I have had my Brothers Scan N Cut 650WX for 4 years and have only used it to cut felt Christmas ornaments. Thank You this was really informative.
@julieverschage3160
Жыл бұрын
Yes please on the acrylic video
@johnk6847
Жыл бұрын
Great video, Courtney. I'm hoping to try the piercing kit soon. A video with that kit and maybe a couple of other kits would make a good video!
@lanettelykens8345
Жыл бұрын
Yes I’d like to see you cut acrylic and embossing.
@michellefrothingham4275
Жыл бұрын
Hi Courtney 👋. Great to see you… this was an awesome video… some reminders of what you have taught us in prior videos… one question re: cutting… i like to do wool appliqué and i would like to place my Steam a seam stabilizer to my wool… so paper side up on my lo tack mat? I question because you mention that we need the fabric to be firmly stabilized… and yet wool has a loose weave… again… thank you
@weikelmd
Жыл бұрын
I would love an embossing video showing how you did your Christmas cards! AWESOME!
@FawnaNazza
Жыл бұрын
Hi Courtney, great video. Just curious what is the DPI for the DX325? Thank you for your informative information.
@timeenuf4200
Жыл бұрын
I recently received a request from a friend to make a large saying using my Standard 12 x 24 and a standard blade as I didn't have either a low tech mat or vinyl cutter. She purchased Cricut Smart & Vinyl Gold. Every time I laid it on the Standard Mat it would bubble in places prior to cut and no tricks I could find on KZitem helped. Have you ever had that happen?
@aliciasteward2635
Жыл бұрын
I have ordered so many blades that I can't count and they are all wrong. I have an SDX125 please tell me what blades to purchase! How can I get my machine to cut 12x24? i doesn't let me use this function.
@bethpowell6650
Жыл бұрын
Hello from south of San Antonio.
@estelamorales5988
Ай бұрын
My machine is two yrs old and hardly used. I moved and wanted to use it but now it doesn’t stay on…😢
@michellefrothingham4275
Жыл бұрын
Thanks!
@crissaducharme4104
Жыл бұрын
I am machine embroidering snap tabs on vinyl using tear away stabilizer and a felt back. Can my can n Cut trim these for me? i did multiples in one hooping
@Cassandra815
Жыл бұрын
If you cut an ornament out of balsa wood, can you also cut a vinyl one and place on top of the wood.
@annphilbeck5174
Жыл бұрын
hello from Providence Forge Virginia
@wendystout7060
Жыл бұрын
I purchased the SDX125E, took it out of the box, scanned an image, started cutting on template plastic, (very thin). It was working fine at first then stopped cutting two thirds of the way. After trying to get it to continue, with no success, I started again with a new piece of plastic. It started and then immediately stopped. I contacted support and they thought my plastic was too thick. So, I then thought to try again using the card stock that came with my machine. It did exactly the same thing. It started cutting and then immediately stopped. I've checked the troubleshooting in the manual, but it's not solving my problem. Any help or ideas would be greatly appreciated! Thank you
@deniselawrence7491
4 ай бұрын
I have heat and bond that is stuck to my low tack mat. I ironed it forever, it should not have stuck. I tried everything to remove it. I can't get it off. I don't know if it will hold with that on the mat? Is there a way to get it off. Scrapping does not budge it. Is my mat ruined? It's brand new!!
@allbrands1976
4 ай бұрын
Hey Denise. Go to the dollar store and pick up the yellow spray bottle of Totally Awesome. Spray your mat, and take an old credit card or scraper tool to remove the paper from the mat. I hope that helps! Barbara.
@tennistaylor1
Жыл бұрын
What is different about the rotary blade and it’s use?
@ArtsiRosi
10 ай бұрын
My machine suddenly stopped loading the mat in the middle of a project. I have an SDX125, brand new. I've tried 3 different mats and my machine says "Mat not recognized" for all. Someone please help before I throw this out the window!
@SusanRichwine
Жыл бұрын
Can you use best press or another starch?
@janejarvis6725
Жыл бұрын
Hi from Pennsylvania
@StuWright
7 ай бұрын
the Brother 3.9inch ScanNCut Scraper Tool is £63 in england, that is expensive, can anyone suggest a cheaper alternative?
@kimlace3875
Жыл бұрын
How do you sent from machine to canvasworkspace it keeps asking to register machine
@tinkfinch1674
Жыл бұрын
Hi Courtney why is it that when i scan in with my scan n cut that I can’t seem to lose the background on the image so i can edit the file. Thanks in advance from the south east UK.
@lindaraines474
Жыл бұрын
I have the same problem!
@pattishelton3169
Жыл бұрын
Hello everyone
@darlamassey9041
6 ай бұрын
Mat not recognized
@lindaraines474
Жыл бұрын
How do you get to be a member
@CourtneyDouthat
Жыл бұрын
Click on the JOIN button right below the video. Sorry I probably should of explained that in the video.
@evelyngoodman2334
Жыл бұрын
The join button is not visible to us
@CourtneyDouthat
Жыл бұрын
@@evelyngoodman2334 Try it on the web version of KZitem. I don't see it on the app.
@SH-dq2cy
Жыл бұрын
Hi everyone
@kimn775
Жыл бұрын
I clicked on university but says file not found?
@CourtneyDouthat
Жыл бұрын
Sorry about that I fixed it.
@kimn775
Жыл бұрын
@@CourtneyDouthat Thank you!
@darlamassey9041
6 ай бұрын
New fresh out of package mat not recognized
@allbrands1976
6 ай бұрын
Please contact the store where it was purchased, and they can help. If it's AllBrands call us at 866-255-2726 =)
Пікірлер: 38