to look like a regular silver base coat. Put a coat or 2 of water based clear, or even a zero voc epoxy over the part first. Allow to dry. Give it a scuff and apply the solvant based clear of your choice.
@Christian-kd2db
2 жыл бұрын
hello friend, how long should the black dry and how long should it dry once chromed to be able to paint over the chrome
@barbatosrex9473
2 жыл бұрын
You can paint the chrome over the black within an hour. The chrome itself dries in a couple hours.
@daviddelgado556
4 ай бұрын
Hi men I need the best chrome paint to paint the bumper of my Chevy 53
@barbatosrex9473
4 ай бұрын
Sorry my friend, the ones I test are for indoor display models
@jamessampson3065
Жыл бұрын
How can I get a few cans?
@GundamFandom
8 ай бұрын
Have you reviewed or will you review the Spaz Stix Holographic spray? It would be helpful to see step by step on what to do & what not to do with the paint. (Just Subscribed. I have watched some of your other paint reviews, like Tamiya's Metallic Gold spray paint. They're very helpful. Keep up the awesome content.)
@njcivicwagon1
3 жыл бұрын
Another great review. I wonder what results you get decanting and shooting out an airbrush....Thanks for sharing. I really appreciate these videos you do! Kutgw
@bigwhop136
2 жыл бұрын
I have a tyco bandit rc car I need to paint the rims chrome wich one do you think is best for me?
@robertramlrez8566
8 ай бұрын
Can it be used on car wheels rims?
@barbatosrex9473
8 ай бұрын
For a model car? Yes, for a real car, no
@jeffreywong5112
13 күн бұрын
Can it last outdoor? I want to paint my helmet chrome mirror? Also will it react on top of white acrylic paint?
@DarksouIjah
Жыл бұрын
I just realized that this is a local company for me. They are primarily into RC cars, so that’s why they came out so well on the plastic trays.
@590DM
Жыл бұрын
My black revolver is on the chopping block
@pradaman307
3 жыл бұрын
When are you going to spray it on metal? Most people have no interest at all in spraying plastic spoons.
@theragingdolphinsmaniac4696
3 жыл бұрын
That's crazy. Looks like a real mirror. You can see everything behind you in the room.
@rickfahning4049
11 ай бұрын
Curious: Spray Spaz Stix Chrome over yellow. Gold?
@Sammikuzz
3 жыл бұрын
What candy colors over that chrome? Is it possible?
@barbatosrex9473
3 жыл бұрын
Yes, you can candy over it. Most candy colors will work.
Пікірлер: 309