In this video from Alarm Grid, Dylan shows you how to properly replace the batteries in a Schlage WIFI lock. The Schlage Encode BE489 lock takes four (4) AA alkaline batteries. It is important to use only alkaline batteries in these locks. Anticipated battery life is one (1) year with normal use.
00:00 - Introduction
00:44 - Remove Cover
00:49 - Remove Battery Tray
01:23 - Test Lock Function
02:10 - Battery Polarity Details
02:26 - Reinsert Battery Tray
03:06 - Low Battery Icon Demo
03:48 - Outro
The battery pack is located on the inside of the door. Slide the battery cover up and away from the lock. Place your thumb and forefinger on either side of the battery pack and lift straight up. Flip the battery pack over to expose the four (4) AA batteries. Remove all existing batteries, and replace them with good-quality replacement batteries. Be sure to observe proper polarity when inserting the fresh batteries. It is easy to mix this up if you're not careful.
Once the batteries have been replaced, flip the battery tray back over and replace it in the appropriate slot on the lock. Replace the battery cover and verify the lock functions.
www.alarmgrid.com/faq/how-do-...
alrm.gd/get-monitored
Негізгі бет Тәжірибелік нұсқаулар және стиль Schlage WIFI Lock: Changing Batteries
Пікірлер: 8